G.SKILL International Co. Ltd., the world's leading manufacturer of extreme performance memory and solid-state storage, is proud to release the Ripjaws 4 DDR4 3400MHz 16GB (4GBx4) memory kit at CL 16-16-16-36, and a new Ripjaws 4 DDR4 3200MHz 16GB (4GBx4) memory kit with a faster CL15 timing. These extremely high end memory kits also come with awesome Turbulence III memory fans.

The new Ripjaws 4 DDR4 3400MHz 16GB (4GBx4) memory kit is made from hand-picked IC and G.SKILL's highly-selective binning process. It has also been tested for compatibility on the Asus Rampage V Extreme and Gigabyte X99-SOC Champion motherboards, shown in screenshots below.

EVGA is proud to announce that the EVGA X99 motherboard lineup is one of two motherboard manufacturers that offers full compatibility for high performance G.Skill memory of 3000MHz and above. EVGA was able to fine tune the memory performance, XMP support and compatibility to offer enthusiasts full support for the fastest DDR4 memory available today.

Extreme overclocker Vince "K|NPG|N" Lucido, who continues to achieve 3DMark World Records using EVGA components, had this to say about EVGA X99 motherboard support for G.Skill's 3000MHz+ memory. "The EVGA motherboard and BIOS R&D teams wanted to prove they could make a motherboard that can flawlessly run the fastest memory available on the market today, and they did exactly that."

Congratulations to the Russian legendary overclockers, Slamms and Smoke, from team "OCLAB.RU" on breaking the new SuperPI 32M world record. With incredible memory speed of DDR3 2,640MHz CL8, team OCLab.ru has achieved the fastest SuperPI 32M score of 4m 44.609s. This incredible record has been validated by the world's most well-known overclocking community website,hwbot.org, and can be found here.

Keeping up with the competition, G.Skill Memory is also making debut with a full line of DDR3 performance memory products designed for the Intel Core i7 processors and the Intel X58 Express chipset. Included are a total of four G.SKILL 3GB and 6GB triple memory kits with DDR3 1333MHz and 1600MHz frequencies for enthusiasts, overclockers, and early-adopters:

• F3-10666CL9T-3GBNQ: 3GB (1GB x 3) DDR3-1333 (PC3 10666), CL9-9-9-24 @ 1.5-1.6V
• F3-10666CL9T-6GBNQ: 6GB (2GB x 3) DDR3-1333 (PC3 10666), CL9-9-9-24 @ 1.5-1.6V
• F3-12800CL9T-3GBNQ: 3GB (1GB x 3) DDR3-1600 (PC3 12800), CL9-9-9-24 @ 1.5-1.6V
• F3-12800CL9T-6GBNQ: 6GB (2GB x 3) DDR3-1600 (PC3 12800), CL9-9-9-24 @ 1.5-1.6V

All kits are backed by G.Skill's lifetime warranty.

Double-data-rate two synchronous dynamic random access memory or as we also know it as DDR2 RAM is still very widespread today, and memory manufacturer G.Skill is looking to keep demand up by introducing a new set of DDR2 PI-8800 kits available in 4GB or 8GB of capacity. The G.Skill PI memory series are especially designed to provide stable and long-term performance for overclockers and computer enthusiasts. Sold in different capacities: F2-8800CL5D-4GBPI (2x2GB) and F2-8800CL5Q-8GBPI (4x2GB) both these kits operate at 1100MHz with CL5-5-5-15 latencies and 1.8-1.9V. Additionally G.Skill sells them with a lifetime warranty. For more information, please visit this page.

As Solid State Drives (SSDs) are gaining speed quickly, memory manufacturer G.Skill today decided to join in with two SSD drives (model: FS-25S2-32GB). Available in 32GB and 64GB capacity, the G.Skill 2.5-inch SATAII drives are robust substitutes for normal hard drives (HDDs). G.Skill's SSDs are more reliable, plus they deliver 100MB/s read and 80MB/s write speeds for most 2.5-inch SATAII capable devices. Please visit G.Skill's official site for more information.

G.Skill International Enterprise, a leading provider of high performance memory, is launching a new heat spreader design for mid-high end memory. Based on providing better heat dissipation, G.Skill "π" series heat spreader design increases the air contact surface 100% more than traditional design. Under high voltage, G.Skill claims that "π" can lower the module temperature at least 20% to 30% more than other memory cooling systems. G.Skill's "π" series heat spreader will be implemented with a whole new "HZ" series of dual-channel kits ranging from DDR2-800 to DDR3-1600. These modules will be available through G.Skill's authorized resellers and distributors worldwide.

G.Skill International Enterprise, a worldwide leader in extreme performance and reliability memory announced today the new DDR3-1800 CL7. The DDR3-1800 CL7 is for enthusiasts upgrading to the next generation platforms. The DDR3-1800 HZ Series is available in 2GB dual channel kits to meet the specific needs of gaming systems or high performance workstations.

G.Skill International Enterprise today unveiled new 4GB (2x2GB) DDR2-1066 CL5-5-5-15 memory kit (part namber: F2-8500CL5D-4GBPK). G.Skill F2-8500CL5D-4GBPK uses 8 Layers PCB which can avoid electronic noise from power line and ground. It also can provide more stable impedance and lower signal distortion. These modules will be available through G.Skill's authorized resellers and distributors worldwide.

G.Skill International Enterprise recently launched the new package and full product line for Apple Mac users. The products include:

• 1GB SO-DIMM DDR2-667 (PC2-5300)
• 2GB SO-DIMM DDR2-667 (PC2-5300) (one 2GB memory or 2x1GB kit)
• 3GB SO-DIMM DDR2-667 (PC2-5300) (one 1GB and one 2GB)
• 4GB SO-DIMM DDR2-667 (PC2-5300) (2x2GB kit)

All memories and kits are backed with a lifetime warranty, and should work just fine using CL5-5-5-15 timings. These modules will be available through G.Skill's authorized resellers and distributors worldwide. For more information and specifications of the new Apple series products, please visit G.Skill.

G.Skill International Enterprise, the professional provider in high performance memory module, today unveiled 4GB DDR2-800 CL4 set - F2-6400CL4D-4GBPK.

Low latency is the great factor that affects the memory performance. Nowadays, the CPU is much faster than memory. The CPU has to wait for a relatively long time for a memory access to complete before it can process the data. Low latency memory can break the system performance bottleneck.

Memory manufacturer G.Skill has recently introduced a new pair of DDR2 memories - the F2-8000CL5D-4GBPQ. The new DDR2-1000 (PC2-8000) 2x2GB kit is rated to work at CL5-5-5-15 timings @ 2.1V. The new modules come with a lifetime warranty and will be available through G.Skill's authorized resellers and distributors worldwide. For more information and specifications of the new PQ series products, please click here.

Taiwan-based memory manufacturer G.Skill announced today right after Super Talent its new DDR3-1600 CL7-7-7-18 (F3-12800CL7D-2GBHZ) memory modules. The new high-end G.Skill memory guarantees clock speed of 1600MHz (PC3-12800) and timings of CL7-7-7-18. The new F3-12800CL7D-2GBHZ kit is available now in matched pair of 2x 1GB modules. G.Skill also offers lifetime warranty with these modules. For more information and specifications of the new PK series products, please go here.

G.Skill International Enterprise launches the world 1st DDR2-800 CL4-4-3-5 high performance series memory modules - F2-6400CL4D-2GBHK. Both single module and matched pair packages will be available through G.Skill's authorized resellers and distributors worldwide. All G.Skill memory modules come with lifetime warranty. For more information and specifications of the new PK series products, please visit this page.