G-Wolves HTM Plus Review 3

G-Wolves HTM Plus Review

Value & Conclusion »

Software


On the HTM Plus, configuration is possible only through a web driver, which connects through WebHID and therefore will—at least as of now—only work on Chromium-based browsers such as Chrome or Edge.

All options are distributed across a single page. The settings include button remapping to mouse, keyboard, media, and macro functions. CPI adjustment is possible for up to seven color-coded levels, at a range of 50 to 30,000 in increments of 50, and x- and y-axis values may be set independently. Polling rate can be set to 125, 250, 500, or 1000, 2000, 4000, or 8000 Hz. Competitive mode may be enabled, which sets sensor run mode to corded and the sensor framerate to its maximum possible value for polling rates of 1000 Hz and under, and sets the sensor framerate to its maximum possible value for polling rates of 2000 Hz and above. Further settings include lift-off distance (low/middle/high) and angle snapping (on/off). MotionSync synchronizes SPI reads with USB polls, albeit at the cost of up to an entire interval of added motion delay. Sleep time defines after how much idle time the mouse enters sleep mode, and can be adjusted between 30 and 600 seconds. The sensor angle may be adjusted from -30° to 30°, in increments of 1°. Debounce time may be adjusted for both clicks and the scroll wheel, and by enabling "DIY" mode, even more fine-grained adjustment is possible, such as defining debounce time separately for before and after press or release. In addition, SPDT may be enabled, which is short for "single-pole, double-throw," and will lower physical click latency by virtue of a click already being registered upon the top contact being opened instead of having to wait for the bottom contact to close. Lastly, the "Key Misoperation Protection" setting determines how many ms worth of defer-type debouncing are applied to clicks in lifted state.

All setting changes are saved live to the on-board memory, and the web driver is able to connect to both dongle and mouse.

Battery Life

G-Wolves does not cite any battery life numbers. The web driver includes a battery charge indicator utilizing increments of 1%, though it isn't particularly reliable or accurate. For every two and a half hours of continuous usage at 8000 Hz with competitive mode enabled, the indicator went down by 10%. As such, around 25 hours of battery life could be expected using these settings.

Sleep mode is entered after 60 seconds of inactivity by default, but can be adjusted within the software.

Using the included USB Type-A to Type-C charging cable, I measured the charging speed during the constant current stage, which sits at 0.231 A when lifted and 0.216 A when not lifted. The battery has a capacity of 220 mAh (3.7 V) and utilizes a 3-pin JST connector.
Next Page »Value & Conclusion
View as single page
Nov 20th, 2026 15:03 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts