Out of the box, the case manages to offer a few fairly unique design elements. Naturally, the front glass with two bent edges is quite unusual - especially at this price point. On top of that, the shape of the shroud requires the side glass panel to have an odd shape as well. Formula V Line has done an excellent job creating these components.
Looking at the front, it's all glass, with black framing applied to draw your eye mostly towards the clear left bend, that connects to the side glass panel. In the rear, the Crystal U9 PA looks very much like any modern chassis with the PSU located at the bottom.
The main side glass is framed in black as well, with the one edge that butts up to the front void of such a strip. On the opposite side, Formula V Line has added vented sections for the side intake as well as the area below the shroud. Both are needed to give intake fans access to cool air, which not only includes the three pre-installed ones on the side, but also the two optional ones you could install on the shroud.
The entire solid element underneath the glass is made of plastic, which allows for some subtle design elements, but also means you have to make do with this lesser material instead of metal. The company brand has been placed on the area towards the rear, while you can find a traditional set of I/O towards the front in the angled section. Formula V Line has opted to focus on just providing a power button, so there isn't one to allow you to reset your system, and it is also missing any activity or power LEDs.
In the rear, below the shroud, the PSU bay comes equipped with a single set of mounting holes. Above that, you will find the seven expansion slots, each protected by a reusable cover. As this area is bridge-less, you should be able to use universal vertical GPU mounts without issue. In the very top, there is room for a 120 or 140 mm fan. Formula V Line includes a 120 mm ARGB equipped one, to push air out the back of the Crystal U9 PA. These fans are secured using elongated mounting holes, so you can adjust the vertical position to suit your needs.
The top is made entirely of plastic as well, but also sports a very airflow focused layout with large openings. An embedded fine mesh dust filter ensures that no dirt and grime can make its way inside the chassis. You may pull the panel off to reveal mounting positions for either two 140 or three 120 mm fans. This is also where you can install liquid cooling of up to 360 mm in size.
On the underside, there is another fine mesh dust filter to protect the PSU from debris. If you look closely, you will notice three holes to mount your hard drive to. Due to the angled design of the shroud, that is all you get to slide your drive into place. That seems a bit odd, as the space is physically there for that fourth mounting position. The dust filter may be pulled out the back, allowing you to access it without having to tip over your whole system.