VRM Overview
There are two large heatsinks cooling both banks of VRMs comprising an 18+1+1+1 power phase design, these did a reasonable job of cooling the power delivery, with components peaking just above 60°C after nearly 30 mins of stress testing, once temperatures levelled off. Considering this was with a Core Ultra 9 285K, this is decent, and offers a good amount of headroom if you want to overclock too.
Initially it appeared that the heatsinks were linked with a heatpipe as they detached as one piece, but they're actually just screwed together. This allows a small amount of thermal transfer between them to balance any heat loads, although still not as fluidly as a heatpipe solution offers.
The 18 vCore stages are made up of 80 A Monolithic Power Systems MPS2415 MPS87681's, which have also been used on the likes of the ASUS ROG Maximus Z890 Hero.
Additionally, we also have a pair of Potens Semiconductor DEC3908CX and DC39F2BX MOSFETs, which we've seen elsewhere such as on this board's sibling, the ASRock Phantom Gaming B850 Riptide Wi-Fi. This Z890 model also uses the Monolithic Power Systems MPS 2427 MP29005-A PWM controller.