Endgame Gear is a peripherals company based in Germany. The XM2w 4K V2 introduces several novelties compared to the XM2w 4K. Most notably, the sensor has been upgraded to a custom variant of PixArt's PAW3950 capable of 30,000 CPI going by the designation U+1F95A, which is the Unicode character for, well, an egg. Compared to a regular 3950, this variant brings CPI adjustment in increments of 10 for steps below 10,000 CPI as well as sensor angle adjustment from +127° to -127°, and the sensor framerate may be set to the maximum of roughly 20,000. Furthermore, the XM2w 4K V2 comes with a Kailh scroll wheel encoder instead of the XM2w 4K's TTC Silver. For the main buttons, the XM2w 4K V2 still utilizes so-called GX switches from Kailh, which have both a top and bottom contact (SPDT, single-pole and double-throw). Hence, when actuating the switch, the click can already be registered when the top contact has been disengaged, instead of having to wait until the bottom contact is closed, reducing physical latency in the process. In addition, the GX switch can also be employed as a way of providing additional hardware debouncing, preventing unintended double-clicking. Weighing 60 g, the XM2w 4K V2 does without holes or an open-bottom design. The XM2w 4K V2 comes with a USB high-speed dongle by default, allowing polling rates of up to 4000 Hz in wireless operation. At 4000 Hz, Endgame Gear cites up to 40 hours of battery life, as the XM2w 4K V2 has virtually all power-saving features disabled to ensure the highest possible performance, though a power-saving mode for longer battery life is also available. The feet are made of pure PTFE, and configuration is done in a lightweight utility that does not require installation. The XM2w 4K V2 is available in either black, white, Dark Frost, or White Frost.