KLEVV today announced the CRAS C925 line of mid-range M.2 NVMe SSDs. Built in the M.2-2280 form-factor, these drives take advantage of the PCI-Express 4.0 x4 host interface, to provide sequential transfer speeds of up to 7400 MB/s reads, and up to 6500 MB/s sequential writes, depending on the model. There are three of these based on capacity—500 GB, 1 TB, and 2 TB. All three offer up to 7400 MB/s sequential reads, while the maximum write speeds are up to 6200 MB/s for the 500 GB model, up to 6300 MB/s for the 1 TB model, and up to 6500 MB/s for the 2 TB model. Both the 500 GB and 1 TB models offer up to 670,000 IOPS 4K random reads, and up to 980,000 IOPS random writes; while the 2 TB model does up to 700,000 IOPS random reads, with up to 1 million IOPS random writes.

The KLEVV CRAS C925 combines a MaxioTech MAP1602 DRAMless controller with an unspecified brand of 3D TLC NAND flash memory. The drive features a single-sided design, in that even the top 2 TB model has all its components on one side of the PCB. You can use the included aluminium heat-spreader that reduces temperatures by 12%, or the heatsink your motherboard includes. KLEVV rates the write endurance of these drives at 600 TBW for the 500 GB model, 1,200 TBW for the 1 TB model, and 2,400 TBW for the 2 TB model. The company is backing the drives with a 5-year warranty. The company didn't reveal pricing, but mentioned that the drives will be available from May 2024.

KLEVV, the premier consumer memory and storage brand introduced by Essencore, today is excited to unveil the all-new CRAS V RGB Brilliant White edition memory kit available in extreme high speed of DDR5-8200 & DDR5-8400 configurations. As a testament to the immense popularity and growing demand for the CRAS V RGB memory kits, KLEVV has responded by introducing the long-awaited Brilliant White edition to its flagship memory lineup as well as two high-speed options for consumers. This new addition boasts striking aesthetics by keeping the tone-on-tone design, and upholds the exceptional performance standards synonymous with the CRAS V RGB series, solidifying its position as the preferred choice among enthusiasts and professionals alike.

Meticulously engineered for high-speed operation, KLEVV's CRAS V RGB memory kits deliver outstanding performance with remarkable speed options of DDR5-8200 (featuring timings of 38-49-49-131) and DDR5-8400 (with timings of 40-52-52-134), all while operating efficiently at a voltage of 1.45 V. Below screenshot demonstrates the test result of DDR5-8400 kit using AIDA64 Cache & Memory Benchmark tool.

KLEVV, an emerging memory brand introduced by Essencore, is excited to unveil brand new additions to its high-capacity non-binary DDR5 overclocking memory range, meticulously designed to meet the demanding needs of gamers, content creators, and PC enthusiasts across the globe. KLEVV's DDR5 memory lineup now boasts novel non-binary and high-capacity combinations aimed at bringing users a diverse, cutting-edge product range.

Globally popular CRAS V RGB, CRAS XR5 RGB, and BOLT V DDR5 gaming/overclocking memory are now available in non-binary 48 GB (24 GB x2) and high-capacity 64 GB (32 GB x2) kits, ensuring enhanced performance and multitasking capabilities. Ideal for modern-day computing needs, these new units are suitable for PC workstations and gaming rigs that settle for nothing but the very best. KLEVV's CRAS V RGB and CRAS XR5 RGB DDR5 gaming/overclocking memory offer up to 8000MT/s clock speed, perfect for content creators seeking to harness the unparalleled performance of the latest DDR5 technology.

KLEVV, an emerging memory brand introduced by Essencore today, is excited to unveil its latest M.2 Solid State Drive, the CRAS C910 Lite, packed with advanced specs for unparalleled performance. As a new addition to KLEVV's M.2 SSD lineup, the all-new CRAS C910 Lite utilizes PCI Express Gen 4 x4 interface supported by NVMe 1.4, ensuring lightning-fast data transfer rates excellent for competitive gaming and content creation.

Available in multiple storage capacities, including 500 GB, 1 TB, 2 TB, and 4 TB, the CRAS C910 Lite features strictly-selected 3D NAND Flash components, enabling impressive sequential read/write speeds of up to 5000/4200 MB/s and 4K Random Read/Write IOPS of up to 680,000/880,000.
A feather-light weight of a mere 7gram thanks to its revolutionary ultra-thin, single-sided SSD architecture based on the M.2 2280, the CRAS C910 Lite redefines compact performance, making it a perfect fit for a wide array of devices from nimble mini-PCs to sleek laptops.

Essencore KLEVV brought in a formidable lineup of new PCIe Gen 5 NVMe SSDs and DDR5 memory for gamers and overclockers, at the 2023 Computex. The lineup is led by the KLEVV CRAS V RGB series of DDR5 memory that comes in high-end speeds of DDR5-6000 (30-36-36-76 @ 1.35 V), DDR5-6400 (32-38-38-78 @ 1.35 V), DDR5-7200 (34-44-44-84 @ 1.40 V), DDR5-7600 (36-46-46-86 @ 1.40 V), and DDR5-8000 (38-48-48-128 @ 1.55 V). These modules feature both Intel XMP 3.0 and AMD EXPO SPD profiles. The KLEVV BOLT V series form the company's mid-range, offering speeds of DDR5-6000 (30-36-36-76 @ 1.35 V), DDR5-6400 (32-38-38-78 @ 1.35 V), and DDR5-6800 (34-40-40-80 @ 1.35 V). Both XMP 3.0 and EXPO are to be found even with these modules. The company interestingly also has standard modules for DDR5-4800 and DDR5-5600, which make do with just 1.1 V. We also spied KLEVV's odd-capacity 24 GB and 48 GB CRAS V RGB modules.

The storage lineup for Essencore is led by the KLEVV CRAS C950 PCIe Gen 5 NVMe SSD, and the CRAS C910 Gen 4 SSD. The CRAS C950 comes in 1 TB, 2 TB, and 4 TB capacities, and uses a Phison E26-series controller paired with 3D TLC NAND flash. The 1 TB variant offers up to 11.5 GB/s sequential reads, with up to 8.5 GB/s sequential writes, while the 2 TB and 4 TB models do up to 12 GB/s sequential reads, with up to 11 GB/s sequential writes. The drive uses a chunky passive aluminium heatsink to keep cool. The CRAS C910, on the other hand, comes both as a bare drive (without heatsink), and as the CRAS C910 RGB, where it features a heatsink with an RGB diffuser. The drive uses an InnoGrit IG5220 controller, comes in capacities of up to 1 TB, and offers speeds of up to 5 GB/s sequential reads, with up to 4.8 GB/s sequential writes.

KLEVV, an emerging memory brand introduced by Essencore, is excited to unveil two new high performance DDR5 overclocking memory, the CRAS V RGB and the BOLT V. Designed to cater to a wide range of users, the CRAS V RGB and BOLT V DDR5 memory empower all aspects of computational requirements. They deliver outstanding performance on the latest AMD and Intel platforms, from gaming to content creation, with Intel XMP 3.0 and AMD EXPO overclocking features. Furthermore, the CRAS V RGB and BOLT V DDR5 memory are fully battle-hardened, passing the QVL tests required by major motherboard manufacturers. With strictly selected memory chips and meticulous manufacturing processes, they ensure the highest level of reliability, tailored to perform multitasking operation effortlessly.

Released under KLEVV's flagship memory range, the CRAS V RGB memory features modern design refined with exquisite attention to detail. Precision crafted aluminium heatsink highlighted by signature RGB lights visible on both top and fine gaps on the sides make for a sight to behold. The RGB lights are fully customizable and controllable with third-party software provided by world-renown motherboard manufacturers like ASUS, ASROCK, Gigabyte, and MSI with corresponding hardware, serving as the centerpiece of any build. The 32 GB (16 GB x2) 288 Pin DDR5 unbuffered DIMM kits are available in four base clock options starting at 6000MT/s, 6400MT/s, 7200MT/s, 7600MT/s, and extending up to blazing-fast 8000 MT/s.

KLEVV, an emerging memory brand introduced by Essencore, is excited to announce three new consumer-grade M.2 NVMe SSDs, the CRAS C930, C910, and C730. The new CRAS M.2 NVMe SSD lineup aims to serve a wide range of users, enabling entry-level to top-tier enthusiasts with industry-leading storage technology. Both CRAS 930 and C910 come with an optional add-on heatsink for users to maximize their freedom in the setup.

With an impressive 1500 TBW endurance lifecycle and a significant emphasis on DRAM cache buffer, the CRAS C930 is built to withstand harsh workloads. Utilizing the latest PCIe Gen4 x4 interface supported by NVMe 1.4, it delivers break-neck sequential read/write speed of up to 7400/6800 MB/s at 2 TB max capacity and 4K random read/write up to 1000K IOPS. Exceptional engineering and design elements make the CRAS C930 the crown jewel of KLEVV's new M.2 NVMe SSD lineup, capable of running on PCs, Laptops, and even PS5 consoles. Additionally, the flat fin heatsink addon is a great inclusion with up to 20% temperature reduction, giving users complete flexibility in their choice.

KLEVV, an emerging memory brand introduced by Essencore, is thrilled to unveil its latest extreme performance DDR5 overclocking/gaming memory, the CRAS XR5 RGB DDR5 memory kit. Tailor-made to synergize well with the latest 12th Gen Intel Core desktop processors and Intel Z690 chipset motherboards, the CRAS XR5 RGB DDR5 memory brings leading-edge DDR5 technology with jaw-dropping performance like never before.

Pushing the envelope of technology while focusing on craftsmanship, KLEVV showcases superior product design language and engineering prowess with the new flagship CRAS XR5 RGB DDR5 memory, designed to empower overclockers, PC enthusiasts, gamers, and professional content creators with mind blowing performance.

ESSENCORE today unveiled the KLEVV CRAS C920 and KLEVV CRAS C720 SSDs in the M.2-2280 form-factor. The CRAS C920 takes advantage of the PCI-Express 4.0 x4 host interface, and uses the Phison E18-series controller, paired with 3D TLC NAND flash memory. It comes in capacities of 1 TB and 2 TB. Both variants offer sequential reads of up to 7,000 MB/s, differing in write speeds—up to 6,850 MB/s for the 2 TB variant, and up to 5,500 MB/s for the 1 TB variant.

The KLEVV CRAS C720 meanwhile, is a slightly value ended product. It combines the latest revision of Phison E12S controller with 3D TLC NAND flash, and takes advantage of the PCI-Express 3.0 x4 host interface. This drive comes in capacities of 256 GB, 512 GB, 1 TB, and 2 TB. Barring the 256 GB variant that offers sequential speeds of up to 3,200 MB/s with up to 1,300 MB/s writes; all the other variants offer up to 3,400 MB/s sequential reads; writing at up to 2,400 MB/s, 3,100 MB/s, and 3,100 MB/s, respectively. Endurance of these drives are rated at 170 TBW, 280 TBW, 565 TBW, and 1,550 TBW, respectively. The company didn't reveal pricing.Update Jun 16th: The press-release follows.

Klevv, a subsidiary of SK Group, today announced two new DDR4 memory product lines - one with RGB flavoring, the other without. The Cras XR RGB features a metal heatspreader with a dotted pattern (42.5 mm height), topped by an RGB LED bar compatible with multiple RGB control software in the market (think ASUS Aura Sync, MSI Mystic Light Sync, and Razer Chroma RGB, among others). The Cras XR RGB is available in kits ranging from 8 GB single-stick through to 32 GB (2 x 16 GB) kits in multiple memory speeds; 3600 MHz with 18-22-22-42 timings @ 1.35 V (up to 2x 16 GB); 4000 MHz with 19-25-25-45 timings @ 1.40 V (up to 2x 8 GB) and 4200 MHz with 19-26-26-46 timings @ 1.40 V (up to 2x 8 GB).

The Bolt XR forgoes the RGB lighting and uses a textured metal heatspreader with black branding (36.7 mm height). The Bolt XR isn't available at the top 4200 MHz speed, though; it seems top performance is reserved for RGB enthusiasts. The only available speeds are 3600 MHz with 18-22-22-42 timings @ 1.35 V (up to 2x 16 GB) and 4000 MHz with 19-25-25-45 timings @ 1.40 V (up to 2x 8 GB). No word on pricing or availability was known at time of writing, though Klevv does offer a limited lifetime warranty for these modules.

KLEVV today introduced the CRAS C710 line of mainstream M.2 NVMe SSDs, in 256 GB, 512 GB, and 1 TB capacities. Built in the M.2-2280 form-factor with PCI-Express 3.0 x4 host interface, the drives combine a Silicon Motion SM2263XT DRAMless controller with 3D TLC NAND flash memory, offering intelligent SLC caching. Performance figures put out by the company read as up to 2,100 MB/s sequential reads, up to 1,650 MB/s sequential writes for the 1 TB variant. The 512 GB variant offers up to 2,050 MB/s reads, with up to 1,650 MB/s writes. The 256 GB model does up to 1,950 MB/s reads, with up to 1,250 MB/s writes. The company didn't reveal pricing information.

KLEVV at its Computex 2019 booth unveiled a new line of high-performance USB flash drives. It also brought along its latest variants of CRAS series M.2 NVMe SSDs and DDR4 memory, which come with a dazzling/blinding (take your pick) amount of RGB LED embellishment. We begin with the Portable Ghost, branded as a "portable SSD" and not a flash-drive. This is because the USB 3.1 gen 2 type-C connection pulls a PCIe/NVMe internal SSD. When plugged into a PC or a USB charger, the drive can also work as a wireless drive to your other devices over Bluetooth 4.2. The drive comes in two variants based on capacity, which significantly differ in hardware. The 240 GB variant is pulled by a JMicron JM5583 controller, while the 480 GB variant has a Silicon Motion SM2263EN. Both models use 72-layer 3D TLC NAND flash, and have the same on-paper performance figures, with up to 1,250 MB/s reads/writes. The drive isn't without two RGB LED diffusers.

The Blu RC30 is another fascinating, albeit slower drive, that's properly marketed as a flash drive. Built in the conventional 2-piece capped form-factor, the drive features a USB 3.1 gen 1 (5 Gbps) type-A connection. An internal battery which soaks up power when plugged in, lets the drive function wireless over Bluetooth 4.2, and also be used as a wireless presentation tool (a clicker), with capacitive touch surface and a couple of buttons, which imitate a mouse. Built in capacities of 32 GB, 64 GB, and 128 GB, the Blu RC30 offers sequential transfer-rates of up to 250 MB/s reads on all three models, and write-speeds rated at 40 MB/s for the 32 GB model, 50 MB/s for 64 GB, and 90 MB/s for the 128 GB model. Transfer rates are severely throttled in wireless mode. We then moved on to its SSD and memory products.

Klevv today announced the launch of the CRAS C700 RGB NVMe M.2 SSD, which dials RGB goodness up to at least 12. The new SSD makes use of the PCIe 3.0 4x interface through the NVMe 1.3 protocol, enabling up to read 1500MB/s read and 1300MB/s write speeds. Klevv have made this SSD available in 120 GB, 240 GB and 480 GB capacities. There's SLC caching on-board, which means performance will certainly be slower in more data-heavy operations, in the event that the SLC cache overflows. The RGB goodness is distributed through 8 individually-addressable LEDs behind a gem-like diffuser, which provides an even glow that's programmable through most motherboard RGB control software.

Klevv also announced that the CRAS C700 RGB NVMe M.2 SSD makes use of 10-layer PCB for "better data integrity", as well as a 27% reduction in operating temperatures for the SD due to KLEVV's heatsink design. An unannounced feature for the RGB power in these SSDs is the ability to illuminate even Game of Thrones' Season 8, Episode 3 from inside your PC case.

Boutique yet high-end memory maker KLEVV unveiled a plethora of RGB LED-lit variants of its popular memory modules. The star attractions at the company's Computex booth are the Cras II RGB and Cras X RGB. Both are studded with addressable RGB LEDs. The Cras X RGB features a soft diffuser along its top, besides a chunkier heatspreader, while the Cras II RGB has an intricately designed heatspreader, with cutouts through which the lighting is diffused. The Cras II RGB comes in DDR4-3200 speed, and in 2x 8 GB dual-channel kit, while the Cras X RGB comes in both DDR4-3200 and DDR4-3466 speeds, and 2x 8 GB and 2x 16 GB densities. The Bolt and Bolt X are the company's standard-height modules, with simpler heatspreader designs. The Bolt comes in DDR4-2400, and DDR4-3000 speeds, in 4 GB, 8 GB, and 16 GB densities, while the Bolt X, with a more premium design, ticks at DDR4-2666 and DDR4-3200, in the same densities.

Klevv announced its new entry-level DDR4 memory module, the Fit 4. The module features an identical heatspreader design to the original Fit (DDR3) series, and features a black full-height PCB. The Fit 4 series is likely to include various sub-3000 MHz DDR speeds, densities of 4 GB, 8 GB, and 16 GB; making up dual-channel kits of 8 GB, 16 GB, and 32 GB, respectively. These could also be among the most affordable DDR4 memory you can get from this brand.

Here's the first picture of an Urbane 610 SSD by Klevv, in the flesh. The performance-segment SSD is built in the 2.5-inch form-factor, with SATA 6 Gb/s interface, and serves up 560 MB/s of sequential reads, with up to 530 MB/s sequential writes (480 GB and 960 GB variants) or up to 360 MB/s writes (240 GB variant). It combines Toshiba 15 nm MLC NAND flash memory, with Phison PS3110-S10 controllers.

Essencore Limited, a noteworthy newcomer in DRAM modules and NAND Flash application products including Gaming Memory Modules, Solid State Drives, USB Flash Drives and MicroSD cards, is pleased to announce the sales kick-off in European countries with its brand "KLEVV". In attempt to expand its global presence and to accelerate growth, Essencore hopes that this KLEVV product launch will help to efficiently deliver its premium products to its European customer.

As a young company founded in 2014 by CEO IU Kim, Essencore strives to become world's leading vendor of both DRAM modules and NAND Flash application products. To achieve this goal, Essencore has introduced its house brand "KLEVV" with the industry's first-rate quality and best performing products. In a conscious move to strengthen brand awareness and products at this early stage, KLEVV will focus on the three key consumer markets of U.S., Europe and China. Of all regions, Europe is deemed to have the highest potential, with its huge population of tech enthusiasts. Starting in Germany, UK, and Poland in summer 2015, KLEVV products will soon be available in all corners of Europe.

Hong Kong-based KLEVV, which came out of nowhere in 2014 as a premium PC memory vendor, and established itself as a brand to look out for, launched its flagship DDR4 memory module for the year, the CRAS "Creative Evolution" series. This full-height unbuffered DDR4 module is characterized by a tall anodized aluminium heatsink with aluminium protrusions that add to its surface area of dissipation, and a brushed aluminium strip, with either red or white LED lighting.

KLEVV CRAS comes in module densities of 4 GB and 8 GB, in variants of DDR4-2133 (15-15-15 @1.2V), DDR4-2666 (XMP 2.0, 15-15-15 @1.2V); DDR4-2800 (XMP 2.0, 16-16-16 @1.2V), and DDR4-3000 (XMP 2.0, 16-18-18 @1.35V). It will be initially sold in quad-channel kits of 16 GB (4 x 4 GB), and 32 GB (4 x 8 GB); dual-channel kits of 8 GB (2 x 4 GB) and 16 GB (2 x 8 GB) will soon follow.