MSI MPG 322UR QD-OLED X24 Review - Less Expensive and Even Better 34

MSI MPG 322UR QD-OLED X24 Review - Less Expensive and Even Better

Value & Conclusion »

Gaming Performance

The MSI MPG 322UR QD-OLED X24 features a 240 Hz, fourth-generation QD-OLED panel. Adaptive synchronization is supported on all modern GPUs and works within the 48-240 Hz range.

Response Time and Overdrive

I tested the response time with the Open Source Response Time Tool Pro (OSRTT Pro), developed by Andrew McDonald of TechTeamGB. It's a nifty tool that, combined with the OSRTT Launcher app, measures panel response times and presents them through detailed graphs and easy-to-read heatmaps. You can find everything you might want to know about the OSRTT in its technical documentation and on the official website, where you can order your unit, too. The OSRTT Launcher gives us three interesting heat maps to observe.

Perceived Response Time tells us how much time the panel took to transition from one color to another. This measurement is expressed in milliseconds and includes overshoot. In other words, if the panel exceeded the target value, the perceived response time also includes the time it took for the transition to recover from overshoot and stabilize on the target value. I'm running my tests with recommended settings, so with a fixed RGB 5 tolerance level and with gamma-corrected RGB values.

RGB Overshoot tells us how much a specific transition missed the target value. For example, if the panel was transitioning from RGB 51 to RGB 204 and it initially landed on RGB 212, the overshoot RGB value is 8. Overshoot can be both positive and negative, and it commonly occurs at extreme overdrive settings when pixels are driven by high voltage. In practice, an overshoot manifests as an afterimage or a halo around a moving object. It can be easily spotted even when doing something as basic as scrolling through a webpage.

Visual Response Rating is the most abstract heatmap generated by the OSRTT Launcher; in essence, it's an ever-evolving scoring system. To quote OSRTT's technical documentation, it is a finite score rather than a direct measurement. The calculation is pretty simple; it's: "100 - (Initial Response Time + Perceived Response Time)". Since both metrics use the same tolerance level, if a display doesn't overshoot, both times will be identical. This essentially rewards displays that are fast with a small amount of overshoot over displays that aren't as fast even if they don't overshoot at all, while still overall preferring ultra-fast, accurate monitors.

Here's how the MSI MPG 322UR QD-OLED X24 fares in the pixel response time test.


The results confirm that the fourth-generation QD-OLED panel matches the pixel response performance of its predecessor. The average perceived response time comes in at 1.26 ms, with the average complete time at 1.76 ms. Rise and fall are well-balanced, averaging 1.21 ms for rising transitions and 1.32 ms for falling transitions. The full 0 to 255 and 255 to 0 swings land at 1.5 ms, comfortably inside the 4.17 ms refresh window at 240 Hz. About 86.67% of transitions finish within the frame time, with the remaining handful only slightly exceeding the window. Even the slowest measured transition at 5.2 ms is still very fast by any standard.

In real use, motion clarity is outstanding at 240 Hz. The panel easily keeps up with the refresh rate, blur is dominated by eye tracking rather than pixel response, and there are no distracting overshoot trails. These are top-tier response results for any display.

The monitor offers an MPRT mode (Gaming Features > MPRT > ON). MPRT mode uses black frame insertion to cut motion persistence, which can sharpen moving objects by reducing sample and hold blur. Enabling MPRT disables adaptive synchronization and drops SDR brightness to about 125 cd/m², which makes HDR unusable and SDR look fairly flat in anything but a dark room. Given how fast the panel already is at 240 Hz, the benefit is marginal while the brightness penalty is severe. I would not use MPRT on this monitor, nor recommend it for most users.

Input Lag

To measure the input lag of a monitor, I switched from using the LDAT V2 (Latency Display Analysis Tool), which I've covered extensively in my NVIDIA Reflex review, to the OSRTT Pro Tool. The OSRTT Pro Tool and the accompanying software include a DirectX code developed by Andrew McDonald of TechTeamGB, which allows the OSRTT Launcher to track the events and capture the frame time, making it possible to isolate the monitor latency from other factors that come into play when using the click-to-photon testing methodology, namely the USB polling rate and game render time. For a deeper insight, I suggest you watch an excellent overview video made by Andy himself.

Here's how the MSI MPG 322UR QD-OLED X24 holds up in terms of input lag after doing 100 iterations of the input lag test.


The input lag is very low. The chart shows an average on-display lag of about 5.85 ms, with the fastest sample at roughly 3.6 ms and the slowest at about 8.15 ms. This represents the time the monitor needs after receiving a fully rendered frame to actually show it, excluding USB polling and game engine render time. For a 240 Hz panel, one full frame interval is 4.17 ms, so the measured average corresponds to roughly 1.4 frame times of delay, which is very good for a gaming display and effectively imperceptible in practice. The results are nearly identical to the MPG 322URX that preceded it, confirming that the new panel generation does not introduce any additional processing latency. Competitive players will appreciate that the display is not adding meaningful latency on top of the rendering pipeline.
Next Page »Value & Conclusion
View as single page
Nov 20th, 2026 15:21 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts