ECS GANK MACHINE Z87H3-A2X EXTREME (Intel LGA 1150) Review 32

ECS GANK MACHINE Z87H3-A2X EXTREME (Intel LGA 1150) Review

Overclocking Performance Summary »

Overclocking - The Hardware


The buttons at the bottom-right edge of the ECS GANK MACHINE were to me the first indication of this board being more than I had expected. Power, RESET, and OC-enabling buttons, and one for the POST display and another for BIOS switching, are present. I also found another button slightly apart from the others; it is used to back one BIOS chip up to the other.


The POST LED display has several functions, each of which you can “scroll” through by pushing the appropriate button. What is being displayed is indicated by the small LEDs next to the POST display, showing figures for CPU temperatures, CPU voltage, CPU power draw, and temperature of the CPU's VRM, and there are the POST codes while the board boots up. You can measure other critical system voltages in real-time by using the provided measuring point I mentioned earlier.


The ECS GANK MACHINE has a VRM design that reminds me of many high-end VGAs from the past, although I have never seen the Intersil ISL6367H controller I found next to the shark's "tail" before.


The opposite end of the heatsink has a little fan stuffed into it, with a wire coming out and attaching to the board's surface nearby. The heatsink brushes up against the CPU VRM chokes and sits on top of the MOSFETs, which affords them a bit of additional cooling. It wasn't until I looked closely at this contraption that I realized the heatsink really was a shark, or some sort of fish.


I pulled the tail of the cooler off to get a look at what VRM components might be used here, only to find some very familiar MOSFETs in metallic packaging, rather than the plastic or ceramic we see so so very often. That added boost to cooling helps them stay efficient and provide clean power.


The last little thing I took notice of here, on the ECS GANK MACHINE, was its DIMM-slot design. You'll see the DIMM slots equally spaced apart on most other boards, separated into two obvious, succinct units. ON the ECS GANK MACHINE, however, the slot arrangement is such that each DIMM is offset a bit from all the others, leading to the first two DIMMs being very close to one another while the other two are a fair bit apart. I, at first, thought this to just be a visual trick, but looking closely at the board's surface, you can see in print there, above each slot, that the space between them differs, which yet again shows ECS's attention to details—those slots are spaced so for a reason.
Next Page »Overclocking Performance Summary
View as single page
Nov 19th, 2026 17:58 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts