- The MSI MPG CORELIQUID P13 360 has a MSRP of $189.99.
- Excellent performance on Intel CPUs
- Perfect memory and GPU clearance
- Fans have a wide RPM range
- Quiet below 75% PWM settings
- Good build quality
- Simple yet visually pleasing design
- No wire mess with daisy-chained fans
- ARGB lighting is aesthetically well done
- IPS display was vibrant and crisp
- Performance on AMD was average at best
- Outperformed by better value options that lack displays
- ARGB lighting and display won't appeal to everyone
- Three year warranty while not bad is lacking compared to the competition
- No manual in the box
- Requires additional software for full customization
Performance
The MSI MPG CORELIQUID P13 360 is a cooler that certainly catches the eye if you're a fan of ARGB lighting and pump-mounted displays. However, it seems that MSI prioritized aesthetics over performance with this model in some respects. While it does perform adequately as a 360 mm all-in-one liquid cooler, the results are inconsistent across different platforms. On the AMD side, it tends to land in the middle or even towards the back of the pack, depending on the test. At maximum RPM, it lags significantly behind most other 360 mm options. However, when tested at 45 dBA, it manages to regain some ground, climbing the charts slightly. Despite this, it still trails behind most AIOs with displays. Competitors like the CPS PCCOOLER DT360, Gamdias Chione P5 360, and Lian Li HydroShift II LCD-C 360 TL offer superior performance on the AMD AM5 platform.
The Intel test bench really highlights the strengths of the MPG CORELIQUID P13 360. It excels in both maximum performance and noise-normalized scenarios, outperforming nearly all other AIOs with displays. While it doesn't quite clinch the top spot for pure performance, its design seems particularly well-suited for Intel systems. Achieving a design that excels on both AMD and Intel platforms is a tough challenge, but it is possible, as the alternatives noted above have shown. Nevertheless, MSI's cooler stands out on Intel setups, making it a solid choice for anyone building an Intel-based system who must have an AIO with a built-in display.
Noise
In terms of overall noise output, like most AIOs the MPG CORELIQUID P13 is loud at max RPM, however, it remains far quieter than much of the competition as it tops out at 53 dB, which is 2-8 dBA quieter compared to most of the similarly equipped coolers. MSI focused their fans on performance while keeping noise in check, and it shows. What the unit lacked in max RPM cooling potential it makes up for with a more pleasant overall noise profile. The pump was barely audible with no gurgling or otherwise notable sounds and the fans had a smooth PWM curve that resulted in noise slowly increasing as fan speed is increased, but with no noticeable spikes or odd tonal shifts, which is always a plus.
Build Quality
The build quality is generally solid, with only a few minor annoyances to note. One potential issue is the pump mounting bracket, which might not be fully seated for some users, though our sample was perfectly fine. This doesn't pose a problem if you take the time to double-check during installation. If MSI included the bracket in the accessories box rather than having it pre-installed it may avoid some potential minor drama. Regardless, it's always a good idea to inspect any cooler before installation, just like you would remove the protective film from the copper cold plate, it's wise to check the bracket if it's pre-installed. The only other real complaint is the sticky residue left by the film on the cold plate, but it's easily noticeable during the initial inspection and can be cleaned off quickly with a bit of isopropyl alcohol.
Outside those minor issues, the fit and finish of the radiator, fans, and pump was all good. The ARGB lighting, while not for everyone, was in-line with expectations and the IPS display was bright and crisp. Features like the daisy-chained fans keep cable clutter in check and the overall looks are not only pleasing but well-thought-out from a design perspective. Much like its sibling the MAG CORELIQUID A15, the radiator's textured finish did not attract fingerprints and its matte design gave it a clean look overall.
Other Thoughts
The software side of things is functional, but it doesn't offer as many built-in options as some other brands. However, you can still upload your own video files if that's your preference. The real head-scratcher here is the extended display function. It allows you to use the small 2.1-inch 480 x 480 IPS display as a secondary monitor. While it's an intriguing idea, it falls short in execution. MSI deserves some credit for trying something different, but this feature would have been more practical with a larger screen.
When it comes to the warranty, the three-year coverage feels just adequate. Many competitors are stepping up with more generous warranties, and for a top-tier manufacturer like MSI, this shorter warranty is a bit of a letdown. Take the Gamdias Chione P5 360, for instance—it's more affordable, comes with a five-year warranty, and offers similar functionality. In a market crowded with strong contenders, this MSI product, while not bad, seems to struggle to stand out.
Wrapping things up, the MSI MPG CORELIQUID P13 360 is a solid choice for anyone seeking an AIO cooler with a pump mounted display. When paired with an Intel-based system, it proves to be a compelling option with a fitting blend of performance and aesthetics. The noise levels are also noticeably quieter compared to many others on the market. However, its cooling performance on AMD systems leaves something to be desired, and the shorter warranty period is a general downside. These factors prevent it from being a universally recommended option, but it's definitely worth considering for Intel users.