A Look Inside
Opening the G3A reveals one of its most unusual design choices, since the main electronics and cooling hardware are assembled on a removable internal system module. After the outer chassis is released, that module easily slides out as a single unit, exposing the motherboard, memory, storage, graphics card, and cooling hardware instead of forcing the owner through several layered covers.
The CPU and graphics card also have their own cooling hardware, with separate fans moving air through each side of the internal module. The RTX 2000 Ada is also a real low-profile dual-slot PCIe graphics card, rated at 70 W with 16 GB of ECC GDDR6 and a PCIe 4.0 x8 interface. A replaceable graphics card is not seen very often in a system this small.
Memory and storage access are similarly desktop-like, with two DDR5 SO-DIMM slots and two M.2 2280 positions available inside the removable module. My sample uses two 16 GB Kingston modules for 32 GB of dual-channel DDR5-5600, and the current retail configuration supports up to 96 GB through those two SO-DIMM slots.
The factory drive is a 1 TB Huawei eKitStor Xtreme 200E, a DRAM-less PCIe 4.0 NVMe SSD. It is more of a mainstream, cost-conscious drive than a premium model, although its rated sequential speeds of up to 7,000 MB/s read and 6,500 MB/s write are still quite high for PCIe 4.0 (we'll see how it actually performs in our storage benching section). Huawei rates the 1 TB version for 400 TBW and covers it with a five-year warranty, so this is not some unknown generic SSD thrown into the system to keep costs down. A second M.2 2280 slot is available for another NVMe drive, and there is also a 2.5-inch SATA bay if you want to add cheaper bulk storage.