Introduction

Endgame Gear is a peripherals company based in Germany. The OP1 8K V2 introduces several novelties compared to the OP1 8K. Most notably, the sensor has been upgraded to a custom variant of PixArt's PAW3950 capable of 30,000 CPI going by the designation U+1F95A, which is the Unicode character for, well, an egg. Compared to a regular 3950, this variant brings CPI adjustment in increments of 10 for steps below 10,000 CPI as well as sensor angle adjustment from +127° to -127°, and the sensor framerate has been set to the maximum of roughly 20,500. Furthermore, the OP1 8K V2 comes with a Kailh scroll wheel encoder instead of the OP1 8K's TTC Silver. For the main buttons, the OP1 8K V2 still utilizes so-called GX switches from Kailh, which have both a top and bottom contact (SPDT, single-pole and double-throw). Hence, when actuating the switch, the click can already be registered when the top contact has been disengaged, instead of having to wait until the bottom contact is closed, reducing physical latency in the process. In addition, the GX switch can also be employed as a way of providing additional hardware debouncing, preventing unintended double-clicking. Weighing 50 g, the OP1 8K V2 does without holes or an open-bottom design. The feet are made of pure PTFE, and the cable is the particularly flexible "Flex Cord 5.0." Configuration is possible within lightweight software that doesn't require installation. The OP1 8K V2 is available in either black, white, or Dark Frost.

Specifications