be quiet! Dark Power 14 850 W ATX 3.1 Review 5

be quiet! Dark Power 14 850 W ATX 3.1 Review

Results »

Test Methodology

Our new 2025 PSU review tests are performed with the power supply operating at 230 V/50 Hz mains. A Rigol oscilloscope is used for ripple noise measurements and the noise levels are recorded using a calibrated microphone at a distance of 1 meter from the tested PSU. The dBA noise values are just for the PSU—there are no other noise sources in the acoustic testing environment. Multiple electronic loads draw power from the tested power supply. In order to be able properly stress high capacity PSUs, we have allocated 4x 400 W for 12 V, 1x 200 W for 5 V and 1x 200 W for 3.3 V, which brings the total testing capacity to 2000 W sustained.




The Dark Power 14 850 W has the following current ratings:
  • 12 V: 30 A x2 + 35 A x2 (70 A x1 in OCK mode?)
  • 5 V: 24 A
  • 3.3 V: 24 A
It appears obvious that the maximum current ratings of each 12 V rail are for ONLY that rail loaded, as running them at maximum current simultaneously (130 A) would be 1560 W. The quoted maximum power across all 12 V rails simultaneously being 840 W gives us a total continuous current of 70 A. It's odd that be quiet! do not list a single rail rating given that the supply has this functionality; in fact the spec list just has a hyphen next to "12 V single rail operation." I suspect this is an oversight on the product page.

Load testing will be performed with the 0RPM mode "ON" and the OCK mode "ON."
Next Page »Results
View as single page
Nov 21st, 2026 04:55 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts