Packaging
The Card
The Galax GeForce RTX 5070 EX Gamer 1-Click OC comes with a mostly-black color theme. The transparent fans serve as highlights—they are RGB illuminated. On the back you get a metal backplate with a large cutout.
Dimensions of the card are 32.5 x 13.0 cm, and it weighs 1206 g.
Installation requires three slots in your system. We measured the card's width to be 50 mm.
Display connectivity includes three standard DisplayPort 2.1b and one HDMI 2.1b.
All GeForce RTX 50-series Blackwell cards feature a new display engine supporting DisplayPort 2.1b with UHBR20, as well as HDMI 2.1a. Both interfaces support DSC (display stream compression). With DSC enabled, a single DisplayPort on this card can drive 4K 12-bit HDR at 480 Hz; or 8K 12-bit HDR at up to 165 Hz. The RTX 5070 features an updated media acceleration engine with support for 4:2:2 video formats, AV1 UHQ, and MV-HEVC. Unlike the bigger RTX 50-series models, which have two, there is a single NVENC and NVDEC unit each.
The card uses a single 16-pin connector, which allows a maximum power draw of 600 W, but the board power limit is set much lower of course at 250 W, with a manual adjustment range allowing up to 280 W.
Galax has added an RGB illumination zone near the top right corner of the card. The fans are also illuminated.
Teardown
The Galax thermal solution uses five heatpipes. It provides cooling not only for the GPU, but also for the memory chips and VRM circuitry.
The backplate protects against damage during installation and handling.