1st Player Steampunk PS-850SP 850 W Review 10

1st Player Steampunk PS-850SP 850 W Review

(10 Comments) »

Value and Conclusion

  • The 1st Player Steampunk PS-850SP can be found for $89.99.
  • Tolerant to high operating temperatures
  • Affordable
  • High price to performance ratio
  • High build quality
  • Load regulation at +12 V and 5 V within 1%
  • Highly efficient 5VSB rail
  • Excellent EMI suppression
  • Accurate power ok signal
  • Vampire power below 0.1 W
  • Fully modular
  • Adequate distance between peripheral connectors
  • 7-year warranty
  • Overall performance is not competitive
  • Transient response could be better
  • Efficiency needs a boost
  • Noisy operation at high loads
  • The fan-speed profile needs tuning
  • Sleeve bearing fan
  • Low hold-up time and power ok signal below 16 ms
  • Not ASM compatible
The Steampunk 850 W cannot compete with such PSUs as the Corsair RM850x, Seasonic GX-850, or Cooler Master V850 V2 Gold, but is considerably more affordable. As such, its performance per price ratio is high, as is its build quality for all but the cooling fan. It was a pleasant surprise to see Japanese capacitors everywhere in my sample, which will easily outlive the long warranty. That having been said, a larger bulk cap is required for a longer hold-up time. Moreover, it would be great to see Alternative Sleep Mode compatibility and over 70% efficiency with 2% load to meet the newest ATX specification requirements.

As for overall performance, the difference to the tough competition is not that large as it is in noise output, where the Steampunk PS-850SP is in need of tuning. With a Cybenetics Standard+ rating and 36.86 dBA, average noise output is among the highest for 850 W Gold units, close to the for its fireworks legendary Gigabyte P850GM, and the Deepcool DQ850-M-V2L. The semi-passive operation doesn't help much since the fan repeatedly starts at high speeds at light and moderate loads to remove the heat, which can be annoying. Deactivating semi-passive mode and having the fan spin at all times is preferable. Speaking of the fan, I am not fond of Yate Loon products because they don't match Globe Fan and Hong Hua in terms of quality. Instead, I would prefer paying slightly more for a better fan, which would increase the PSU's reliability, especially under harsh operating conditions.

Compared to the Steampunk 750 W unit I reviewed some years ago, this platform uses different parts in the 5VSB circuit which result in higher efficiency. Also, it has better capacitors on the secondary side. However, the cooling fan is unfortunately the same in both models.

To wrap up, if you don't want to pay considerably more to get a Corsair, Seasonic, or Cooler Master PSU of similar capacity, the Steampunk 850 W is a very good choice at $90, especially if 1st Player keeps using the Japanese caps on the secondary side, which are difficult to find nowadays.
Budget
Discuss(10 Comments)
View as single page
Nov 20th, 2026 14:31 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts