InWin P125 1250 W Power Supply Review 11

InWin P125 1250 W Power Supply Review

Fan Noise »

Efficiency

Using the results we gathered so far, we plotted a chart showing the PSU's efficiency at low loads and loads ranging from 10 to 110 percent of the maximum-rated capacity.




Efficiency is high with typical loads, but it could be better at light loads. That said, the unit exceeds 70% efficiency with 2% load despite its high capacity.

10%–110% Load Testing

These tests reveal the PSU's load regulation and efficiency levels under high ambient temperatures and show how the fan-speed profile behaves under harsh operating conditions.

Load Regulation & Efficiency Testing Data - In Win P125
Test12V5V3.3V5VSBPower
(DC/AC)
EfficiencyFan SpeedPSU NoiseTemp
(In/Out)
PF/AC
Volts
10%8.505A1.974A2.002A0.986A124.982W89.128%0 RPM<6.0 dB(A)43.78°C0.898
12.155V5.065V3.297V5.071V140.228W39.63°C230.25V
20%18.025A2.964A3.007A1.188A249.997W92.698%0 RPM<6.0 dB(A)45.24°C0.958
12.155V5.061V3.293V5.052V269.689W40.56°C230.24V
30%27.917A3.461A3.513A1.391A374.589W93.367%663 RPM17.7 dB(A)41.02°C0.977
12.127V5.056V3.288V5.034V401.199W45.98°C230.24V
40%37.861A3.959A4.019A1.594A499.761W93.477%664 RPM17.7 dB(A)41.82°C0.986
12.111V5.052V3.284V5.018V534.634W46.87°C230.24V
50%47.473A4.954A5.031A1.8A625.076W93.216%853 RPM25.2 dB(A)42.57°C0.993
12.103V5.047V3.28V5.001V670.568W48.1°C230.23V
60%57.029A5.95A6.046A2A749.591W92.782%1016 RPM30.4 dB(A)42.66°C0.995
12.096V5.043V3.275V4.982V807.908W49.01°C230.23V
70%66.666A6.949A7.064A2.217A874.908W92.242%1298 RPM37.4 dB(A)43.14°C0.996
12.088V5.038V3.271V4.963V948.491W50.51°C230.23V
80%76.305A7.95A8.083A2.325A999.726W91.692%1421 RPM39.3 dB(A)43.89°C0.997
12.081V5.033V3.266V4.948V1090.308W52.21°C230.23V
90%86.348A8.453A8.583A2.433A1125.152W91.099%1694 RPM43.5 dB(A)44.29°C0.997
12.075V5.029V3.262V4.933V1235.083W53.79°C230.23V
100%96.122A8.957A9.116A3.063A1249.986W90.503%1710 RPM44.2 dB(A)45.65°C0.997
12.071V5.026V3.258V4.898V1381.157W55.81°C230.22V
110%105.777A9.962A10.235A3.071A1374.585W89.848%1715 RPM44.2 dB(A)46.12°C0.997
12.066V5.021V3.253V4.884V1529.905W57.59°C230.22V
CL10.116A14.32A14.524A0A121.322W81.69%0 RPM<6.0 dB(A)47.99°C0.907
12.141V5.043V3.284V5.084V148.515W42.46°C230.25V
CL20.115A21.869A0A0A111.428W79.013%0 RPM<6.0 dB(A)47.46°C0.9
12.158V5.031V3.292V5.093V141.026W40.26°C230.25V
CL30.115A0A22.176A0A73.987W72.291%0 RPM<6.0 dB(A)48.54°C0.842
12.158V5.063V3.273V5.089V102.347W39.04°C230.24V
CL4103.464A0A0A0A1249.628W91.059%1618 RPM42.7 dB(A)44.08°C0.997
12.077V5.047V3.268V5.019V1372.333W55.23°C230.22V

The PSU managed to deliver the full load at nearly 46 °C without any issues. With 110% load, though, it couldn't operate for more than a minute without shutting down.

Light-Load Testing

In the following tests, we measure the PSU's efficiency at loads significantly lower than 10 percent of the maximum capacity—the lowest load the 80 PLUS standard measures. This is important for when a PC is idle with its power-saving features turned on.

Light Load Efficiency - In Win P125
Test12V5V3.3V5VSBPower
(DC/AC)
EfficiencyFan SpeedPSU NoiseTemp
(In/Out)
PF/AC
Volts
20W1.222A0.493A0.5A0.196A20.003W67.686%0 RPM<6.0 dB(A)39.18°C0.484
12.145V5.071V3.302V5.112V29.554W36.31°C230.24V
40W2.692A0.69A0.7A0.294A40.004W77.924%0 RPM<6.0 dB(A)39.89°C0.656
12.149V5.07V3.301V5.106V51.334W36.51°C230.24V
60W4.158A0.888A0.9A0.392A60.005W83.175%0 RPM<6.0 dB(A)41.59°C0.76
12.151V5.069V3.3V5.1V72.141W37.89°C230.24V
80W5.623A1.085A1.1A0.491A79.964W85.783%0 RPM<6.0 dB(A)42.21°C0.819
12.152V5.068V3.299V5.095V93.217W38.35°C230.24V

I would like to see close to 70% efficiency with 20 W load and close to 80% with 40 W.

Super Light-Load Testing

We measure the PSU's efficiency with a 10 W load if its maximum power is 500 W or less in the following tests. If the PSU is stronger, we apply 2% of its maximum-rated-capacity load.

Super-Light Load Efficiency - In Win P125
12V5V3.3V5VSBPower
(DC/AC)
EfficiencyFan SpeedPSU NoiseTemp
(In/Out)
PF/AC
Volts
1.880A0.261A0.261A0.054A25.265W70.086%0 RPM<6.0 dB(A)33.91°C0.883
12.129V5.069V3.302V5.122V36.049W29.64°C115.11V

The PSU manages to meet the strict ATX specification of more than 70% efficiency with 2% load.

5VSB Efficiency

5VSB Efficiency - In Win P125
Test #5VSBPower
(DC/AC)
EfficiencyPF/AC Volts
10.1A0.513W73.912%0.024
5.126V0.694W230.25V
20.25A1.281W79.270%0.056
5.121V1.616W230.25V
30.55A2.812W81.615%0.113
5.111V3.445W230.25V
41A5.096W82.133%0.185
5.095V6.205W230.25V
51.5A7.617W82.401%0.244
5.078V9.244W230.25V
63A15.077W81.418%0.344
5.025V18.518W230.24V


The 5VSB rail is highly efficient.

Power Consumption in Idle and Standby

Idle / Standby - In Win P125
Mode12V5V3.3V5VSBPower (AC)PF/AC Volts
Idle12.092V5.071V3.303V5.125V3.949W0.124
230.24V
Standby0.098W0.003
230.24V


Power consumption in standby is low.
Next Page »Fan Noise
View as single page
Nov 21st, 2026 12:52 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts