LIAN LI UNI FAN SL INFINITY 120 Review - Infinite RGB! 23

LIAN LI UNI FAN SL INFINITY 120 Review - Infinite RGB!

(23 Comments) »

Introduction

Lian Li Logo

Lian Li went from being a brand with a combination of safe-but-boring or downright wacky case designs to a completely reinvigorated design and engineering team a couple of years ago, which has since been putting out very interesting products relevant to the PC DIY scene. Among these are of course several successful cases we've covered, but also RGB cables, PSUs, and even CPU coolers. Amidst all these, Lian Li was one of very few manufacturers to adopt daisy-chained fans via both short cables and integrated connectors, an example of which we saw with the Bitspower Njord Dual Fin, which was taken even further with the UNI Fan series from Lian Li. Today, we examine the latest and possibly greatest entry in the lineup, and thanks to Lian Li for providing TechPowerUp a review sample!


Lian Li is trying out the ALL CAPITAL LETTERS IS BETTER FOR MARKETING strategy with the full product name LIAN LI UNI FAN SL INFINITY 120. However, even the company itself is inconsistent in how this is carried out, so I am just going to refer to these as the Lian Li UNI Fan SL-INF 120 fans. These are an update to the UNI Fan SL 120 that adopt a modular connection and UNI fan hub to easily pair multiples together for easy hardware and software setup, with the "INF" now indicating an on-board infinity mirror lighting effect. The connectors have been tweaked to be even cleaner on the fan side, with further quality-of-life improvements everywhere, including on the software drivers supporting these fans for motor and LED control. We will go through all these today and test how the fans perform in our review which begins with a look at the product specifications in the table below.

Specifications

LIAN LI UNI FAN SL INFINITY 120
Dimensions:120 x 122.1 x 25 mm
Rated Speed:2100 RPM
Maximum Airflow:61.3 CFM (104.2 m³/h)
Noise:29 dBA
Static Pressure:2.66 mm H₂O
Fan Control:Near-proprietary fan connectors leading to 4-pin PWM and 3-pin ARGB control
Power Draw:5.16 W peak
Warranty:Two years

Packaging and Accessories


This is my first Lian Li product review, so I went in without knowing much, including on the unboxing front, which is where the size of the product box made it immediately obvious that a triple-pack of the UNI Fan SL-INF is inside. The design is well executed, adopting multiple colors to good effect, including for a render of the fans lit up on the front along with the company logo, product name, and salient marketing features. These fans are available in black or white, and I have the black set here, which is also confirmed on the box. More listed features are on the back along a handy list of contents and technical specifications, as well as a double flap on the top to keep the contents in place.


Opening the box, we see a bunch of cables along with a thank you card from Lian Li, which also prompts you to follow their social media channels. The cables are unlike anything I've seen, which might well be my inexperience with RGB-focused fans speaking, but Lian Li claims these are updated power module connector cables debuting with these fans. Even the 7-pin flat connector on the other end is going to require a different controller, practically making these proprietary compared to the typical 4-pin PWM and 3/4-pin LED cable seen these days. Underneath, we see an accessory box which holds the expected controller/hub and a few more cables.


There's a splitter cable adapter for the 7-pin connector from before, and we get to more familiar territory with a micro-USB to 9-pin internal USB 2.0 header cable and mini 4-pin to combo 4-pin PWM and 3-pin ARGB LED cable. These no doubt convert the 7-pin connector for more accessible control methods from a motherboard, and as we will see soon, the USB connection is for software control and hardware component monitoring to set up fan curves. The most critical part is the so-called Lian Li UNI Hub, which has been updated specifically for these fans to have four of those 7-pin female connectors in addition to two ARGB SM-type ports that can be used with other compatible Lian Li ARGB devices, such as their Galahad AIO coolers. There are hardware synchronization buttons for these too, and two full-size SATA connectors provide up to 29 W of power to the hub, with one SATA connector sufficient for this triple pack.

Next to these cables are the expected micro-USB and mini 4-pin ports. Those ordering a single fan SKU will get an adapter cable that bypasses the need for this hub controller, but still necessitates multiple connection adapters—this system only makes practical sense if you are fully invested in a Lian Li cooling system and have multiples of their fans. Unfortunately, there isn't much backwards compatibility with most other Lian Li RGB fans aside from those using the quick connect power module system, which leaves a question mark on the longevity of this approach, as there isn't a single universal solution yet and companies continue to update these connector types every few months.


The accessory box is next to the fans, but we are not done yet with Lian Li packing in even more accessories. This time, there are two separate user guides; one focuses on the software experience and the other guides you through the fan and cable connections. There is no mention of the 4-pin PWM cable, and I spotted some typos, too. Lian Li also includes three sets of four metal self-tapping screws to use these as case fans and replacement plastic strips that act as protectors for things we will talk about shortly. Not the best start for an undoubtedly complex system, but we now get to the fans which come individually packed in bubble wrap, with tape securing them for additional protection.
Our Patreon Silver Supporters can read articles in single-page format.
Nov 18th, 2026 16:27 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts