Gamdias Notus M1-1201 120 mm Fan Review 7

Gamdias Notus M1-1201 120 mm Fan Review

Performance Testing »

Unboxing and Closer Examination


Consider this a bonus review, since originally Gamdias had reached out for coverage of the RGB version of the Notus M1 and then sent one of these non-RGB fans along with them. The unboxing experience is quite simple and short, and thus I chose to combine it with the closer examination of the fan itself. The product box is adorned with the brand logo and product name on the front in addition to a render of the fan and salient features. We see more features on the back in multiple languages as well as a factory provided P-Q curve for the fan. A double flap with seal over it helps keep the contents in place on their way to you. Open the box to see the fan right away, with a silica gel packet, a simple installation guide, and a set of four self-tapping metal screws accompanying it.


The first thing I noticed with the Gamdias Notus M1-1201 is how a significant portion of the fan frame is covered in anti-vibration rubber pads. Indeed, the brand points it out on the product page, saying 80% of the fan corners have these rubber pads molded in place. It makes for a fan that feels soft to the touch, yet not fragile in any way courtesy the PBT fan frame used. The fan only comes in black color, and there are no LEDs to be seen on this version. There is no fan hub sticker either, with a simple Gamdias logo in monochrome print seen in the middle. The rotor has seven highly curved blades in a design that would make me think of a more hybrid implementation, focusing more on a balance of airflow and static pressure. The blades also get extremely close to the fan frame, with the blade tips 1 mm away to help reduce airflow leakage and deadspots. This is no LCP fan, yet I appreciate Gamdias getting so close. There are arrows on the side to help indicate the direction of airflow through the fan and that of the rotor spinning, should you need it.


I wish Gamdias talked more about the stator vanes here, since it is different from your usual four vanes placed perpendicular. Here we see five curved vanes that are also thinner than usual, and I am not experienced enough in aerodynamics to tell you how much of a factor this will be. Generally the entirety of the fan is factored together in simulations and modeling, so presumably the Gamdias engineers have noticed this working well with the fan rotor and frame too. A sticker on the back tells us the fan is rated for a max current draw of 0.28 A (3.36 W on the 12 VDC rail). This includes start-up boost, and is quite power hungry considering the relatively low max RPM. In practice, however, I measured a max power draw of 1.8 W per fan, so take that for what you will. We see the fan uses a black ribbon-style cable that neatly comes out of a cutout in the frame and has an integrated daisy-chain connector to use with more of the same fans installed together as case fans or on a radiator. The fan otherwise terminates in a standard 4-pin PWM connector. Gamdias doesn't share details about the motor used here, but does inform us that the Notus M1-1201 uses a hydraulic bearing that should ideally present a good balance of longevity and smoother operation with no bearing noise. I will also mention the closed loop control system here that should help make these fans spin at the set RPM no matter the airflow restriction it is up against. Typically, fans spin faster in free air at the same PWM duty cycle compared to when they are up against an air cooler or a high fin density radiator, and getting around it is a feature typically seen in high-end fans.

There is no warranty information available for the fan, with other Gamdias products rated for one to two years of warranty, depending on where you purchased it from. If this is the case, it definitely should be increased to be in line with the fan market in 2026!
Nov 19th, 2026 15:27 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts