Disassembly and Teardown
The Gen 11 of the Yoga Pro 7i Aura Edition is a lightweight powerhouse packed with modern hardware and a great display but getting inside for servicing is surprisingly easy.
Nine Torx screws secure the bottom panel. You can start popping the plate loose from either the front or the back. In my experience, the easiest way is to insert a thin plastic prying tool around the end of the exhaust section to pop the nearest edge. From there, it's smooth sailing - just pry the rest of the panel step by step.
On the inside of the bottom cover, you'll find two thermal pads for the SSD slots; the larger one is for the main system drive.
Here we have the standard 84 Wh battery, though you can opt for a larger 92.5 Wh unit if you want extra runtime. To take the battery out, pull down the connector and undo the two screws at the top.
In our testing, a full charge is enough for nearly 8 hours of watching 4K YouTube videos - a solid result.
The memory is soldered, it's rare to find Panther-Lake units with upgradable memory. You can pick this notebook with up to 64 GB of LPDDR5X-8533 RAM.
The Wi-Fi 7 card is also not user-replaceable.
Storage-wise, you can rely on two M.2 slots, one 2242 for Gen 5 drives and one 2280 for Gen 4 units.
Here's a closer look at the system NVMe.
The cooling setup looks impressive for such a thin chassis. It features two fans, a pair of heat pipes shared between both chips, and a third pipe dedicated to the CPU. The setup also includes two top heatsinks and a massive central metal plate that covers the VRMs and VRAM.
To take out the cooling system, start by disconnecting the fans. The left fan's cable is a bit too short, so we'll deal with it later. For now, it's easier to unplug the speakers first to gain some slack. Three screws secure each fan housing, and yes, the fans can be pulled out individually.
Technically, the proper way is to remove them after pulling out the main thermal assembly, but I'll do it the other way around. The display cables are a bit in the way, but I'm going to leave them connected to keep things simple. Just keep in mind that these cables have a lot of physical tension, so take your time - especially on the right side. Once those are sorted, undo the four screws around each chip and the six captive screws securing the central cooling plate.
The heat pipe assembly lifts right off independently. That's a rare sight these days, but it's a clever design that makes repasting the chips a breeze.
Finally, the cooling is no longer attached to the chassis.
That's the top side of the thermal system.
As I mentioned earlier, the main cooling assembly is split into two parts.
We can take a look at the Panther Lake CPU and the RTX GPU.