News Posts matching #mVolt

Return to Keyword Browsing

New Tools Let Users Edit and Load Modified VBIOS on GeForce RTX GPUs Without Flashing

A developer who goes by Panchovix has released three tools that let NVIDIA GeForce RTX 50, RTX 40, and RTX 30-series owners run a modified VBIOS without writing anything to the card's flash chip. The first is a VBIOS editor for Windows and Linux that can change power limits, voltage ceilings, current (OCP) limits, fan channels, and the core and memory offset ranges. Edited images keep NVIDIA's original signature, which no longer matches, so they can't be flashed with nvflash. Patched tools did break NVIDIA's BIOS signature lock for crossflashing back in 2023, but this approach skips flashing altogether. On Windows, the loader stores the edited image in the GPU's driver registry key, where the driver picks it up as an override every time the device starts, and it only needs a quick GPU restart. The Linux loader instead patches NVIDIA's open kernel modules so the GSP firmware starts with the custom image, with Fedora 43 being the only distro tested on real hardware so far.

The screenshots show how this works in practice. On what appears to be an RTX 5090 Founders Edition ROM, the board power ceiling went from 600 W to 700 W and the NVVDD and MSVDD voltage ceilings from 1,110 mV to 1,150 mV. An RTX 4090 ROM had its power ceiling raised from 666 W to 750 W and its core offset range doubled to +2,000 MHz, and nvidia-smi later confirmed that card's power limit going from 550 W to 671 W. Apparently, an RTX 5090 reached 800 W, an RTX 5080 went from 360 W to 500 W, and an RTX 5060 Ti from 185 W to 300 W in the developer's own testing. Laptop RTX 40 GPUs can't be edited yet, and memory timings can't be changed since the card reads them directly from the flash chip.

NVIDIA Shuts Down RTX 5000 Power Limit Control OC in Latest Driver Update

We recently reported on the open-source overclocking tool, mVolt+, unlocking power limit control on NVIDIA GeForce RTX 5000-series GPUs, allowing certain GPUs, like the RTX 5090, to draw up to 125 W of additional power and enabling significantly higher core clock speeds as a result. With the latest driver update 616.56, however, it seems as though NVIDIA has blocked the core power control functionality.

Based on reports from the Overclock.net forums, via Uniko's Hardware on X, any attempt to input any extra current results in a black screen, reminiscent of a driver crash. Reportedly, a beta build of Hydra 2.3 is still able to access its core power overrides on NVIDIA GPUs, even after the driver update. It's unclear if NVIDIA has intentionally blocked mVolt+ or if it's simply an untested combination of mVolt+ and the new NVIDIA driver causing an incompatibility.

NVIDIA Power Limit Bypass: RTX 5090 OC Hits 700 W, RTX 5080 Up To 680 W. No Shunt Mod Needed

The latest mVolt+ v0.36 update added a number of video card power and voltage management features that appear to make it possible to bypass the stock power limits of some NVIDIA RTX 50-series GPUs without the typical shunt mod or flashing a new vBIOS. Using the new capabilities, one user on r/Overclocking on Reddit claims to have reached 700 W total power draw on their NVIDIA GeForce RTX 5090, scoring 16,523 points in 3DMark Steel Nomad in the process. That's a 125 W up from a stock 5090 TDP of 575 W.

Based on the screenshots of the aforementioned 3DMark benchmark, the GPU topped out at 3,127 MHz, which is a substantial 720 MHz higher than the reference design's 2,407 MHz clock speed. Another user, reporting their results to VideoCardz, managed to overclock an ASUS ROG Astral NVIDIA GeForce RTX 5080 OC to draw a total of 680 W, up from a stock TDP of 400 W—although this can be increased to 450 W with an official tool. In this case, the user notes that there is no shunt mod in use.
Return to Keyword Browsing
Nov 17th, 2026 16:10 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts