ASUS ROG RYUO IV 360 ARGB Review 21

ASUS ROG RYUO IV 360 ARGB Review

Finished Looks »

Installation


To install the ASUS ROG RYUO IV 360 ARGB the first step is to make sure the fans are installed the way you want them for cable management. Once that is sorted out on AM5 you will need to remove the motherboard's black brackets and install the included ones with the original screws.


Next if you're using the pre-applied thermal paste you can skip this step; otherwise, clean the copper cold plate and apply your thermal paste of choice. For my tests, I use Arctic MX-6. With everything set up, align the pump block over the CPU and start tightening the retention screws to the mounting bracket, alternating in a crisscross pattern to ensure even pressure. Once that is sorted attach the radiator and fans to the chassis.


Next slide the AMOLED display onto the pump and position it as you like, then plug everything in. After that you just need to boot the system up and install the ASUS InfoHub software suite. While the software has the usually ROG flair, it's exceptionally simple and easy to work with.

Overall, the installation is very easy on AMD and Intel, with no real complications. While I expected some potential issues due to the shorter tubing length of 400 mm the cooler's design made that a non-issue.
Next Page »Finished Looks
View as single page
Nov 19th, 2026 02:37 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts