ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, today introduced new industry-leading, single piece 8 GB DDR3-1600 high-density memory modules. Known for industry-high standards of quality control and meticulous device engineering, the new modules will meet and exceed expectations of customers who seek performance and quality in DRAM products.

With this launch ADATA is continuing its tradition as an industry leader in DRAM product line-up. These 8 GB Premier Series DDR3-1600 single piece memory modules allow users to boost system performance over the limitations of memory slot availability.

ADATA introduced a new value consumer SSD in its 300 Series, the S396 30 GB. Built in the conventional 2.5-inch form-factor, the drive makes use of the SATA 3 Gb/s interface. The drive offers sequential read speeds of up to 280 MB/s, up to 250 MB/s sequential write speeds, and up to 44,000 IOPS 4K random write performance. If those speeds hold up, the ADATA S396 30 GB should make for a decent entry-level SSD. Unfortunately, we don't have a price at hand.

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, has launched a new USB 3.0 Flash drive, the S107. The S107 offers a new approach to shock-resistant designs and SuperSpeed USB 3.0 interfaces, with a sporty outlook and dynamic design to satisfy the needs of active consumers who want to express their own personal style.

Targeting the modern crowd with an on-the-go and mobile lifestyle, the S107 combines a sporty modern look with military grade shockproof and water-resistant construction. The S107 drive exterior is constructed of a unique silicone rubber, providing excellent reliability, making it ideal for traveling and excursions. Users need not worry about data loss from accidental drops or spills, which can cause irreparable damage in conventional storage devices.

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, today introduced new industry-leading, single piece 8GB DDR3-1333 high-density memory modules. Implementing state-of-the-art technology and strict control of the production processes, these modules provide professionals and enthusiasts with new heights of high-speed computing experience.

ADATA is committed to providing high performance and stable memory solutions. This single piece 8GB Premier Series DDR3-1333 memory module series supports advanced user and professional data operation needs. With the limited space available on many motherboards, an insufficient number of DRAM slots is a common dilemma. This most recent advance in density further allows consumers to easily enhance overall system performance.

A month after debuting its Premier line of mainstream DDR3 memory modules, A-Data released new high-density 8 GB modules in the series. Available in both desktop UDIMM and notebook SO-DIMM form-factors, A-Data's new modules operate at PC3-10700 (DDR3-1333 MHz) speeds with CAS latency of 9T, and DRAM voltage of 1.5V. The new modules make use of 4 gigabit memory chips made possible in the mainstream segment by advancements in silicon fab processes. Unfortunately, the pricing isn't quite "mainstream" yet. One of these 8 GB Premier modules by A-Data could set you back by €159.90. They are backed by limited lifetime warranty.

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, has launched a full range of USB 3.0 products. This USB 3.0 product lineup from ADATA offers a comprehensive range of styles, all of which incorporate new heights of performance excellence, leading consumers to experience the new era of USB 3.0 whirlwind speed.

After ADATA announced the different functionality and high performance USB 3.0 hard drive solutions SH14 & SH12, the constant pursuit for high quality, high efficiency, and the differing needs of consumers has spurred the company to re-launch its USB 3.0 flash drive line. This first new launch includes three models of ADATA USB 3.0 Flash drive: the N005 Pro, the first choice for those looking for professional performance, and the performance and value entries S102 Pro and C103. The N005 Pro and S102 Pro are advanced versions offering professional performance and improved overall speed, more than twice that of previous models.

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, today announced the launch of its new Premier Pro DRAM modules.

The Premier Pro DRAM modules are designed for IT professionals who need to deliver rock-solid quality computer systems to their customers. The quality of ADATA Premier Pro modules are enhanced in two aspects. First, the modules are engineered for long term reliability. "When memory devices are not reliably engineered," said Ukyo Jeong, Vice President of DRAM product engineering at ADATA, "there is very high chance that the memory module will fail within the first year of usage." He continued: "a 1.6 to 3.2% rate of system failure due to problems with DRAM is not acceptable for IT professionals, and this is the typical failure range when a DRAM module uses components that are not subjected to burn-in process."

Following up on the successful launch in May this year of the S511 SATA III solid state drive, which received an enthusiastic industry response and multiple awards, ADATA Technology has introduced the industry's fastest high-performance XM13 mSATA solid state drive. This display of the company's increasingly strong R & D capabilities establishes a firm foundation for ADATA in the Small Form Factor (SFF) applications market.

The "rapid start" usage of Tablet PCs has had an impact on the consumer desktop market, causing rising hopes and expectations for performance. The future market is expected to demand that boot devices combine the power of rapid, efficient operation with a thin profile and price competitiveness. To this end, ADATA has set its sights squarely on the market trends of the near future, applying the full force of the company's development capability and years of experience in memory storage. The result is the introduction of the XM13 mSATA SSD, incorporating mSATA memory cache, low power consumption, and implementing the latest Sandforce controller.

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, today announced the release of the S510 Solid State Drive (SSD), a mid-range version of the company's flagship S511. Implementing the SATA III (6Gb/sec) specification, the S510 is aimed at the growing pool of users who recognize the cost and performance advantages of solid state drive upgrades for both desktop and portable computers.

The performance advantages of the SATA III transfer specification are becoming well-known among consumers, and the S510 capitalizes on this trend with native support through adoption of the SandForce SF-2200 series chip. Its read and write speeds are twice that of SSDs using the older SATA II specification, and in real world test simulations reached 550/510MB read and write speeds respectively, with 4K random write speeds as high as 85,000 IOPS.

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, today announced the launch of the NH13 portable hard drive. Geared towards business and professional users, the NH13 sports a USB 3.0 interface and a classic metallic finish.

For users of netbooks and USB compatible mobile devices, the NH13's stylish color options: glossy black and lustrous silver, make it an ideal digital accessory that adds class to any ensemble. The sleekly designed aluminum case provides scratch resistance and a sophisticated touch to data mobility.

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, announced its latest product offering aimed at satisfying the needs of extreme gamers. In an industry first, the company has launched the single 8GB XPG Gaming Series DDR3L 1333G Desktop overclocking memory. With a high density of 8GB and low voltage of only 1.35V, it is anticipated to provide excellent system performance and overclocking capabilities to meet the requirements of power users and overclockers.

ADATA DRAM product planning department project manager Alex Wu explained, "With the popularity of 64-bit operating systems, high-density memory is a prerequisite in many gamers' minds. We are the first to launch DDR3L 1333G high-density 8GB memory modules, achieved in the XPG Gaming Series". He further stated: "This product adopts a 1.35 volt design, to offer gamers excellent stability and efficiency and also reduce waste heat and power consumption costs". The XPG Gaming Series DDR3L 1333G desktop overclocking memory features high density and low voltage, helping gamers achieve the ultimate in system effectiveness. At the same time, the reduced power consumption leads to lower carbon emissions, resulting in greater environmental sustainability.

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, today announced the first shipments of its highly anticipated S511 solid state drive (SSD). ADATA is hardly a newcomer to the SSD field; however the S511 is the company's first foray into the latest SATA 6 Gb/sec specification that employs the SandForce SF-2200 series controller. The timing of this release is consistent with the company's historical balance of speed and thorough testing of new technologies.

According to YJ Choi, Senior Vice President at ADATA. "ADATA does comprehensive testing and review before bringing products to market, to ensure that our customers enjoy a worry-free experience for their systems and data. We are confident that the S511 will provide dependable performance at industry-leading transfer speeds."

Intel's Smart Response technology is doing wonders to the low-cost SSD market. The technology lets low-capacity, usually low-cost SSDs to be used as caches for hard drives, improving the system's overall responsiveness. The technology makes these low-cost SSDs more of a component than a product (such as 2.5-inch SATA SSDs), and hence it makes sense to offer them in the mSATA form-factor. Intel made its headstart by launching the Intel 311 "Larson Creek" series 20 GB SSD that comes in both 2.5-inch SATA 3 Gb/s and mSATA form factors. While mSATA makes it easy to deploy the technology into notebooks, desktop motherboard vendors such as Gigabyte thought it would be nice to give their motherboards an mSATA slot.

Capitalizing on this very market is A-Data, with a couple of new low-cost mSATA SSDs in the ISFM series. First is the ISFM-XM13, an mSATA SSD driven by a SandForce SF-1200 series controller. Even with some of the controller's channels unoccupied (due to obvious lack of space to put NAND flash chips), this card doles out decent transfer rates of up to 250 MB/s read and 170 MB/s write. This card comes in capacities of 30 GB (32 GB with 2 GB overprovisioned) and 60 GB (64 GB with 4 GB overprovisioned). This card uses MLC NAND flash. Next up, is the ISFM-IXM01, that looks to be using a JMicron-made controller. The bigger difference here is the use of SLC NAND flash on one of its two variants, which traditionally offers higher rewrite cycles. The other variant uses MLC NAND flash. The SLC variant offers transfer rates of 90 MB/s read and 90 MB/s write, and comes in capacities of 2, 4, 8, and 16 GB. The MLC variant gives you 150 MB/s read, 120 MB/s write; and comes in capacities of 32, 64, and 128 GB.

ADATA Technology, a worldwide leading manufacturer in high-performance DRAM modules and NAND Flash application products, today introduced its latest XPG Series DDR3L 1333MHz 4GB dual-channel kit memory. The modules feature high-density, low timing and low voltage, enhanced system stability, and improved performance to meet market needs and especially those of gamers.

The latest XPG Plus series DDR3L 1333+ is available in 2GB single channel and 4GB dual channel kits, with latency of 8-8-8-24. The utilization of an exclusively designed aluminum heat sink and high quality circuit board ensures high efficiency and stability of the memory modules. The Gaming Series DDRL 1333G 4GB dual channel kit has latency of 9-9-9-24. They employ the same special heat sink design, and can effectively reduce running temperature to extend the life of the module.

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, today announced the release the S511 Solid State Drive (SSD), which employs the latest SATA 6Gb/s specification. With this cutting edge implementation of the latest data transfer standard, the performance of this SSD has been dramatically raised over conventional SATA II products.

The S511 utilizes the new generation SandForce SF-2200 series chip, with native support for the SATA 6Gb/s platform. Its read and write speeds are twice that of SSDs using the older SATA II specification, and in real world test simulations reached 550/520MB read and write speeds respectively, with 4K random write speeds as high as 60,000 IOPS. For consumers, this means transferring 5GB media archives can be completed in as few as 15 seconds. In actual testing of Windows 7 boot speed, the S511 cruised to an impressive 25 second system boot time.

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, today announced the launch of its latest series of power supply for personal computers. The BN Series is targeted towards consumer and professional users who are looking for economical solutions in energy efficient power.

With 80 Plus Bronze certification, the BN series offer up to 85% efficiency, while the 95% Active Power Factor Correction (PFC) minimizes power loss. The series comes in four wattage models to meet a wide range of individual user needs, and all models meet both the European Energy Using Products Directive (EuP) and The American Energy Star 5.0 standard. The units run quietly and emit extremely low levels of interference.

A-Data introduced its USB 3.0 SuperSpeed supporting Classic CH11 series portable hard drives. Available in chic pearl white, hot pink, and matte black, CH11 comes with labels to help identify the type of stored data. Maybe they want us to buy many of them for the purpose. The 5 Gb/s interface allows its 2.5-inch HDD to deliver transfer speeds of up to 90 MB/s. Available in 500 GB, 750 GB, and 1 TB capacities, A-Data's Classic CH11 portable hard drives are priced at €52.73, €70.22, and €84.72, respectively.

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, today announced an expansion of its XPG Gaming Series V2.0 product line with high capacity DDR3 memory modules, DDR3 1866MHz and 2133 MHz

In this latest release, ADATA not only presents performance-focused memory kits, but also demonstrates a continued dedication to high capacity memory kits for the market. Both new XPG 2133G and 1866G modules run at CL 9-11-9-27 timing with 1.65 Voltage, featuring 2oz double-copper PCB (Printed Circuit Board) and aluminum heat spreaders with Thermal Conductive Technology (TCT). Each memory chip is directly in contact with heat spreaders to achieve immediate heat dissipation.

A-Data expanded its high-performance notebook memory lineup with a new XPG Gaming Series DDR3 SODIMM module that's capable of PC3-12800 specifications, with low DRAM voltage. The 4 gigabyte module can operate at DDR3-1600 MHz speeds with latencies of 9-9-9-24, and voltage ranging between 1.35V and 1.4V. The module packs its PC3-12800 settings into an XMP profile, which can be activated on notebooks that support XMP. It is available as a 4 GB single piece, or in an 8 GB (2x 4 GB) dual-channel kit. The company did not give out pricing information.

ADATA Technology, the worldwide leading manufacturer in high-performance DRAM modules and NAND Flash application products, today introduced its new series USB 3.0 flash drives, available immediately.

The new USB 3.0 standard interface is picking up speed among users and manufacturers. ADATA is listening to the requests of early adapters, who are eager to see this new standard incorporated into a wide range of products. This launch of the S102 USB 3.0 flash drive, which uses the native USB 3.0 controller chip, is ADATA's competitively priced entry into this relatively new market segment. It provides consumers with a compelling reason to upgrade, and will likely cause more people to say an official goodbye to USB 2.0.

ADATA Technology, after listening attentively to the voice of the market, ADATA has launched a new product in its Superior series of flash drives, the S101. Produced under advanced COB (Chip On Board) manufacturing processes, the S101 is a compact and delicate technological jewel. High quality black leather exterior with a unique and comfortable toothed texture allows you to manifest your personal sense of elegance, at a price the stays true to your sense of moderation.

ADATA Technology, the worldwide leader in DRAM modules and flash memory products, today released its latest Micro Memory Card Reader, the microReader version III, an ultra-compact and stylish solution for easy and convenient data transfers between mobile phones and PCs via High-Speed USB 2.0 interface.

For users of digital devices who are constantly on the go, moving and sharing personal files from memory-enabled phones to other devices can be a hassle when there is no USB cable on hand. Weighing just 3 grams, and the size of a small coin, the new ADATA microReader is one of the smallest card readers available on the market, with incredible portability that provides the freedom of data transfers any time, any place. Due to its ultra-compact size, the microReader can be plugged into the USB slot of a notebook PC at all times, without blocking the neighboring slots or getting in the way when the computer is stowed in a bag.

A-Data expanded its XPG-Gaming Series V2.0 series with a new 8 GB (2x 4 GB) dual-channel DDR3-2000 MHz kit. The modules are capable of DDR3-2000 MHz speeds with DRAM timings of 9-11-9-27T and module voltage of 1.55~1.75V. They make use of 2 oz. copper PCBs and aluminum heat-speaders making use of Thermal Conductive Technology (TCT). A-Data's new kit is backed by a lifetime warranty. Its pricing remains to be known.

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, announced a boost to its XPG Gaming Series DDR3 lineup with a 2400G 4GB dual channel kit to satisfy computer gamers' increasingly stringent demands for high capacity and performance DRAM Modules.

The new XPG DDR3 2400G runs at an operating voltage of 1.65 volts with CL value 9-11-9-27, allowing for predicted bandwidth up to 38.4GB per second. Each XPG Gaming v2.0 Series memory chip is selected through a strict filtering process, complete with superior 8-layer PCB (Printed Circuit Board) and unique TCT (Thermal Conductive Technology) that effectively lowers module temperature. Each memory chip is in direct contact with the heat spreaders for better heat dissipation, improved power consumption, and prolonged lifespan. The XPG DDR3 2400G also supports the Intel XMP (Extreme Memory Profiles) which help provide easy configuration for power users.

ADATA Technology Co., Ltd., a worldwide leader in high performance memory and flash products, has announced the launch of the HM Series power supply for personal computers. The HM Series has a PF (Power Factor) of 0.9 up and energy efficiency up to 82%, and is designed for the gamer, high-performance, and overclocker markets.

Available in a range of wattages (550, 650, 750, 850 and 1,200 watts), the HM Series delivers reliability and protection for all types of hardware configurations. In particular, the units are equipped with an intelligent dual ball bearing LED fan with a tri-color output power display. The power consumption status is indicated by the color of the display (green for low load; blue for normal load; red for full load). The HM Series is constructed with all Japan-made capacitors for voltage regulation, filtering, and buffering functions, resulting in long-term power output stability, with MTBF (Mean time between failures) of over 100,000 hours. The high ratio of output to input power has earned the HM Series the 80 Plus Bronze certification for energy efficiency.