Patriot Viper Elite 5 Ultra RGB DDR5-6000 96 GB CL28 Review 27

Patriot Viper Elite 5 Ultra RGB DDR5-6000 96 GB CL28 Review

Intel Memory Overclocking »

Performance Check 24 Gbit vs 16 Gbit

After reviewing the full suite of benchmarks for both AMD and Intel systems, there is noticeable "underperformance" at 1920 × 1080 resolution compared to other memory kits in the charts. For those seeking a quick answer: the primary reason is that the 24 Gbit die (3 GB) is 50% larger than the 16 Gbit die (2 GB). To accommodate this increase in size, the tRFC2 and tRFC-SB values must be adjusted upwards to follow JEDEC standards for system stability. In our pursuit of delivering honest and fair reviews, we must also consider the possibility of a testing error. We have this page as a detailed explanation of how we test for that and arrived at our conclusion in the following section.

To ensure that our findings are accurate, we first conducted a series of system checks and benchmarks for an A/B comparison with a previously tested DDR5-6000 memory kit. This meticulous approach allowed us to rule out any test system errors or faulty data. Occasionally, the pre-set values in the XMP/EXPO profiles may be incorrectly processed by the motherboard when swapping memory but not performing a BIOS Reset, that can lead to instances of instability or suboptimal performance. That is not the case here. To be clear, there is nothing technically wrong with this Patriot memory kit. Moreover, these same longer refresh cycles for 3 GB ICs are used with other many brands as well.

To explain what is happening, we will dive into a breakdown of tRFC2 and tRFC-SB. These tRFC2 and tRFC-SB values in their simplest description, determine in clock cycles the time that must elapse during a refresh cycle of the memory cells. Essentially, the DRAM cannot be accessed while the refresh of memory cells is ongoing. With tRFC-SB being used for the "Same Bank" refresh, in which the same rules apply. In short, the higher these values are, the "longer" time (clock cycles) memory cells are spent inaccessible to the system. This interrupt must happen due to the physical properties of the memory cells. Also known as volatile storage, it will lose the data in the event of power loss. If not periodically refreshed the data bits can be become corrupted. However, if these tRFC values are set too low, the memory doesn't have enough time to fully refresh all the banks, resulting in data loss and eventual system instability.

This isn't the first time coming across atypical results and the performance "fix" for 24/48 GB DIMMs is quite simple; manually set the tRFC2 and tRFC-SB values to match 16 Gbit dies. For comparison, 16 Gbit die (2 GB) running at 6000 MT/s will use tRFC2 480 (160 ns) and tRFC-SB 390 (130 ns). Patriot kept the adjustment below 50% at 660-570 (220-190), representing a 37.5–46.2% increase to clock cycles spent cell refreshing. Unfortunately for the high performance PC enthusiasts, this is a not so small trade-off. Using 24 GB DIMMs comes at the cost of increased refresh latency, which can impact overall performance for fast reflex gaming. Without manually setting these tRFC values, there is a clear regression in performance of brands using 24 GB DIMMs compared to their 16 GB counterparts set inside the XMP/EXPO profile. As stated previously, the reason for these higher refresh times is because of the larger size ICs. By following specifications set by either the DRAM manufacturer (SK hynix in this example) or the JEDEC organization, most of the EXPO/XMP profiles are generally designed (programmed) using a linear progression model and scaling approach. In short, Patriot is following the correct specifications. However, when directly compared to 16 GB DIMMs, it comes across as atypical results.

We adjusted the tRFC2 from 660 to 480 and the tRFC-SB from 570 to 390 to see how these changes impact system behavior. Additionally, we tested the setup with the 200S Boost enabled, without modifying the tRFC values, to provide a comprehensive comparison. All tests were conducted without altering the voltage or any other memory timings, ensuring that the results are solely due to the changes in tRFC2 and tRFC-SB. This approach allows us to isolate the impact of these specific adjustments and better understand their influence on overall performance.

Counter-Strike 2 Results







Baldur's Gate 3





Next Page »Intel Memory Overclocking
View as single page
Nov 20th, 2026 17:03 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts