Thermal Throttling
Due to the compact form factor, M.2 drives lack the ability to actively cool themselves, usually having to rely on passive airflow instead. All vendors include some form of thermal throttling on their drives as a safeguard, which limits throughput once a certain temperature is exceeded.
On this page, we will investigate whether the tested drive has such a mechanism, how high temperatures get, and what effect this has on performance. We will test the drive in a typical case, installed in the M.2 slot between the CPU and graphics card.
Each of the charts has time moving from left to right, showing transfer speeds in MB/s and also reporting the drive's temperature in degrees Celsius (measured using SMART).
Real-Life Temperatures
This new thermal testing approach simulates typical SSD workloads using PCMark10 storage traces, which replay real-world disk usage without executing the full applications. It helps us create consistent, realistic usage patterns, not just primitive synthetic "random read" or "random write" operations. We can also reduce idle gaps in the trace playback to make the SSD work harder, but not unrealistically so. The recorded activity comes from apps like Adobe and Office, as well as gaming and file transfers. We repeat the entire test sequence three times to extend the total workload duration, followed by a cool-down period to observe how the SSD dissipates heat.
No thermal throttling.
Thermal Stress Test
In these tests, the SSD is hammered by nonstop incoming writes to simulate worst-case thermal stress under the heaviest possible load. The test also checks how the drive deals with thermal throttling and whether it continues to function normally.
Bare Drive with Heat Spreader
As you can see, even with the heat spreader installed, the drive throttles fairly quickly. On the other hand, if you have only light workloads that last for just a few seconds, then throttling won't be an issue.
Drive with Thermalright Heatsink
I also installed a Thermalright TR-M2, which is a compact full-metal heatsink. There's still some throttling, but it happens much later.
Drive with big Thermalright Heatsink
With the much bigger Thermalright HR-10, there is almost no thermal throttling, it takes five minutes at full speed before that happens.
Thermal Image & Hot Spot
We recorded a thermal image of the running SSD as it was completing the thermal stress test. The surface temperature of the heat spreader reached only 82°C. This is very low, but not because the heat output is so low, but rather it means that the thermal throttle point is set very low, so the drive will start throttling earlier than others. A higher limit would help avoid thermal throttling. These chips are designed to run at much higher temperatures without issues.