Positioning & Architecture
It has been almost three months now since NVIDIA launched their GeForce RTX 5070 Ti, which was the company's third GPU launch this year. Since then, NVIDIA has also launched the RTX 5070 non-Ti, and the pair of RTX 5060 Ti variants. AMD didn't sit idle either and unveiled their RDNA 4-based Radeon RX 9070 XT and RX 9070 non-XT. Just like the RTX 5080, the RTX 5070 Ti is based on NVIDIA's GB203 silicon, which is the second-largest consumer Blackwell chip in their arsenal. While the RTX 5080 came with all cores enabled (10752), the RTX 5070 Ti has 8960 of them active, a 20% difference. Other unit counts have been adjusted accordingly, you get 96 ROPs, 280 TMUs and 70 RT cores vs 128/336/84 on the RTX 5080. The memory subsystem is identical, the RTX 5070 Ti uses the same 256-bit 16 GB GDDR7 memory configuration, just the clock frequency is a little bit lower: 28 Gbps vs 30 Gbps.
The Blackwell architecture introduces several architectural improvements under the hood, like giving all shaders the ability to run FP32 or INT32 instructions, on Ada only half the cores had that ability. The Tensor Cores are now accessible from the shaders through a new Microsoft DirectX API, and they now support FP4 and INT4 instructions which run at lower precision, but much faster with less memory usage. There's numerous additional architecture improvements, we talked about all of them on the first pages of this review.
From a fabrication perspective nothing has changed though—Blackwell is built on the same 5 nanometer "NVIDIA 4N" TSMC node as last generation's Ada. NVIDIA claims this is a "4 nanometer process," but during Ada it was confirmed that NVIDIA 4N is actually not TSMC N4 (note the order of N and 4), but 5 nanometer. At the end of the day the actual number doesn't matter much, what's important is that NVIDIA is using the same process node.
Performance
Since the original RTX 5070 Ti reviews we've upgraded our test system with new games and drivers. We're still using the outstanding Ryzen 7 9800X3D of course. At 4K resolution, with pure rasterization, without ray tracing or DLSS, we measured a 27% performance uplift over the RTX 4070 Ti, which is pretty good for a gen-over-gen improvement. While it's not as big as the RTX 5090, which is 32% faster than the RTX 4090, it's definitely better than the 15% that we got on RTX 5080. Just like with RTX 5090, NVIDIA achieves their "twice the performance every second generation" rule: the RTX 5070 Ti is twice as fast as the RTX 3070 Ti. This means the card matches performance of the RTX 4080 and RTX 4080 Super, and it's also able to match last-generation's AMD's Radeon RX 7900 XTX flagship. Impressive—NVIDIA's 3rd card in the lineup competes with AMD's #1. This is with pure rasterization—once you turn on ray tracing, the 5070 Ti pulls far away. AMD's new Radeon RX 9070-series can't reach the 5070 Ti either—the XT is 5% slower, and the non-XT is 15% behind.
While RTX 5070 Ti is a very decent card for gaming at 4K, it's not a fire-and-forget solution. There are several titles that run at less than 60 FPS when maxed out (without RT and upscaling). I'd say RTX 5080 is a better choice for demanding 4K gaming, but considering the price differences, I think lowering details slightly or using upscaling / frame generation is a very reasonable approach. For 1440p, the RTX 5070 Ti is awesome, here it can achieve excellent frame rates and will be able to drive high-refresh-rate displays very well.
Ray Tracing & Neural Rendering
NVIDIA is betting on ray tracing and Blackwell comes with several improvements here. When comparing the RTX 4070 Ti with the RTX 5070 Ti, we see a really nice +59% performance uplift. One of the reasons for that is that the 5070 Ti comes with 16 GB, whereas the RTX 4070 Ti had only 12 GB. Interestingly, against RTX 4070 Ti Super, which has 16 GB, too, the RT performance delta is just 14%. In the comparison against AMD Radeon, the 5070 Ti makes short shrift of the RX 7900 XTX, beating it by 30%. With RDNA 4, AMD has put in some extra love for the RT cores, which definitely makes a difference. The RX 9070 XT is 10% behind the 5070 Ti, which definitely isn't the huge gap that we saw previously. With Blackwell, NVIDIA is introducing several new technologies. The most interesting one is Neural Rendering, which is exposed through a Microsoft DirectX API (Cooperative Vectors). This ensures that the feature is universally available for all GPU vendors to implement, so game developers should be highly motivated to pick it up.
VRAM
While the RTX 4070 Ti came with 12 GB VRAM, which ended up a bit limiting in some titles, the RTX 4070 Ti Super bumped that to 16 GB. The RTX 5070 Ti retains that 16 GB framebuffer size, and it makes a lot of sense in this segment. Increasing the memory size further would have required a wider memory bus and a GPU design with support for the extra bus width and more pins in the design, etc. All these changes would make the card more expensive, for relatively small gains. More memory does not automagically turn into additional performance. You will see scaling only in titles that go beyond 16 GB in this case—which is extremely rare, and usually a sign of developer fail. Video games are developed for consoles first these days, and their hardware sets the bounds for what we can expect from VRAM usage on PC, too.
DLSS 4 Upscaling & Frame Generation
NVIDIA made a big marketing push to tell everyone how awesome DLSS 4 is, and they are not wrong. First of all, DLSS 4 Multi-Frame-Generation. While DLSS 3 doubled the framerates by generating a single new frame, DLSS 4 can now triple or quadruple the frame count. In our testing this worked very well and delivered the expected FPS rates. Using FG, gaming latency does NOT scale linearly with FPS, but given a base FPS of like 40 or 50, DLSS x4 works great to achieve the smoothness of over 150 FPS, with similar latency than you started out with. Image quality is good, if you know what to look for you can see some halos around the player, but that's nothing you'd notice in actual gameplay.
Want lower latency? Then turn on DLSS 4 Upscaling, which lowers the render resolution and scales up the native frame. In the past there were a lot of debates whether DLSS upscaling image quality is good enough, some people even claimed "better than native"—I strongly disagree with that—I'm one of the people who are allergic to DLSS 3 upscaling, even at "quality." With Blackwell, NVIDIA is introducing a "Transformer" upscaling model for DLSS, which is a major improvement over the previous "CNN" model. I tested Transformer and I'm in love. The image quality is so good, "Quality" looks like native, sometimes better. There is no more flickering or low-res smeared out textures on the horizon. Thin wires are crystal clear, even at sub-4K resolution! You really have to see it for yourself to appreciate it, it's almost like magic. The best thing? DLSS Transformer is available not only on GeForce 50, but uses Tensor Cores on all GeForce RTX cards! While it comes with a roughly 10% performance hit compared to CNN, I would never go back to CNN. NVIDIA has constantly been improving the list of supported DLSS 4 games, it's at over 100 now, most through NVIDIA App overrides, and many more are individually tested, to ensure best results. NVIDIA is putting extra focus on ensuring that there will be no anti-cheat drama when using the overrides.
AMD's RDNA 4 generation of GPUs introduces an AI-based FSR 4 upscaling algorithm, which looks very good, slightly worse than DLSS Transformer, but I'd call it "close enough," which means the differences when it comes to the quality of upscaling aren't that massive anymore, they still lack multi-frame-generation though.
Physical Design, Heat & Noise
PNY's new GeForce 50-series design for the Epic-X lineup looks fantastic, they combined black surfaces of various textures and added a great-looking RGB implementation. I really like the rough matte backplate, which makes the product feel very high-class. In our thermal testing, the card's cooling solution impresses. With just 26 dBA, the card runs whisper-quiet, even at full load in 4K—very impressive. Temperatures are very low at the same time, barely hitting 60°C. We've tested eight RTX 5070 Ti models, and the PNY Epic-X is definitely one of the quietest options, but some are even quieter, like the MSI Vanguard and Gaming Trio. While some vendors use a dual BIOS setup, so that you have to manually activate the quiet mode, the PNY card comes with the perfect settings right out of the box—no need for a quiet BIOS.
Our apples-to-apples cooler comparison test reveals that PNY's cooler is the third strongest of the models we've tested, beating the famous MSI Gaming Trio, ASUS TUF, right behind Palit GameRock and MSI Vanguard.
PCI-Express 5.0
NVIDIA's GeForce Blackwell graphics cards are the first high-end consumer models to support PCI-Express 5.0. This increases the available PCIe bandwidth to the GPU, yielding a small performance benefit. Of course PCIe Gen 5 is backwards compatible with older versions, so you'll be able to run the RTX 5070 Ti even in an older computer.
Just like we've done over the years, we took a detailed look at
PCI-Express scaling in a separate article. Testing includes x8 Gen 5, for instances when an SSD is eating some lanes. The popular x16 4.0 was tested, which is common on many older CPUs and entry-level motherboards. Finally, some additional combinations were run, down to PCIe x16 1.1. The results confirm that unless you are on an ancient machine, PCIe bandwidth won't be a problem at all.
Power Consumption
Just like other Blackwell cards, the idle, multi-monitor and media playback power consumption of RTX 5070 Ti is higher than expected. Compared to the RTX 4070 Ti, the increase is +50%, against the RTX 4070 Ti Super it's still twice +13%—not good. Since we saw similar increases on other new cards, I hope this is a bug that NVIDIA can fix. Especially if you run your PC for many hours a day without gaming, then this increase can add up, even more so when you multiply it by a few million, which is how many units NVIDIA plans to ship of these cards. In contrast, the gaming efficiency is excellent. PNY's card stands out here reaching the top spot in our energy-efficiency chart, beating even the RTX 5080. The secret sauce is that PNY's card is running at a fairly low voltage of just 1.0 V, while other cards run at 1.05 V or higher. This not only saves power, but it also lowers the heat output, which means the cooler and fans won't have as hard to get rid of the heat. NVIDIA is using the same process for Blackwell as for Ada, so there are no process-related power improvements here. With around 300 W for the graphics card alone, PSU requirements are nothing to worry about.
Although the card operates at NVIDIA's standard 300 W power limit, PNY provides an option to increase this limit to 330 W, a small increase over the 320 W limit offered by most other cards.
Overclocking
Overclocking worked extremely well on all RTX 5070 Ti cards, with most of them reaching more than +10% in real-life performance. This is quite unexpected, especially for NVIDIA, who are usually the masters at eking the last bits of performance out of their GPUs, even at stock. Going from a real measured clock frequency of ~2800 MHz to ~3200 MHz is massive—why didn't they clock these cards higher? Memory overclocking is equally impressive and topped out at NVIDIA's artificial cap of +375 MHz / +6000 MT/s—the chips could certainly take more.
Pricing & Alternatives
NVIDIA's MSRP for the RTX 5070 Ti Series is $750, which is very reasonable for the performance you're getting. Actually, this MSRP is $50 lower than the $800 price point that both the 4070 Ti and 4070 Ti Super launched at. There has been lots of controversy about fake MSRPs, and this launch has been no exception. When sales went live, there was only a tiny number of cards available at MSRP, and most cards were listed much higher. Still, they all sold out and right now there isn't a single RTX 5070 Ti card available in the States, or any other 2025 graphics card. Scalpers want $1100 for the PNY Epic-X RGB Plus card. Things look much better in Europe—here everything is in stock, even from reputable retailers. The card is currently listed for €1000, including 20% VAT, which converts to $925 without tax—still a lot of money. The most affordable RTX 5070 Ti goes for €830 (= $771), so nothing is available at MSRP either in Europe, but it's pretty close. These numbers suggest that PNY is charging something like $150 extra for their card—no way that's justified. While you do get fantastic build quality, great RGB and an amazingly quiet cooler in return, I'm not convinced—the price increase is just too high.
There really isn't any alternative to the 5070 Ti in this segment, and NVIDIA knows that, and they designed the card with that in mind. No reason to give you +50% of anything if there's no competing product. AMD's current-gen flagship, the RX 9070 XT currently sells for the equivalent of $710 in Europe—definitely an option if you can live with a bit lower performance and lack of MFG. Last-gen Radeon RX 7900 XTX could be an option, especially if you find it used at a good price and ray tracing performance is not a priority for you. The RTX 4080 and 4080 Super are priced well over $1000 these days—no reason to buy them unless they are heavily discounted and end up below 5070 Ti pricing. What else is there? RTX 4090? Super expensive because people buy them for AI. RTX 5080 and 5090? Sold out, scalped to several thousand dollars. On top of that, the whole tariff situation is bound to push GPU prices even higher, so it's certainly not the best time to buy a new graphics card.