The Crucial MX300 M.2 525 GB doesn't hold any surprises so long as you know that it uses the SATA interface via PCIe and not NVMe. This means that peak transfer speeds are limited to about 500 MB/s due to the interface. So you're not gonna see the flashy gigabyte numbers that competing high-end NVMe drives provide. Rather, the MX300 M.2 gives you the MX300 2.5" in a more convenient form factor. Be aware, though, that adding a SATA M.2 drive will not magically give you more SATA connectivity. All motherboards support a fixed number of SATA drives and that capability is shared between the cabled ports and the M.2 slots (when they use SATA). Your motherboard manual will tell you which SATA port gets disabled when a SATA SSD is installed in its associated M.2 port.
Average performance numbers of the MX300 are trailing those of other drives in our test group, but not by a huge amount. In actual applications, the NVMe SSDs are about 10%–15% faster, depending on the application, of course. The gap to the fastest 2.5" SSDs is a mere 4%. The MX300 will lose big time when it comes to large-file copying, but it can keep up very well in the other tests. The underlying reason is that even SATA SSDs are mostly fast enough for today's consumer applications as the bottleneck has shifted to CPU/memory/Windows API and program code.
Unlike many other PCIe NVMe drives, the MX300 lacks a heatsink, which isn't a big deal because the drive doesn't throttle in even our worst-case scenario testing. Yes, the drive does get quite warm with 80°C, but that's not overheating; electronic circuits are designed for such temperatures and above. Of course, the limited transfer rate of the SATA interface plays a role in that, as that bottleneck prevents the drive from getting any warmer at some point.
What really makes the MX300 an interesting M.2 choice is its pricing. With just $140, it's one of the most affordable M.2 drives - perfect for a small form factor PC where you don't want to deal with bulky 2.5" drives or the cable mess in a larger case. Right now, the 2.5" SATA version costs $10 more - I see no reason why that extra cost would be justified. The biggest competition to the MX300 comes in the form of Crucial's own MX500, which is faster and cheaper, offers five years of warranty instead of three, and has higher endurance (which probably only matters on paper for most). The MX500 has been announced for both the 2.5" and M.2 form factor, but actual M.2 products are not available in stores yet. Overall, the MX300 M.2 is a decent drive for any consumer PC, and affordable, too.