Lexar NM1090 Pro 4 TB Review 25

Lexar NM1090 Pro 4 TB Review

Test Setup »

Packaging

Package Front
Package Back


The Drive

SSD Front
SSD Back

The drive is designed for the M.2 2280 form factor, which makes it 22 mm wide and 80 mm long.

SSD Interface Connector

PCI-Express 5.0 x4 is used as the host interface to the rest of the system, which doubles the theoretical bandwidth compared to PCIe 4.0 x4.

SSD Teardown PCB Front
SSD Teardown PCB Back

On the PCB you'll find the controller and four flash chips, a DRAM cache chip is included, too.


Lexar's sticker uses a white sticky tape that makes contact with the chips and has a shiny metal foil on top of that. This means less heat transfer, because heat has to travel through the white plastic adhesive first. The metal foil is also rather thin.

Chip Component Analysis

SSD Controller

The Silicon Motion Technology SM2508 controller is the company's first PCI-Express 5.0 controller for consumer applications. It supports PCIe 5.0 x4 and runs with eight flash channels at 3600 MT/s. SMI fabricates the controller using a 6 nanometer process at TSMC Taiwan.

SSD Flash Chips

The four flash chips are Micron B58R 232-layer 3D TLC NAND, they have been rebranded by Longsys, the parent company of Lexar. Each chip has a capacity of 1 TB.

SSD DRAM Chip

The DRAM cache chip, by Foresee, another Longsys brand, has a capacity of 4 GB and runs at LPDDR4-3733.
Next Page »Test Setup
View as single page
Nov 18th, 2026 15:49 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts