Lian Li Edge Platinum V2 1350 W Review 7

Lian Li Edge Platinum V2 1350 W Review

Internals »

The Power Supply


This is a solid heavy PSU with high precision. The stickers on the side are embossed and high quality, including a shiny finish to the brand and model text. On the right-hand side, there is a table listing the power specs, and a list of warnings and disclaimers. The Edge Hub ADV locks in satisfyingly to the front of the supply using magnets.


The rear grille is very open, and is only broken up by the power connector, main power switch that directly breaks the incoming AC, and a "start/stop" switch for selecting semi-passive operation.


The fan grille is held in place magnetically, and the surrounding tolerances are tight, so it doesn't shift about once firmly in place. There is a lovely stamped pattern to the grille, which reminds me of the HTC Touch Diamond.


With the grille removed, care needs to be taken as the internals are more exposed than in any other power supply. There are warnings and instructions about removing the grille as a result.
Also visible here is the status LED advising the user to clean the dust filter. This runs on a 360-hour fan run timer, at which time the LED will change from green to red, signifying that the filter should be cleaned. A little push button is located on the connector panel to reset the timer and LED.


The hub is a small plastic device that can be integrated into any system using any power supply. It offers USB and fan connections, and inputs for up to two GPU 12V-2x6 connector temperature sensors.


The benefit of using the hub with the Lian Li supply is how it slots neatly on to the main chassis with magnets, and without needing any additional power cable since it is supplied by the connector on the rear. The magnets in the hub can be used to mount it anywhere in a metal PC case.


The hub features are extensive for such a small device. Most importantly, the L-Connect 3 software can be used to monitor 12V-2x6 connector temperature, and notify, shut down, and email you if the connector temperature exceeds a set threshold. It also splits and monitors fans and USB devices, with the idea of simplifying routing of internal connectors from case screens, smart coolers, LED controllers and such.
Next Page »Internals
View as single page
Nov 16th, 2026 04:00 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts