Thermal Throttling
Due to the compact form factor, M.2 drives lack the ability to actively cool themselves, usually having to rely on passive airflow instead. All vendors include some form of thermal throttling on their drives as a safeguard, which limits throughput once a certain temperature is exceeded.
On this page, we will investigate whether the tested drive has such a mechanism, how high temperatures get, and what effect this has on performance. We will test the drive in a typical case, installed in the M.2 slot between the CPU and graphics card.
Each of the charts has time moving from left to right, showing transfer speeds in MB/s and also reporting the drive's temperature in degrees Celsius (measured using SMART).
Real-Life Temperatures
This thermal testing approach simulates typical SSD workloads using PCMark10 storage traces, which replay real-world disk usage without executing the full applications. It helps us create consistent, realistic usage patterns, not just primitive synthetic "random read" or "random write" operations. We can also reduce idle gaps in the trace playback to make the SSD work harder, but not unrealistically so. The recorded activity comes from apps like Adobe and Office, as well as gaming and file transfers. We repeat the entire test sequence three times to extend the total workload duration, followed by a cool-down period to observe how the SSD dissipates heat.
With nothing but its own label on it, the drive peaks at 62°C during the trace playback—well clear of the 79°C point where the controller starts throttling. For normal desktop use the NV7400 needs no heatsink at all.
Thermal Stress Test
In these tests, the SSD is hammered by nonstop incoming writes to simulate worst-case thermal stress under the heaviest possible load. The test also checks how the drive deals with thermal throttling and whether it continues to function normally.
Drive without Heatsink
The naked drive with just its label cannot hold full speed for long in our stress test. It reaches 79°C after around 90 seconds and then performance drops, to a still respectable 3.5 GB/s. That's still not enough to keep the drive under the throttle temp, so another drop happens that pretty much stops the drive for a few seconds, until it has time to cool off, then performance is restored quickly. A thermal throttle point of 79°C is quite low, though, other vendors go much higher here, without any risk of damage.
Drive with Small Thermalright Heatsink
I installed a Thermalright TR-M2, which is a compact full-metal heatsink. That's all it takes to sustain full speed.
Drive with Big Thermalright Heatsink
The much bigger Thermalright HR-10 doesn't throttle either, as expected, and it runs a bit cooler, but really not a huge difference.
Thermal Image & Hot Spot
For this thermal image, we deliberately ran the drive without a heatsink, to reveal where the heat concentrates on the PCB. The controller is by far the hottest spot, reaching slightly over 80°C, which confirms the thermal limit and that it works properly.