It appears as though Nintendo has once again deliberately attempted to lock out third-party accessory makers from making docks for the Nintendo Switch 2. According to testing conducted by The Verge, the Nintendo Switch 2 uses proprietary, encrypted signals to effectively authorize a dock before video or power is sent over the USB-C connection. This behavior was confirmed by a USB power bank tester, which monitors the USB connection packets and can output the signals on another device for inspection. The Switch 2 also demands a higher voltage from its dock, requesting as much as 20 V, instead of the usual 15 V, although it does not appear to use the full 20 V for functionality, instead it uses it as a sort of check before dropping back down to 15 V.

In the case of the Switch 2, there was one particular third-party dock that was compatible with the new console, and upon inspecting that USB connection with the power bank tester, The Verge found that there were 30 "unstructured" packets being sent back and forth before the Switch 2 even attempted to send a video signal or negotiate power with the accessory. There was one particular string that was sent between the Switch 2 and the dock that appears to be an encryption key of sorts. If the dock fails either the voltage test or the aforementioned proprietary communications, the console defaults to a USB-only mode with no video or power delivery support. According to two accessory makers who spoke to The Verge, the Switch 2 also uses a dedicated encryption chip to lock out third-party docks and unlicensed accessories. At the time of writing, the only dock that is compatible with the Switch 2 is the Antank S3 Max, although even Antank's representative says that this can't be taken for granted, since Nintendo can, and likely will, change this authentication method with a firmware update if enough third-party dock makers catch on. So far, these changes to the USB protocol on the Switch 2 have already resulted in JSAUX putting its plans for a Switch 2 dock on hold, despite its prominence in the Steam Deck dock market.

Gaming manufacturer JSAUX announces the release of its latest accessory for Nintendo fans: the Cooling Fan, designed specifically for the Nintendo Switch 2. This accessory offers powerful cooling, a secure clip-on design, and low-noise performance—perfect for marathon gaming sessions without thermal throttling. The Cooling Fan for Nintendo Switch 2 will be 25% off on Amazon Prime Day (July 8-11), and 10% off afterward.

With the Nintendo Switch 2 pushing higher performance limits—and temperatures rising up to 40°C—effective thermal management has become essential. JSAUX's Cooling Fan can reduce the device temperature by 2-8°C in just 4-8 minutes, providing outstanding cooling performance with stepless knob-based speed control. Its lightweight design ensures comfortable use in handheld mode. The fan features a secure clip-on design that firmly attaches to the back of the Switch 2, optimizing heat dissipation without compromising portability or usability.

Tech manufacturer JSAUX announces it will attend CES Las Vegas for the very first time during January 7-10. JSAUX's booth will be located at the LVCC - South Hall 1, booth no. 32344 and it will showcase a line up of new and exciting products from different categories: the FlipGo Horizon, a new entry in its family of portable monitors, and its accessories for iPhone.

Founded in 2016, JSAUX has established itself as a leading name in the gaming accessory market, with products recognized across 100+ countries. The brand's success stems from four key factors:

Technology manufacturer JSAUX announces that, following the success of their FlipGo Pro, winner of the 2024 iF Design Award and Red Dot Design Award, the company has launched a new version, the JSAUX FlipGo Portable Monitor Lite 15.6". This first product in the FlipGo Lite Series sports a market standard size of 15.6" (as compared to the FlipGo Pro models of 13.5 and 16" sizes). The FlipGo Lite will be available on JSAUX's website on early July for $299.

The dual-stacked portable monitor raised more than $1,000,000 in a Kickstarter campaign last February. The FlipGo is a portable monitor for a brave new world, where productivity and efficiency are paramount for digital nomads and remote workers. The new entry in the category, the FlipGo Lite, measures 15.6" and it's especially suitable for Windows computers. Thanks to its UltraView mode, which allows the dual-screen to function as a single monitor, users can grab their hands on a portable monitor that equals a 21" screen.

Tech manufacturer JSAUX announces a new product in its line of handheld accessories. After having released successful new items such as the transparent backplate or the ModCase, the company reveals today a blend of docking station and stand, codenamed HB0609, that is compatible with the future ROG Ally X plus other handheld devices such as the ROG Ally, the Steam Deck or the Legion Go. This two-in-one design helps keep the console in a vertical position while offering a multifunctional six-in-one interface and is available for $45.99.

Unleash the full potential of your handheld device, (Steam Deck, ROG Ally, ROG Ally X or Legion Go) with a multifunctional docking station that also works as a console stand. Display your handheld either at your living or your gaming room while taking advantage of its connectivity. The docking station and stand feature the following ports:

The electronics brand JSAUX has a New Year's treat for Steam Deck, ROG Ally and Legion Go users. The transparent RGB dock adds a black transparent case to the popular RGB docking station: now you can match your transparent handheld device with a dock that not only shows its inner workings but that also lights your living room. The 8-in-1 transparent RGB docking station is available for $69.99 (discounted to $49 during its release) while the 12-in-1 transparent RGB docking station is available for $99.99 (discounted to $70 during its release)

About the RGB docking station
This new transparent RGB docking station is not only adding a black transparent casing to the former product. JSAUX has upgraded the product to better show its internal structure as well as the RGB lighting effects. A new chip now supports Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM) functionalities, two new features that will improve the user experience.

Electronics brand JSAUX is celebrating its seventh anniversary during July and it has announced a new batch of Steam Deck accessories: the RGB Docking Station and the RGB transparent backplate are now available, following the release of the transparent front plate and the redesigned transparent backplate. JSAUX is also planning to release an anti-glare screen for Steam Deck later this month. More info about each product below:

The RGB docking station is the latest feature on JSAUX's family of docks for the Steam Deck. This new product features better compatibility, a total customization of the RGB lighting, and comes in two versions: 12-in-1 and 8-in-1, offering different connectivity options.

After our long acclaimed transparent back cases, we couldn't resist and we released the transparent front case plus a new transparent back plate with new ventilation and cooling features. Now you can fully customize your Steam Deck and embrace the retro-gaming style. But that's not all, along with the Transparent Front Plate a new version of our Transparent Back Plates will all be on sale too, starting today!

THE LONG AWAITED TRANSPARENT FRONT PLATE
This highly anticipated front cover will be released in three colors (crystal, brown, and purple) finally allowing you to own a fully transparent Steam Deck. This item will come with a full complimentary tool kit and an installation guide. Before exposing the guts of your Steam Deck, keep in mind that the installation process (around 3 to 5 hours long) is trickier than the one for the back cover and that you should consider seeking help from a professional - or proceed by yourself at your own discretion. Get your Transparent Front Plate here.