G-Wolves Hati-S2 Pro 8K Review 1

G-Wolves Hati-S2 Pro 8K Review

Value & Conclusion »

Software


On the Hati-S2 Pro 8K, configuration is possible only through a web driver, which connects through WebHID and therefore will—at least as of now—only work on Chromium-based browsers such as Chrome, Edge, and Opera (desktop). All options are distributed across a single page. The settings include button remapping to mouse, keyboard, media, and macro functions. CPI adjustment is possible for up to seven color-coded levels, at a range of 50 to 30,000 in increments of 50, and x- and y-axis values may be set independently. Polling rate can be set to 125, 250, 500, or 1000 Hz, with 2000, 4000, and 8000 Hz being exclusive to wireless operation. Competitive mode may be enabled, which sets sensor run mode to corded and will only take effect in wireless operation at polling rates of at and under 1000 Hz, while above 1000 Hz the setting is irrelevant as competitive mode will always be enabled. Further settings include lift-off distance (low/middle/high) and angle snapping (on/off). MotionSync synchronizes SPI reads with USB polls, albeit at the cost of up to an entire interval of added motion delay. Sleep time defines after how much idle time the mouse enters sleep mode, and can be adjusted between 30 and 600 seconds. The sensor angle may be adjusted from -30° to 30°, in increments of 1°. Debounce time may be adjusted for both clicks and the scroll wheel, and by enabling "DIY" mode, even more fine-grained adjustment is possible, such as defining debounce time separately for before and after press or release.

All setting changes are saved live to the on-board memory, and the web driver is able to connect to both dongle and mouse.

Battery Life

G-Wolves does not cite any battery life numbers. The web driver includes a battery charge indicator utilizing increments of 5%, though it isn't particularly reliable or accurate. In fact, it only dropped to 95% even after four hours of continuous usage at 8000 Hz, which seems improbable. As such, I'm not in a position to gauge expected battery life.

Sleep mode is entered after 30 seconds of inactivity by default, but can be adjusted within the software.

Using the included USB Type-A to Type-C charging cable, I measured the charging speed during the constant current stage, which sits at 0.174 A when lifted and 0.161 A when not lifted. The battery has a capacity of 250 mAh (3.7 V) and utilizes a 3-pin JST connector.
Next Page »Value & Conclusion
View as single page
Nov 20th, 2026 15:15 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts