Package
The ADATA SD820 comes in a cardboard box with a glossy surface treatment. There's plenty of information on the box about the various features and specs of the drive.
The box also lists out details such as the drive's IP6X dustproof rating, and IPX8 waterproof rating, which lets the drive survive down to 1 m depths for up to 1 hour. The drive is also tested for compatibility with PlayStation 5 and Xbox Series X/S, and can be used as a game install drive.
Inside the box, you get a 25 cm long cable, and a multilingual quick start guide.
The Drive
The ADATA SD820 features a sporty, outdoorsy appearance with a 2-tone color design consisting of matte black with contrasting blue accents that are made of rubber. The decals have a carbon fiber appearance.
To find the connector, flip the drive and find a gap near the front end to open its captive cap. This cap needs to remain closed for the drive's waterproofing to work. Here you can find the type-C port of the drive. The SD820 features a 20 Gbps USB 3.2 Gen 2x2 host interface.
This is what the drive looks like with its cable attached. The barely 27-gram drive dangles against the thick USB 3.2 cable.
This is how big the drive is next to a common AA battery.
Teardown
It is fairly straightforward to take the ADATA SD820 apart. Find a slightly wider gap between the two halves in the port cavity under the rubber flap, and gently pry your way from there, opening one lock on each side, in an alternating fashion.
Once apart, you'll find the PCB nested in one of the halves, clutched onto by a series of four standoffs.
The PCB of the SD820 is a simple affair, thanks to the USB-native controller. The only chips on the drive are the controller and two NAND flash chips, one on each side.
At the heart of the ADATA SD820 is the Silicon Motion SM2322G, a USB-native portable SSD controller, which features a 20 Gbps USB 3.2 Gen 2x2 host interface and puts out four NAND flash channels. There's no need for discrete bridge chips or USB-PD controllers; it's all integrated into this chip.
The 1 TB variant of the ADATA SD820 we're reviewing has two of these rebadged Micron 232-layer 3D QLC NAND flash chips, bearing part number MT29F4T08GMLDHD4-M:D.