Disassembly
Unscrewing the six screws securing the bottom lid to the rest of the chassis was fairly simple, as was separating it from the top cover.
The assembly hidden beneath the lid is dominated by the large 80 Wh battery and the cooling setup, which features two thick heatpipes and two relatively large fans that direct air not only toward the heatsinks but also across the SSD, keeping it nice and cool. The M.2 2280 SSD sits in the center and is very easy to replace.
There's also a long ribbon cable connecting the two daughter boards that host the thumbsticks, d-pad, and face buttons. Lastly, attached to the bottom of the grips are two rumble motors.
The SSD found in the Claw 8 EX is a 1 TB Micron 2500. This is a PCIe 4.0 x4 NVMe drive powered by Phison's PS5027-E27T controller and featuring QLC flash. The SSD doesn't include DRAM but supports HMB.
You've got a single 232-layer QLC NAND chip made by Micron. While having QLC flash is less than ideal, the Micron 2500 is a quite performant SSD, as you'll see later in our storage performance section.