Cougar CFV235 Mesh Vision Review 6

Cougar CFV235 Mesh Vision Review

A Closer Look - Inside »

A Closer Look - Outside


Out of the box the case features simple straight lines. The visual uniqueness stems from the fact that there is a gap between the PSU bay and the main chassis compartment, so that air can be pulled in from the bottom of the chassis. Cougar adds structural support in form of plastic clips at the corners, including a warning sticker on the top to make sure you don't put too much weight on it. That said, the case is pretty sturdy overall.


As this is the mesh version, the front is vented and comes equipped with two 160 mm intake fans. Those wanting a bit more visibility into the chassis can opt for the non-Mesh variant, which sports glass instead. In the rear, the general layout of the CFV235 Mesh Vision is pretty traditional for a modern ATX case, if you ignore the fact that the PSU bay is self-contained.


The main side panel is all glass, and framed in black on three sides. It looks like Cougar does not differentiate between the versions, as these strips will fit perfectly alongside a glass front panel, while it does look a bit odd on the mesh variants. Fortunately, Cougar has embedded the front fans nicely inside a plastic shell, so things still look very clean. On the opposite side, you will find a metal panel with a finely perforated mesh section to allow for air intake, while also acting as a dust filter.


The chassis ships with two orange USB-A and one USB-C port next to an audio combo header. The smaller button allows for ARGB control, while the bigger one with the embedded LED is the power switch. As this is the Mesh Vision variant, Cougar also embeds a display.


The PSU bay is pretty basic, but should be perfectly functional. As the case sits flat on the surface where you place it—without any clearance—you are meant to install your power supply with the fan pulling in air from the top. That's why you get that gray cover, which also acts as a dust filter. Above that are the seven expansion slots, as these are bridgeless, you can source and use vertical mounting brackets for your GPU. At the top there is a 120 mm ARGB exhaust fan. Thanks to the elongated mounting holes, you will be able to adjust its height placement to accommodate your motherboard layout around your CPU and any liquid cooling in the ceiling.


On the top there is another flat panel, perforated for the fan or radiator mounting holes below. You may install three 120 mm or two 140 mm fans here, but most will likely opt for a 280/360 mm AIO instead.


The underside of the Cougar CFV235 Mesh Vision is completely solid, but there is a dust filter on the floor of the main compartment to keep dust and grime out.
Next Page »A Closer Look - Inside
View as single page
Nov 20th, 2026 23:52 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts