Discussion in 'Cases, Modding & Electronics' started by DaMulta, Jul 7, 2008.
LOL your picture is upside down^^ Are you drunk?
Its a pos hp case so yeah it is "upside down"^^and the gpu cant have both 90mm fans on it cuz the way it is the gpu touches the card reader slot.
Oh so the picture is right side up the case and all the stuff is upside down.
this is what happens when i orgasm.
I feel sorry for you gf/wife/significant other...
you must be some kind of malfunctioning Robot!
Just preparing a new cruncher
LOL hahaha never thought I would see an SR-2 with only one gpu and that being said (no offence) not a very powerful one. I'm guessing you will be fitting the second fans onto the D14's when you are finished?
Yea, was just booting it up to check I didn't buy a bunch of dead silicone. Was in a rush, so left just one set of fans, didn't put thermal grease.. But it works.
Will get to work on it sometime in the weekend and see what kinda clocks it can do.
No offence taken. It's a cruncher, so it will actually only have that crappy GPU all it's life. Just murdered an icon, i know
Considering what the board's and CPUs cost, it hardly seems like an icon..maybe an icon for excessiveness that really isn't needed, and has no true practical application??
Considering most real dual-CPU boards would have had about a similar GPU(if not WORSE!), I think you're the one to finally do such a rig some justice.
Shh, we'll be labelled heretics. Let's just pretend
Quality sucks I know...
nice position for the 360, i bet that helps induce some RROD
It's surprisingly cool in that corner (not as enclosed as it may seem either) an with it being there it helps dampens the noise from the damn fans in the thing
Nice rocketfish cooler you have there!
I have one too on my 6 core cruncher!
I have the same chair
So is the card reader going to file a sexual harassment against the gpu if the fan does touch it?
Is that a rebranded Hyper TX3?
just to make my mothers rig more overkill i bought her this
this used to be her mobo
specs on the left
Ok my new NZXT Tempest 410 arrived! I got it all put together but ran into some problems with the power switch. I fixed it in no time and shes running good! I took my time and did the best cable management I could have done. It is by far the best looking case I have ever owned. I still have not installed the cathodes but they will be next
This is what the issue was. It seems to have a big pit in the silicon between the solder point and the copper leads. As you see from the second picture I simply soldered both together and it works fine now.
Good catch on the Brandon. I would have probably missed that.
I only caught it cause the damn thing refused to power up LOL, Its a analog connection so I knew there was bound open connection somewhere.
Nice case Brandon! And good job on the switch!
That Heat sick is masive. IS it sucking air right the back of the GPU
Still have some work to do, but for now this will do.
Separate names with a comma.