EVGA GeForce RTX 3080 FTW3 Ultra Review 47

EVGA GeForce RTX 3080 FTW3 Ultra Review

Circuit Board Analysis »

Packaging

Package Front
Package Back


The Card

Graphics Card Front
Graphics Card Back
Graphics Card Front Angled

EVGA has completely revamped their design language with the RTX 30 series. Instead of a transparent cooler shroud we now get classic black that's paired with silver metal highlights and a red trim. I have to say I really like the red, even though it clashes a bit with NVIDIA's "green" color theme. On the back you'll find a high-quality metal backplate.

Graphics Card Dimensions

Dimensions of the card are 30 x 14 cm.

Graphics Card Height
Graphics Card Back Angled

Installation requires three slots in your system.

Monitor Outputs, Display Connectors

Display connectivity options include three standard DisplayPort 1.4a and one HDMI 2.1. Interestingly, the USB-C port for VR headsets, which NVIDIA introduced on Turing Founders Editions, has been removed—guess it didn't take off as planned. The DisplayPort 1.4a outputs support Display Stream Compression (DSC) 1.2a, which lets you connect 4K displays at 120 Hz and 8K displays at 60 Hz. Ampere can drive two 8K displays at 60 Hz with just one cable per display.

Ampere is the first GPU to support HDMI 2.1, which increases bandwidth to 48 Gbps to support higher resolutions, like 4K144 and 8K30, with a single cable. With DSC, this goes up to 4K240 and 8K120. NVIDIA's new NVENC/NVDEC video engine is optimized to handle video tasks with minimal CPU load. The highlight here is added support for AV1 decode. Just like on Turing, you may also decode MPEG-2, VC1, VP8, VP9, H.264, and H.265 natively, at up to 8K@12-bit.

The encoder is identical to Turing. It supports H.264, H.265 and lossless at up to 8K@10-bit.

Graphics Card Power Plugs

Unlike the NVIDIA Founders Edition card that introduces the new 12-pin power input, EVGA sticks to industry standard 8-pin PCIe power inputs, but there are three of them. Combined with PCIe slot power, this configuration is rated for 525 W.


Near the back of the card you'll find two pin headers. The first one is to provide an RGB signal to other components, so they can be synced with the graphics card RGB. The second one lets you connect a case fan to the graphics card, making it spin at the same rate as the GPU fans. Since the graphics card is the highest heat output in most computers, this makes a lot of sense—idle fan stop during browsing and productivity—fans running when gaming.


This BIOS switch lets you toggle between the normal (default) BIOS and an "OC" BIOS. Both BIOSes run the same clocks and voltages, the only difference is that "OC" has no fan-stop and the fan curve is a bit more aggressive.

Multi-GPU Area

The GeForce RTX 3080 does not support SLI. Its bigger brother, the RTX 3090, has SLI support. As both are based on the GA102 GPU, it's purely a segmentation choice. Multi-GPU really isn't supported widely anymore, so it's no big deal.

Teardown

Graphics Card Cooler Front
Graphics Card Cooler Back

EVGA's heatsink uses a copper baseplate to spread the heat, and six heatpipes that move the heat away quickly from the GPU.


The backplate is made of metal and protects the card against damage during installation and handling. It would have been nice to see some thermal pads here, like on other cards, to reduce temperatures by a degree or two.
Next Page »Circuit Board Analysis
View as single page