Chieftec Polaris Series 750 W Review 19

Chieftec Polaris Series 750 W Review

(19 Comments) »

Introduction

Chieftec Logo

I would like to thank Chieftec for supplying the review sample.


It's been a long time since my last Chieftec review, so it was a pleasant surprise to have something new from the brand for evaluation. The new Chieftec Polaris line consists of three units with capacities ranging from 550 to 750 W. All are 80 PLUS Gold certified, and the strongest member of the line has also been certified by Cybenetics, achieving ETA-A efficiency and LAMBDA-Standard++ noise ratings. Given this platform's efficiency, I expected a quieter operation, especially taking into account Chieftec is a German company, as Germans are known to prefer silent PC components. A LAMBDA-Standard++ noise rating isn't bad. However, it is no match for the LAMBDA-A rating the Corsair RMx model of similar capacity achieves.

The Chieftec Polaris Series 750 W, or PS-750FC, is fully modular and made by High Power, a pretty good OEM, especially in the mid-price segment. The platform is modern, and this PSU is about €20 less than the highly popular Corsair RM750x that is very close to the equally popular Seasonic Focus Plus Gold 750 W, which means the Chieftec unit will have to achieve high performance to stay competitive. With a quick look at the specifications, I noticed the short warranty, which is a significant downside because the Corsair and Seasonic models offer much longer warranties of 10 years.

Specifications

Chieftec PPS-750FC
Features & Specifications
Max. DC Output750 W
PFCActive PFC
Efficiency80 PLUS Gold and ETA-A (88%–91%)
NoiseLAMBDA-S++ (30–35 dBA)
ModularYes (fully)
Intel C6/C7 Power State SupportYes
Operating temperature0–50 °C
ProtectionsOver Voltage Protection
Under Voltage Protection
Over Power Protection
Over Temperature Protection
Over Current Protection
Short Circuit Protection
Cooling120 mm Sleeve Bearing Fan
(PY-1225M12s)
Semi-passive operationNo
Dimensions (W x H x D)150 mm x 85 mm x 140 mm
Weight1.3 kg (2.87 lb)
ComplianceATX12V v2.31, EPS 2.92
Warranty2 years
Price at Time of Review (incl. 19% VAT)97€
Chieftec PPS-750FC
Power Specifications
Rail3.3 V5 V12 V5 VSB-12 V
Max. Power22 A22 A62.5 A3 A0.3 A
120 W750 W15 W3.6 W
Total Max. Power750 W

Photos


Foam spacers surrounding the PSU inside the box offer adequate protection. The user manual is common to all three members of the line, and the bundle is poor, only consisting of the four screws to mount the PSU. No Velcro straps or even zip ties are included.


This is a compact PSU. As per usual, the power specifications label is on the bottom, and the modular panel on the back has eight sockets.


The badge in the middle of the fan grill is large. They should make it a little smaller to have it block less of the airflow for the fan.

Cables and Connectors

Modular Cables
DescriptionCable CountConnector Count (Total)GaugeIn Cable Capacitors
ATX connector 20+4 pin (650 mm)1118–22AWGNo
4+4 pin EPS12V (650 mm+150 mm)1216–18AWGNo
6+2 pin PCIe (500 mm+150 mm)2416–18AWGNo
SATA (450 mm+150 mm+150 mm+150 mm)2818AWGNo
4-pin Molex (450 mm+150 mm+150 mm) / FDD (+150 mm)33 / 118–22AWGNo
AC Power Cord (1380 mm) - C13 coupler1118AWG-


The cables are long, and there are enough connectors. At 150 mm, all connectors are also adequately far apart.


The major downside is the installation of both EPS connectors on the same cable. Even the 16AWG gauges up to the first EPS connector are not enough to handle the full load a pair of these connectors can deliver.

Component Analysis

Before reading this page, we strongly suggest a look at this article to better understand what is going on inside a PSU.

Chieftec PPS-750FC Parts Description
General Data
Manufacturer (OEM)
High Power
PCB Type
Single Sided
Primary Side
Transient Filter
4x Y caps, 2x X caps, 2x CM chokes, 1x MOV
Bridge Rectifier(s)
2x GBU1006F (600 V, 10 A @ 100 °C)
Inrush Current Protection
NTC Thermistor & Relay
APFC MOSFETs
2x Infineon IPA60R120P7 (650 V, 16 A @ 100 °C, 0.12 Ohm)
APFC Boost Diode
1x USCi UJD06508TS (650 V, 8 A @ 152 °C)
Hold Up Cap(s)
1x Nichicon (400 V, 680 uF, 2,000 h @ 105 °C,  GG
Main Switchers
2x Infineon IPA60R180P7S (650 V, 11 A @ 100 °C, 0.18 Ohm)
APFC Controller
Infineon ICE3PCS01G
Switching Controller
Champion CM6901X
Topology
Primary side: Half-Bridge & LLC converter
Secondary side: Synchronous Rectification & DC-DC converters
Secondary Side
+12 V
6x Infineon BSC027N04LS (40 V, 88 A @ 100 °C, 2.7 mOhm)
+5 V & +3.3 V
DC-DC Converters: 4x Advanced Power AP3R303GMT (30 V, 25 A @ 70 °C, 3.3 mOhm)
PWM Controllers: ANPEC APW7159C
Filtering Capacitors

Electrolytic:
6x Rubycon (3 - 6,000 h @ 105°C, YXG),
2x Nippon Chemi-Con (1 - 2,000 h @ 105 °C, KMG),
5x Teapo (1 - 3,000 h @ 105°C, SC)

Polymer:
7x Teapo

Supervisor IC
SITI  PS224 (OCP, OVP, UVP, SCP, PG)
Fan Model
Poweryear PY-1225M12S (120 mm, 12 V, 0.26 A, Sleeve Bearing Fan)
5VSB Circuit
Rectifier(s)
1x PFC P10V45SP SBR (45 V, 10 A) & IPS ITA04N65R] FET (650 V, 4 A, 2.8 Ohm)
Standby PWM Controller
ON Semiconductor NCP1230
-12V Circuit
Rectifier
KEC KIA7912PI (-12 V, 1 A)


Soldering quality is good, but I don't like the single-sided PCB and Chemi-Con KMG and Teapo SC caps High Power uses on the secondary side because of their short lifetime. The same goes for the sleeve bearing fan, which is out of place in a PSU that costs close to €100. Chieftec should have at least gone with a rifle bearing fan.


The transient filter consists of all the necessary components, including an MOV, but given the EMI results I got, its performance is pretty bad.


An NTC thermistor and bypass relay combo protect against large inrush currents.


The two bridge rectifiers can handle up to 20 A of current, which is more than enough for this platform.


The APFC converter uses two Infineon FETs and a single boost diode from USCi, a company I have never heard of before. The bulk cap is by Nichicon and has enough capacity for a hold up time of over 17 ms.


The main FETs are arranged in a half-bridge topology, and an LLC resonant converter is used for increased efficiency.


The heat sinks on the secondary side are used to cool down the FETs on the other side of the PCB. Six FETs in total handle the +12 V rail.


The -12 V rail has its own regulator IC, a KIA7912PI, which is great because it provides OTP and SCP protection and means the PSU won't break if something goes wrong with even the -12 V rail most PC components do not use.


Half of the electrolytic caps on the secondary side are of low quality. Thankfully, High Power used some decent Rubycon caps which will handle most of the ripple filtering load. There are also several polymer caps by Teapo, which are much more tolerant to heat than the electrolytic caps.


Two voltage regulation modules generate the minor rails.


The 5VSB circuit uses a FET on its primary side and an SBR on the secondary side. The standby PWM controller is an NCP1230 by On Semiconductor.


The supervisor IC is a SITI PS224—it supports all necessary protection features but OTP. The latter is implemented through another circuit which reports to the PS224.


Several polymer caps are installed at the face of the modular panel. As you can see in the photos above, there is room for several more.


Soldering quality is good.


The sleeve bearing fan is by Poweryear. Chieftec should switch to a better fan given their pricing for this PSU. Nowadays, you see even super-budget PSUs, like the Corsair CX450, use rifle bearing fans.
Our Patreon Silver Supporters can read articles in single-page format.
Nov 18th, 2026 19:08 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts