After the data center-oriented Hopper architecture launch, NVIDIA is slowly preparing to transition the consumer section to new, gaming-focused designs codenamed Ada Lovelace. For starters, the source claims that NVIDIA is using the upcoming GeForce RTX 3090 Ti GPU as a test run for the next-generation Ada Lovelace AD102 GPU. Thanks to the authorities over at Igor's Lab, we have some additional information about the upcoming lineup. We have a sneak peek of a few features regarding the top-end GeForce RTX 4080 and RTX 4090 GPU SKUs. According to Igor's claims, NVIDIA is testing the PCIe Gen5 power connector and wants to see how it fares with the biggest GA102 SKU - GeForce RTX 3090 Ti.

Additionally, we find that the AD102 GPU is supposed to be pin-compatible with GA102. This means that the number of pins located on GA102 is the same as what we are going to see on AD102. There are 12 places for memory modules on the AD102 reference design board, resulting in up to 24 GB of GDDR6X memory. As much as 24 voltage converters surround the GPU, NVIDIA will likely implement uP9512 SKU. It can drive eight phases, resulting in three voltage converters per phase, ensuring proper power delivery. The total board power (TBP) is likely rated at up to 600 Watts, meaning that the GPU, memory, and power delivery combined output 600 Watts of heat. Igor notes that board partners will bundle 12+4 (12VHPWR) to four 8-pin (PCIe old) converters to enable PSU compatibility.

TechPowerUp today released the latest version of TechPowerUp GPU-Z, the graphics sub-system information and diagnostic utility. Version 2.45 introduces support for a number of new GPUs. On the NVIDIA side, we have the GeForce RTX 3090 Ti, RTX 3060 Ti (GA103-based), RTX 3080 Ti Laptop GPU, T1000 8 GB, T400, CMP 170HX, and A16. On the AMD side, we have the Radeon RX 6950 XT, RX 6750 XT, RX 6800S, RX 6700S, RX 6850M XT, RX 6650M XT, W6400, "Barcelo" APU, "Rembrandt APU," and Valve Steam Deck GPU. Preliminary support is also added for Intel Arc "Alchemist" series. Memory size reporting of NVIDIA "Ampere" was improved. Also improved is support for Intel "Alder Lake" iGPUs, support for HBM and DDR4 memory on NVIDIA, and improved "GA106" transistor count.

DOWNLOAD: TechPowerUp GPU-Z 2.45

For those looking to invest in a GeForce RTX 3090 Ti card, but being unable to acquire a new power supplies with a 12VHPWR connector, there's good news today, as NVIDIA is said to be bundling a power adapter with the cards. The adapter does have its own requirements though, as it's a three to one type of adapter, which means your power supply still needs to have at least three 8-pin PCIe type power connectors. The adapter is said to be able to deliver 450 Watts of power to the upcoming graphics card, which is in line with the various leaks and rumours about the GeForce RTX 3090 Ti.

It's worth keeping in mind that these types of mechanical adapters won't allow the graphics card to communicate with the PSU, something that will be reserved for ATX 3.0 power supplies it seems. It'll also lead to some extra cable tangle near the graphics card, as the design of the pictured connector doesn't exactly look slick or space saving. Hopefully some power supply manufacturers will come up with a neater solution, until the transition to ATX 3.0 PSUs take place.

NVIDIA is finally coming around to launching its top-of-the-line GeForce RTX 3090 Ti "Ampere" graphics card on March 29, 2022, according to a source on the ChipHell community, cited by Wccftech. The same source also mentions that NVIDIA has dropped the idea of releasing a 16 GB variant of the performance-segment GeForce RTX 3070 Ti, which means the company is possibly wrapping up the its RTX 30-series "Ampere" product-stack updates going into Spring-Summer, so it could prepare for its next-generation RTX 40-series based on the "Ada Lovelace" graphics architecture, with mid-year announcements followed by product launches in the second half of 2022.

The latest episode in the saga of the cyberattacks on NVIDIA servers that unleashed the motherlode of confidential information, the group behind the hack made its second set of demands. The first one was for a ransom to prevent public-disclosure, which NVIDIA possibly didn't meet. The second one is a demand for making GeForce proprietary drivers open-source on all platforms. Failing this, the group plans to release its next chunk of the leak public.

This, the group claims, includes sensitive files related to the company's silicon design, including Verilog (.v) files, and VG files. They also claim to be in possession of files related to upcoming hardware, including the elusive RTX 3090 Ti, and upcoming revisions of existing silicon. The group sets until 4th March (Friday) to meet its demand.

NVIDIA's RTX 3090 Ti graphics card could very well be a Spartan from 343 Industries' Halo, in that it too is missing in action. Originally announced at CES 2022 for a January 27th release, the new halo product for the RTX 30-series family even had some of its specifications announced in a livestream. However, the due date has come and gone for more than half a month, and NVIDIA still hadn't said anything about the why and the how of it - or when should gamers hoping to snag the best NVIDIA graphics card of this generation ready their F5 keys (and bank accounts). Until now - in a statement to The Verge, NVIDIA spokesperson Jen Andersson said that "We don't currently have more info to share on the RTX 3090 Ti, but we'll be in touch when we do". Disappointed? So are we.

While the reasons surrounding the RTX 3090 Ti's delayed launch still aren't clear - and with NVIDIA's response, we're left wondering if they ever will be - there were some warning signs that not all the grass was green on the RTX 3090 Ti's launch. The consensus seems to be that NVIDIA found some last-minute production issues with the RTX 3090 Ti, which prompted an emergency delay on the cards' launch. The purported problems range from issues with the card's PCB, BIOS, and even GDDR6X 21 Gbps memory modules - but it's unclear which of these (or perhaps which combination) truly prompted the very real delay on the product launch.

NVIDIA Senior Vice President Jeff Fisher teased the companies upcoming flagship RTX 3090 Ti during their CES 2022 presentation with the promise of further information about the card to be revealed later in January. This deadline has now passed and NVIDIA has yet to announce any more details about the card including pricing or availability despite the previously reported January 27th launch date. VideoCardz reports that media outlets haven't received any samples with deliveries unexpectedly put on hold which could be related to the recent hardware/BIOS issues that prompted NVIDIA to request that all board partners halt production of custom models. The RTX 3090 Ti is based on the GA102 GPU with 10,752 CUDA cores paired with 24 GB of GDDR6X 21 Gbps memory providing a bandwidth of 1 TB/s.

NVIDIA's RTX 3090 Ti is hot on the presses, and while actual product availability is anyone's guess, the card has already been made available for order (in extremely limited quantities, as one might expect). That said, the lack of a clear pricing messaging from NVIDIA seems to have left the door open for truly egregious pricing practices, which are likely added to at every step of the supply chain from the green team's AIB (add-in-board) partners and their custom RTX 3090 Ti graphics cards. Case in point: European, Swiss retailer Top Preise has started listing the latest NVIDIA halo card at a cool, not at all jaw-dropping average of €3,600 ($4,000). This is easily the highest-ever-pricing practiced on a consumer-level graphics card, so if anything, 2022 seems to have at least brought us that particular record-setting. Of course, pricing of a single retailer doesn't prove a pricing trend; but the fact that the cards are priced at untidy values does seem to indicate these aren't placeholder values.

This is much the case as has happened with NVIDIA's recent launch of the RTX 3080 12 GB - that card too didn't receive public MSRP guidance from NVIDIA, leaving its board partners - and retailers - to carve whatever pricing philosophy they deem adequate, considering the current state of the market, expected demand for NVIDIA's latest and greatest, and, of course, additional profits. Considering how the RTX 3080 12 GB has been found in store shelves for around $1,700 (remember the original MSRP for the RTX 3080 8 GB was set at $699), an upgrade to the RTX 3090 Ti would be a very expensive, $2,300 proposition for a relatively small performance improvement.

NVIDIA GeForce RTX 3090 Ti is real, and coming to gamers miners within Q1 2022. The new SKU maxes out NVIDIA's largest silicon based on the GeForce "Ampere" graphics architecture, the GA102, and pairs it with even faster 21 Gbps GDDR6X memory; but these changes come at a significant impact on power, with the typical board power for a stock RTX 3090 Ti reportedly being rated at 450 W, compared to the 350 W value of the RTX 3090. For enthusiast-class custom-design boards such as the EVGA KINGPIN, this only means even more elaborate setups, as QuasarZone forums found out.

While the current RTX 3090 KINGPIN comes with three 8-pin PCIe power connectors, a configuration capable of delivering up to 525 W (including the PCIe slot), the new RTX 3090 Ti KINGPIN ropes in the small but mighty 12-pin Molex MicroFit 3.0 connector, and comes with not one, but two of them! NVIDIA debuted the 12-pin connector in the consumer space with its RTX 30-series Founders Edition graphics cards. The connector is capable of delivering 450 W of power. With two of these on the RTX 3090 Ti, you're looking at a maximum power input capability of 975 W! It's only now, that PSUs are shipping with 12-pin cables, and even the high-Wattage ones we've come across, only pack one such connector. The EVGA card could hence include several dual- or triple-8-pin to 12-pin adapter cables. Pictured below is the RTX 3090 KINGPIN.

In the past few months, we have heard rumors of NVIDIA launching an upgraded version of the GA102 silicon called GeForce RTX 3090 Ti. The upgraded version is supposed to max out the chip and bring additional performance to the table. According to anonymous sources of VideoCardz, MSI, one of NVIDIA's add-in board (AIB) partners, is preparing to update its SUPRIM X lineup of graphics cards with the MSI GeForce RTX 3090 Ti SUPRIM X GPU, scheduled for January 27th launch date. This suggests that the official NDA lifts for these RTX 3090 Ti GPUs on January 27th, meaning that we could see AIBs teasing their models very soon.

As a general reminder, the GeForce RTX 3090 Ti graphics card should use a GA102-350 silicon SKU with 84 SMs, 10752 CUDA cores, 336 TMUs, 24 GB of GDDR6X memory running on a 384-bit bus at 21 Gbps speed with 1008 GB/s bandwidth, and a TBP of a whopping 450 Watts. If these specifications remain valid, the GPU could become the top contender in the market, however, with a massive drawback of pulling nearly half a KiloWatt of power.

It looks like GeForce RTX 3090 Ti is indeed the name of the maxed out "Ampere" GA102 silicon, and NVIDIA did not go with "RTX 3090 SUPER" for its naming. A picture emerged of an ASUS TUF Gaming GeForce RTX 3090 Ti graphics card that confirms the naming. The board design of the card looks similar to the RTX 3090 TUF Gaming, except that the Axial-Tech fans have changed, with more blades on the impellers.

The GeForce RTX 3090 Ti is expected to max out the GA102 silicon, featuring all 10,752 CUDA cores, 84 RT cores, and 336 Tensor cores, physically present on the silicon. The memory size is unchanged over the RTX 3090, with 24 GB of GDDR6X memory. What's new is that NVIDIA is reportedly using faster 21 Gbps-rated memory chips, compared to 19.5 Gbps on the RTX 3090. The typical board power is rated at 450 W, compared to 350 W on the RTX 3090. NVIDIA is expected to announce this card at its January 4 press event along the sidelines of the 2022 International CES.

NVIDIA has reportedly pushed midlife refreshes to its GeForce RTX 30-series "Ampere" graphics card family to beyond January, according to a report by Igor's Lab. The company was supposed to launch as many as three high-end graphics card SKUs in early-Q1, which include a 16 GB variant of the RTX 3070 Ti, which maxes out the GA104 silicon, a refreshed RTX 3080 12 GB variant, which keeps the CUDA core count of the original RTX 3080, but maxes out the 384-bit memory bus width of the GA102; and the RTX 3090 Ti, which maxes out both memory and CUDA cores on the GA102.

It's being reported that while the RTX 3090 Ti launch is on schedule, with announcements slated for NVIDIA's 2022 International CES presentation; the RTX 3070 Ti 16 GB and RTX 3080 12 GB could be launched only after the Chinese New Year (at least mid-February). The three SKUs, we predict, are designed to calibrate NVIDIA's lineup against a possible refresh of AMD's RDNA2 graphics architecture on the TSMC N6 (6 nm) node, which could allow the company to dial up engine clocks across the board, along with faster 18 Gbps GDDR6 memory, to better compete against the RTX 30-series. AMD is expected to announce these 6 nm GPUs in its CES presentation.

NVIDIA's upcoming flagship graphics card, the GeForce RTX 3090 Ti (also known as RTX 3090 SUPER in some rumor circles); could feature the company's fastest memory solution for GeForce, according to a Uniko's Hardware report. The card maxes out not just the 384-bit bus width of the "GA102" silicon, but also uses Micron-sourced "MT61K512M32KPA-21U" GDDR6X memory chips, which are rated for 21 Gbps date-rates. This results in a roughly 7.7% increase in memory bandwidth over the RTX 3090, with a whopping 1008 GB/s on tap. The title of the highest memory bandwidth on a client-segment graphics card would still go to the Radeon VII, which uses 4096-bit HBM2 to achieve 1024 GB/s. The RTX 3090 Ti also maxes out the "GA102" silicon, by enabling all 84 streaming multiprocessors (SM).

NVIDIA's GeForce RTX 30-series "Ampere" graphics card family is on course to a refresh, with at least four new Ti SKUs reportedly planned. These include the RTX 3050 TI, RTX 3070 Ti, RTX 3080 Ti, and the RTX 3090 Ti. From these, possible availability dates of the RTX 3070 Ti and RTX 3080 Ti surfaced in a Wccftech report. The RTX 3080 Ti is expected to be available on June 3, 2021, with reviews going live on June 2. The RTX 3070 Ti, on the other hand, is expected to be available a week later, on June 10, with reviews going live on June 9. There's no word on availability of the other rumored Ti SKUs, such as the RTX 3050 Ti (desktop) or the RTX 3090 Ti. The RTX 3070 Ti is being designed to better compete against the Radeon RX 6800 under the $600-mark, while the RTX 3080 Ti is designed to check the Radeon RX 6900 XT.

ZOTAC may have inadvertently leaked the GeForce RTX 3090 Ti. The latest version of its FireStorm utility mentions support for the RTX 3090 Ti. This would indicate that NVIDIA has been working on a new top-of-the-line graphics card that replaces the RTX 3090 as its most premium consumer graphics offering. Until now, it was expected that NVIDIA would hold onto the RTX 3090 as its top client product, with the gap between it and the RTX 3080 being filled up by the RTX 3080 Ti, to help it better compete with the AMD Radeon RX 6900 XT. AMD's introduction of the new RX 6900 XT (XTXH silicon), and more surprisingly, the introduction yielding a 10% clock-speed increase, has changed the competitive outlook of the very top of NVIDIA's product-stack.

There are no specifications out there, but in all likelihood, the GeForce RTX 3090 Ti maxes out the 8 nm "GA102" silicon. The RTX 3090 enables all but one of the 42 TPCs physically present on the silicon, and it's likely that this disabled TPC, amounting to an additional 256 CUDA cores, could be unlocked. This would put its CUDA core count at 10,752, compared to 10.496 on the RTX 3090. The only other area NVIDIA could squeeze out performance is GPU clock speeds—an approach similar to AMD's to come up with the RX 6900 XT (XTXH). The highest bins of GA102 could go into building the RTX 3090 Ti. The RTX 3090 already maxes out the 384-bit GDDR6X memory interface, uses the fastest 19.5 Gbps memory chips available, and offers a massive 24 GB of video memory, so it remains to be seen what other specs NVIDIA could tinker with to create the RTX 3090 Ti.

Pictures of alleged next-generation GeForce "Ampere" graphics cards emerged over the weekend, which many of our readers found hard to believe. It's features a dual-fan cooling solution, in which one of the two fans is on the reverse side of the card, blowing air outward from the cooling solution, while the PCB extends two-thirds the length of the card. Since then, there have been several fan-made 3D renders of the card. NVIDIA is not happy with the leak, and started an investigation into two of its contractors responsible for manufacturing Founders Edition (reference design) GeForce graphics cards, Foxconn and BYD (Build Your Dreams), according to a report by Igor's Lab.

According to the report, the cooling solution, which looks a lot more overengineered than the company's RTX 20-series Founders Edition cooler, costs a hefty USD $150, or roughly the price of a 280 mm AIO CLC. It wouldn't surprise us if Asetek's RadCard costs less. The cooler consists of several interconnected heatsink elements with the PCB in the middle. Igor's Lab reports that the card is estimated to be 21.9 cm in length. Given its cost, NVIDIA is reserving this cooler for only the top three SKUs in the lineup, the TITAN RTX successor, the RTX 2080 Ti successor, and the RTX 2080/SUPER successor.