Ocypus Sigma L36 BK ARGB Review 0

Ocypus Sigma L36 BK ARGB Review

Installation »

A Closer Look


The radiator hasn't changed really, it sticks to the same style as most all-in-one liquid coolers. It is made of aluminium and features the Ocypus logo on the side, adding a subtle visual touch. Other than that, it's your typical boxy 360 mm radiator. The fittings are a deep gray, and the tubing is covered with a braided sleeve to enhance the overall look. I measured the radiator's FPI (fins-per-inch) at 20, which is consistent with most liquid coolers, as the usual range is 20-21 FPI. This suggests that its heat dissipation performance should be comparable to most other options, with coolant flow and fan performance being the deciding factor. The tubing length is specified at 400 mm, and my own measurements confirm that.


The pump-mounted display is quite different compared to other competing options. It features a circular housing with a built-in ARGB ring for more illumination thus adding some extra visual flair, while the 2.4" IPS display remains the main focal point. Ocypus uses four magnets to keep it in place. Looking at the pump itself, the wiring exits between the inlet and outlet ports but sits low enough that it won't impact the swivel fittings' overall range. Finally, the copper base is slightly convex with some visible machining marks but is otherwise smooth to the touch.


The design of Ocypus fans stands out with its unique visual elements, featuring rounded corners on the frame that soften the typically hard, boxy lines. The center hub, adorned with the orange "O" from Ocypus, adds a more appealing touch compared to the usual stickers, which can look terrible when misaligned. As for performance, the Ocypus Sigma L36 BK ARGB fans come with a PWM RPM range of 500-2000 and a maximum CFM of 73.
Next Page »Installation
View as single page
Nov 20th, 2026 13:47 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts