News Posts matching #AM2

Return to Keyword Browsing

Scythe presents Kotetsu Mark II & Choten TUF Gaming Alliance Coolers

Japanese cooling expert Scythe presents two special editions of its CPU Cooler models Kotetsu Mark II and Choten as part of the ASUS TUF Gaming Alliance series. Both products bundle their unique advantages with the fancy design of the TUF Gaming Alliance series and gorgeous RGB illumination.

Scythe Kotetsu Mark II TUF Gaming Alliance Edition is based on the award-winning Kotetsu Mark II, offering outstanding performance even for overclocking purposes at impressively low noise levels. The Scythe Choten TUF Gaming Alliance on the other hand, aims for much more compact PC case environments while providing excellent balance between size, compatibility and performance.

Gelid Launches GX-7 Rev. 2 CPU Cooler

Thermal Solutions specialist GELID Solutions reveals the Rev. 2 GX-7 CPU cooler of its GAMER product line. Engineers at GELID Solutions have upgraded the award-winning GX-7 to the Rev. 2 GX-7 by adding the Slim 12 PL Blue fan and the multi award-winning GC-Extreme thermal compound. Contrary to traditional heat pipe arrangement the Rev. 2 GX-7 offers a special array of heat pipes to take full advantage of all 7 heat pipes heat transfer capacity. Further V-shaped aluminum fins were used in the center of the heat sink to allow airflow to reach the heat sink more evenly. Openings inside of the heat sink and near the heat pipes let fresh-air flow in from the top and the bottom to the zones where normally poorly ventilated and eliminate the creation of hotspots. The unique heat sink shape supports dual fans.

Evercool Announces HPR 9225EA CPU Cooler

Evercool announced the HPR 9225EA entry-level tower-type CPU cooler. It uses a stack of 43 aluminium fins, to which heat is conveyed by two 6 mm-thick copper heat pipes, which make direct contact with the CPU at the base. The stack is ventilated by a 92 mm fan that spins at speeds up to 2,200 RPM, pushing 35.6 CFM of air, with 26.3 dBA noise output. Measuring 97 x 73 x 118 mm (WxDxH), the cooler weighs about 400 g. It supports most modern CPU socket types, with the exception of LGA2011. Among the socket types supported are LGA115x, LGA775, AM3+/AM3/AM2+, and FM2/FM1. The company did not give out pricing information.

AMD Rolls Out Athlon II X2 280 Value Dual-Core Processor

It's not retirement time for AMD's 45 nm "Regor" silicon just yet, with the company announcing the Athlon II X2 280 value dual-core processor. Built in the socket AM3 package (compatible with AM2/AM2+/AM3/AM3+ motherboards), and based on the company's K10.5 micro-architecture, the chip features two x86-64 cores clocked at 3.60 GHz, 1 MB of L2 cache per core (2 MB total), an instruction set that includes SSE3 and SSE4A, and a dual-channel integrated memory controller that supports both DDR2 and DDR3 memory types. The chip can take advantage of HyperTransport 3.0 interface, with a maximum data-rate of 4.0 GT/s. It features a rated TDP of 65W, and is designed for entry-level desktops. It is priced at US $49.99.

Phanteks Launches PH-TC12DX Series CPU Cooler

Phanteks launches PH-TC12DX, a U-Type dual tower heat-sink with four 6mm heat-pipes allows for optimal airflow and cooling. PH-TC12DX's 6mm heat-pipes are linearly aligned and developed to have the least amount of air and thermal resistance. Incorporating P.A.T.S and C.P.S.C Technologies, PH-TC12DX delivers better heat dissipation and heat transfers. PH-TC12DX includes dual PH-F120HP PWM Premium fans to allow for higher performance and/or silent operation.

Scythe Apsalus Liquid CPU Cooler Detailed

Scythe released the Apsalus entry-level liquid CPU Cooler (model: APSALUS3-120). Based on an Asetek platform, the pre-assembled (maintenance-free), closed-loop cooler uses an exposed copper base with pump assembly, joined the the 1U 120 mm radiator that packs the reservoir, which is ventilated by a 120 mm Scythe-made fan. The base measures 72.3 x 72.3 × 27.3 mm, the radiator 120 x 150 x 27 mm (excluding the fan), and the coolant pipes are about 326 mm long. The cooler supports all modern CPU socket types, including LGA2011, LGA115x, LGA1366, FM2/FM1, and AM3+/AM3/AM2+/AM2. It is priced around 6,980¥ ($84).

Cooler Master Seidon 120M Liquid CPU Cooler Detailed

Cooler Master's new line of liquid CPU coolers include the Seidon 120M. The self contained (closed-loop) cooler combines a 150.3 x 118 x 27 mm aluminum fin radiator with a copper micro-channel block. The radiator and block+pump unit are factory fitted with flexible tubes. The radiator makes use of a 120 mm 600~2400 RPM PWM-controlled fan with 19~40 dBA noise output. The pump, on the other hand, can be as loud as 17 dBA. The cooler will include retention modules for all popular CPU socket types, including AMD AM3+/AM3/AM2+/AM2, FM2/FM1, Intel LGA1155/1156, LGA2011, LGA1366, and LGA775. Pricing and availability information is not available.

EKWB Supremacy Elite Series CPU Water Blocks Start Shipping

EK-Supremacy Elite, the premium bundle containing the best CPU water block on the market and the best thermal interface on the market - the EK-TIM Indigo Xtreme - is now finally shipping. Please note that due to high demand this product may be shown as out of stock at the time of purchase. These water blocks are therefore manufactured on daily basis to ensure adequate supply and daily re-stock.

EK-Supremacy Elite is the premium bundle containing the best CPU water block on the market - the EK-Supremacy - Full Nickel - and the best thermal interface on the market - the EK-TIM Indigo Xtreme. EK-Supremacy is a universal CPU water block that fits all modern CPU sockets with a universal mounting mechanism that offers error-preventing, tool-less installation. The result is a perfect installation which results in perfect performance every time. EK-Supremacy is truly the best product for performance seeking enthusiasts.

Gelid Announces Slim Silence A-Plus – 1U Slim ITX 2 Power Heatpipes CPU Cooler

Thermal Solutions specialist GELID Solutions has upgraded its multi-winning "Slim Silence AM2" to "Slim Silence A-Plus" which is compatible to all updated socket of AMD.

With a compact heatsink design for Mini ITX, Micro ATX, ATX, HTPC, Panel PC, Car PC and 1U server the "Slim Silence A-Plus" contains two power heatpipes and a silent fan with PWM function. The high performance heatpipes ensure a fast and efficient heat transfer from core to aluminum fins. The frameless silent fan includes a ball bearing and a GELID intelligent PWM (Pulse Width Modulation) control which ensures a silent operation at low CPU temperature and accelerates the fan speed when necessary.

DeepCool-Aeolus Big Frost Dual-Tower CPU Cooler Detailed

After a brief sighting at Computex 2012, we come across the Aeolus Big Frost dual-tower CPU cooler again. This time, the cooler appears polished and ready for market launch. The cooler is a simplified version of DeepCool's Assassin, retaining its dual aluminum fin tower design. The design consists of two symmetric aluminum fin stacks, through which six 6 mm-thick copper heat pipes pass, drawing heat from a copper CPU base. The fin-stack is then ventilated by two 120 mm fans in push-pull configuration.

The heatsink measures 126 x 136 x 159 mm, weighing 1,109 g (including fans). The fan pushing "fresh" air through the first fin stack is configured to spin at speeds of up to 1,300 RPM, with noise levels as high as 22.6 dBA, while the fan pulling air and conveying it to the second fin stack spins at speeds ranging in 900-1,500 RPM, with 21.4 to 32.1 dBA noise levels. The Big Frost supports a full range of CPU socket types available in the market today, including Intel LGA2011, LGA1155/LGA1156, LGA1366, LGA775, AMD AM3+/AM3/AM2+/AM2, and FM2/FM1. In China, the cooler is expected to sell for 200 RMB (US $32).

Prolimatech Black Series Genesis CPU Cooler Launched

Prolimatech, the master of cooling is going a step further after the success of the Prolimatech Megahalems by presenting another revolution in CPU cooling with the limited edition Prolimatech Black Series Genesis. Besides the immaculate quality - which is present across their entire product line-up - the Black Genesis sets new standards in cooling capability and cool looks.

Prolimatech continues the trend set by the Megahalems and Super Mega by utilising two separate towers, but instead of placing them next to each other, they have been rearranged for maximum performance. The large array of cooling fins can hold up to three 120 or 140 mm fans, two of which can be installed right out of the box with the included mounting materials. Besides keeping the CPU cool, the construction allows for direct air flow across critical areas like the memory and power phases of the system.

GELID Shows Off Black Edition Gamer CPU Cooler

GELID Solutions showed off its newest Gamer series Black Edition CPU Cooler (doesn't carry a GX## model number). The cooler's design consists of a dark aluminum fin dual-tower design à la NH-D14, Corator DS, etc., and uses no less than seven heat pipes (3x 8 mm-thick and 4x 6 mm-thick) to transport heat from the base to the aluminum fin stacks. In the space between the two fin-stacks, a standard-size 120 mm (25 mm-thick) fan pulls air through the first stack, and pushes it through the second one. Pushing in fresh-air through the first stack is care of a slim 120 mm (15 mm-thick) fan. The cooler will be designed to be compatible with all modern CPU socket types, including LGA2011, LGA1155/LGA1156, LGA1366, AM3+/AM3/AM2+/AM2, and FM2/FM1.

Alpenfohn Matterhorn Pure Edition CPU Cooler Launched

Cooling specialist Alpenföhn presents their newest addition to the Matterhorn line of performance coolers. Dubbed the Matterhorn Pure, it focuses on delivering the best possible cooling at the best possible price. Even with its untreated surface, the Matterhorn Pure impresses with the same high quality which Alpenföhn is known for.

Weighing in at a solid 660 grams without a fan, the cooler manages to impress with plenty of heat dissipation area. But Alpenföhn has ensured, that the material used has been employed properly utilizing the same design as the Matterhorn cooler, but leaving out the Nickel plating to allow the cooler to be offered at the best price point possible. The Pure still offers six heatpipes which make direct contact with the heat spreader of the CPU and thus manages to impress with great performance as well.

Phanteks Launch PH-TC14CS Series C-Type Premier CPU Cooler

European cooling expert Phanteks expands its product portfolio with the PH-TC14CS C-Type CPU Cooler. The PH-TC14CS measures 160 x 151 x 140.5 mm ( with dual fans), it weighs 900 grams, has five nickel-plated 8mm copper heat-pipes, and supports the latest LGA 2011/ 1155/ 1156/ 1366/ 775 and AMD FM1/ AM3+/ AM3/ AM2/ 2+/ AM3 micro-processors. Featuring Phanteks patented Physical Antioxidant Thermal Shield ( P.A.T.S) and Cold Plasma Spraying Coating Technology (C.P.S.C), PH-TC14CS provides a perfect cooling solution for low profile setups. Enthusiasts with HTPC's or multimedia cases can achieve maximum cooling while maintaining quiet performance.

Enermax ELC-120 CPU Cooler Pictured

Enermax showed off the ELC-120, one of its first closed-loop (self-contained) CPU liquid coolers. While the cooler looks very similar to several other products in its class, Enermax claims to have dropped in some innovations of its own, such as a unique copper micro-channel base, which improves heat dissipation to the coolant, a powerful ceramic bearing pump for higher coolant flow, and Enermax' very own 120 mm Twister Bearing fan, that's silent, and comes with a very long life. The ELC-120 supports all current CPU socket types, Intel LGA775-thru-LGA2011, and AMD AM2-thru-FM1.

Titan Sibera TTC-NC55TZ(RB) CPU Cooler Pictured

Titan Technology unveiled its latest Siberia CPU Cooler, the TTC-NC55TZ(RB). The cooler has an asymmetric aluminum fin tower design, which cools other hot components on the motherboard along with the CPU. The design consists of a nickel-plated copper base, from which five copper heat pipes pass. One end of these heat pipes pass through an aluminum fin stack that propagates along the plane of the motherboard, while the other passes though a stack that propagates perpendicular to this plane.

The stack that's along the plane of the motherboard is the larger of the two, and is ventilated by a 140 mm fan. The perpendicular stack is ventilated by a smaller 120 mm fan. The 140 mm fan spins at 700 ~ 1,800 RPM, pushing 34.78 ~ 89.43 CFM of air, with a noise output of 8.3 ~ 28.8 dBA. The 120 mm fan, on the other hand, spins at 800 ~ 2,200 RPM; pushing 24.23 ~ 66.2 CFM, with 15.0 ~ 35.0 dBA noise output. Both fans have 4-pin plugs and support PWM control. The heatsink itself measures 200 x 130 x 162 mm (WxDxH), weighing 755 g. All current sockets, including LGA2011, LGA1366, LGA1155/LGA1156, AM3+/AM3/AM2+/AM2, and FM1 are supported. It is priced at 6,980 JPY (US $91.6).

Arctic Shows Off Freezer i30 and A30 CPU Coolers

Arctic showed of two nearly-identical CPU coolers, the Freezer i30 and Freezer A30. The two are identical till the point where the i30 is designed for Intel sockets only (LGA2011, LGA1155/1156), while the A30, for AMD sockets only (AM3+/AM3/AM2+/AM2). The two share a tower-type aluminum fin-stack heatsink design, capable of handling thermal loads of up to 320W.

The heatsink uses four 8 mm thick exposed-copper heat pipes that make direct contact with the CPU at the base, and pass through the heatsink, which is then ventilated by a 120 mm PWM-controlled fan with a fancy-looking frame. Rubber standoffs attach the fan to the heatsink dampening vibrations. The retention clips come attached to the heatsink out of the box. A 0.5g syringe of Arctic MX-4 compound is included, while the coolers' base don't come with the compound pre-applied.

Zero Infinity CPU Coolers Brought to Europe

The colored coolers from Zero Infinity are now available for pre-order at Caseking.de. The violet fan blades and accents define the look and feel of these new cooling units. The top model by the name "Free Flow+" impresses with three fans in combination with direct touch heatpipes and dual tower design, allowing it to cool even the hottest and fastest processors with ease.

Based in Hong Kong, the new brand aims to turn the heads of the enthusiast crowd. The name: Zero Infinity. "Zero" and "Infinity" present two opposite aspects for many mathematician, physicists and philosophers , while still distinctively connected to each other.

Coollaboratory Announces ALPHEOS Series CPU Water Blocks

After extensive development work our newest product is on the market available. The Coollaboratory ALPHEOS Liquid Cooler offers by its perfectly co-ordinated aquifer system a brilliant cooling efficiency.

By the multiplicity of the superfine lamellas, which have a small distance too each other, results an extreme flow rate which dissolves the warm-restraining boundary layers. Thereupon the Coollaboratory ALPHEOS Liquid Cooler catapults itself into the best regions of all available water cooler at the market in the matter of cooling performance. It was provided on basis of computational fluid dynamics, therefore all death water zones were eliminated, which additionally affects the cooling performance positively.

Zalman Intros CNPS20LQ CPU Cooler

Zalman took its first dip into water cooling after a while, with the CNPS20LQ, a self-contained (closed loop) CPU cooler. Designed and made originally by Asetek, a well-established brand name in OEM water cooling solutions, the CNPS20LQ uses a single-fan (dual-fan capable) radiator design. Its radiator measures 120 (W) x 158 (L) x 25 (H) mm. The radiator houses a small reservoir. The block houses a pump, which draws power from standard 4-pin CPU power header, and supports PWM control. The two are connected by flexible tubing. The block features a copper base with pre-applied thermal interface material. The CNPS20LQ supports all current socket types, including Intel LGA2011, LGA1155/1156, LGA1366, LGA775; AMD AM3+, FM1, and AM3/AM2+/AM2. It is priced at €69.90.

PHANTEKS TC14PE Now Available for Purchase

The high-end CPU-Cooler from the newcomer PHANTEKS is available immediately at Caseking.de. This cooler with the name "TC14PE" already managed to receive numerous awards for its excellent performance. PHANTEKS employs multiple features to achieve such extraordinary results: a patented surface at the nano-level, twin tower design and two high-performance 140 mm fans. For the perfect looks to go with the installed hardware, the cooler is available in blue, orange red or silver.

The young company PHANTEKS has invested more than two years into the development of the TC14PE CPU coolers, as their goal was not simply to produce a good CPU cooler, but to lead the performance charts. Instead of focusing on the best heat dissipation of an open test bench, PHANTEKS has made sure that the TC14PE performs best in its intended setting - a closed system.

Enermax Announces the ETD-T60 Series Top-Flow CPU Coolers

With clever ideas and technical novelties, Enermax brings a breath of fresh air into the CPU cooler market - in the true sense of the word, because the innovative construction of the Enermax CPU coolers significantly enhances the air stream conduction and heat dissipation. The manufacturer integrated small spoilers, the so-called Vortex Generators, on the fins of the new ETD-T60 cooler to lead the air stream closely along the heat pipes and to avoid the development of hot spots in the back of the heat pipes (so-called Vortex Generator Flow/VGF).

By utilizing the difference in pressure between the warm air inside the heat sink and the colder air outside, Enermax further improved the air supply: The CPU cooler sides are not fully closed, so that additional fresh air can be sucked into the heat sink (so-called Vacuum Effect Flow/VEF). Both effects, VGF and VEF, have been proved successfully with the side-flow series ETS-T40.

Spire Announces Kepler Series Universal CPU Coolers

The Spire all new Kepler universal micro-processor cooler series are direct contact heat-pipe solutions for Core i3/i5 and i7 from Intel and the AMD AM2/3/FM1 micro-processors. There are three (3) different models ranging from two up to four 6mm sinter powder heat-pipes which are in direct contact with the cpu heat-source, dissipating heat effectively and fast.

The high density fins are crowned with a powerful fan for high airflow and great cooling performance. The 92mm dc fan provides ample airflow and silent cooling at 19.0dBA. Compatibility is ensured with the multi-platform mounting clip for Intel 775/1155/1156 sockets and AM2/AM3/FM1 micro-processors. The Kepler series from Spire are build to deliver great cooling for maximum system performance.

GlacialTech Launches Igloo H46 & H58 Series CPU Coolers

GlacialTech Inc., a diverse provider of cooling, power supply and PC enclosure solutions for consumer and industrial applications and a world-class provider of cost effective cooling components and chassis launches the latest Igloo H46 & H58 Series CPU coolers with Intel LGA1155/1156 and AMD FM1 / AM2 / AM2+ / AM3 sockets. The unique design provides good cooling effect to the components around the CPU.

As is usual, GlacialTech comes out with a product that provides highest quality materials and workmanship. The design is clear and functional. The manufacturer decided to waive all creative elements that may have negative influence on the cooling performance. Users can choose out of two different models. The attached PWM fan is certainly equipped with the durable and silent bearing. Price performance, noise performance and weight performance are GlacialTech's three principle design philosophies.

Alpenfohn Announces K2 Twin-Tower CPU Cooler

Alpenföhn is aiming at the performance crown under the CPU coolers with the K2. For this, Alpenföhn is employing two cooling towers and ships the unit with two, potent Wing Boost fans. The middle fan with 140 mm is intended to keep the air flow at a maximum, while the smaller 120 mm unit in front is meant to offer maximal compatibility to modern mainboards, while still providing impressive air flow. Those wanting to go even further may install a third fan in the rear of the cooler. The Alpenföhn K2 CPU cooler is available immediately at Caseking.

The cooler utilizes an incredible amount of materials with a massive weight of 1050 grams. Using more mass does not simply equate to greater performance, as only an intelligent use of such will make for a great cooler and this is something the Alpenföhn engineers are certainly experts in. Eight heatpipes are embedded in a Copper, with both aspects featuring a high-quality Nickel plating. On top of that, all contact points between cooling fins, heatpipes and ground plate feature high-quality solder points to maximize the potential of the K2.
Return to Keyword Browsing
Oct 6th, 2024 12:04 EDT change timezone

New Forum Posts

Popular Reviews

Controversial News Posts