Positioning & Architecture
AMD's Radeon RX 9070-series has been on the market for a bit over six months now, with very positive reactions. The new GPUs are designed to sit at strategically important price points, that are mass-market compatible—there is no high-end model that competes with the RTX 5090, for example. Both the Radeon RX 9070 and RX 9070 XT are based on the Navi 48 graphics processor, which introduces the company's new RDNA 4 graphics architecture. Compared to RDNA 3 there has been an increased focus on ray tracing performance. The Compute Units have undergone enhancements to boost their performance, and the machine learning cores have been upgraded, too, one highlight is support for the FP8 data type. While NVIDIA has switched to GDDR7 memory for Blackwell, AMD continues to use GDDR6 memory, same as on last generation. The RX 9070 XT comes with 4096 GPU cores, the RX 9070 non-XT has 3584 (a 13% difference). Both cards feature 256-bit 16 GB VRAM and 128 ROPs, the number of RT cores is 64 and 56 respectively. As fabrication process, AMD is using TSMC's 4 nanometer node, while Blackwell is still on the same 5 nm process as Ada.
Performance
For this round of RX 9070 XT reviews, I've retested all RDNA 4 cards on the newest drivers from this month. The rest of our test system is unchanged. Averaged over all our games, without ray tracing or upscaling, the RX 9070 XT Reva is around 1% faster than the baseline RX 9070 XT, thanks to a small factory overclock. Against NVIDIA's GeForce RTX 5070 Ti, the RX 9070 XT is close behind by a small 5%. Versus the RTX 5070, the lead is around 10%. Relative to last generation's flagship, the RX 7900 XTX, the 9070 XT is still around 5% behind, but the more meaningful matchup is the RX 7900 GRE, which represents a more realistic gen-over-gen look. Here we see a 28% performance uplift, which isn't monumental but certainly decent. At 4K, the increase is 31%, which is considerably better than what NVIDIA is offering with most GeForce RTX 50-series models. The card also lands roughly midway between the RTX 4070 Ti Super and RTX 4080—better positioning than most people expected.
While most titles will run well at 4K, I think RX 9070 XT should be considered a fantastic card for 1440p gaming that has enough horsepower to explore gaming at 4K, possibly with upscaling or slightly lowered settings.
The factory overclocked Reva isn't clocked as high as other custom designs that we've tested, so it's only a small bit faster. We've seen up to 3% from the best cards, which might be 3x as much, but is really no different, no way that you'll be able to subjectively notice an additional frame per second.
Ray Tracing
While NVIDIA has been a pioneer when it comes to the introduction of ray tracing technology, AMD hasn't really been pushing things here. This changes with RDNA 4. The new GPU is considerably faster at ray tracing, which fixes one of the biggest drawbacks of RDNA 3. In our newest test suite, the gap between the RTX 5070 Ti and the RX 9070 XT is only 5% at 1440p with RT, without RT it's 4%, so almost the same, which means that AMD has pretty much caught up. Compared to the RTX 5070, the 9070 XT is 20% faster, more at 4K, because it has 16 GB VRAM, while the 5070 has only 12 GB. Against RDNA 3, the performance gains are impressive: +51% vs RX 7900 GRE, +12% vs RX 7900 XTX. Good job, AMD!
VRAM
AMD has equipped both RX 9070 and RX 9070 XT with 16 GB of VRAM, which is the right memory size in this segment. NVIDIA's RTX 5070 Ti has 16 GB, too, but the RTX 5070 non-Ti has only 12 GB, which becomes an issue in some titles at 4K with ray tracing and frame generation enabled. Also, looking ahead, I am convinced that future titles will come with higher VRAM requirements, which means you'll have to dial settings down a bit on the GeForce RTX 5070 (which isn't unreasonable). Still, 16 GB gives you peace of mind when it comes to VRAM.
FSR 4
With RDNA 4, AMD is introducing FSR 4—the newest version of their upscaling technology. The new tech is supported in a good number of games already, and it will come to all games supporting FSR 3.1 through a driver override mechanism. In my testing this worked well, and the UI is easy to use. I like how the in-game overlay tells you when FSR 4 is active, or warns you when you forgot to enable FSR 3.1 in the game. Image quality is greatly improved, the image stability is fantastic, almost on par with DLSS Transformer, which still remains the better option though. Rendered details in textures are much better now, too, and FSR 4 in Quality mode is comparable to native, sometimes better. Just to clarify, AMD has not made any improvements to frame generation, you still get the option to double your framerate. With Blackwell, NVIDIA has introduced multi-frame generation. This feature allows you to triple or quadruple the framerate with good results. Thus, NVIDIA still possesses a superior capability when it comes to upscaling and frame generation. However, this advantage has become much smaller. I believe the main challenge for both vendors now will be game support.
Early next month, AMD will launch their FSR Redstone update, which should bring various improvements, like neural radiance caching, ML-based Ray Regeneration, and ML-based Frame Generation.
Physical Design, Heat & Noise
With Reva, PowerColor is introducing a completely new card design and cooler shroud. While the card is still part of the "Hellhound" family (not "Red Devil"), the experience is definitely premium. While the anime girl is debatable, the build quality is impeccable and reminds me of much more premium models. All surfaces have a very nice touch to them, thanks to a non-glossy texture with a little bit of roughness that feels premium to the touch. The metal backplate is of excellent quality, too, and PowerColor's RGB light effects look excellent, covering both the top edge of the card and the backplate. I also like that you get a dedicated, physical, switch to disable all lighting, no software installation required.
Noise levels are impressive—with just 24 dBA, the card is the quietest RX 9070 XT that we've tested. Generally, most RX 9070 XT cards run fairly quiet, but the PowerColor Reva sets a new record. There's an optional "quiet" BIOS. We found that that makes only a small difference in noise levels during warm up, but eventually, both BIOSes end up running at roughly the same RPM and noise level. The fan curve could be a bit more optimized though, it starts too aggressive and does tend to go into oscillation in the first few minutes of gaming, which means the changing fan RPM is a bit more noticeable. Overall, still an excellent showing of the PowerColor Reva.
Our apples-to-apples noise normalized cooler comparison test shows that the PowerColor cooling solution is a bit on the weaker side, but the differences are small, and what matters much more is the fan curve tuning and resulting noise level.
PCI-Express 5.0
Just like NVIDIA Blackwell, AMD RDNA 4 has support for PCI-Express 5.0. This increases the available PCIe bandwidth to the GPU, yielding a small performance benefit. Of course PCIe Gen 5 is backwards compatible with older versions, so you'll be able to run the cards even in an older computer.
Just like we've done over the years, we took a detailed look at
PCI-Express scaling in a separate article, using GeForce RTX 5090. I don't expect that results for AMD will be vastly different, so the data should be a good indicator of what to expect. Testing includes x8 Gen 5, for instances when an SSD is eating some lanes. The popular x16 4.0 was tested, which is common on many older CPUs and entry-level motherboards. Finally, some additional combinations were run, down to PCIe x16 1.1. The results confirm that unless you are on an ancient machine, PCIe bandwidth won't be a problem at all.
Power Consumption
The biggest news here for me is that AMD has finally fixed the increased power consumption in multi-monitor and video playback. In an unexpected reversal, NVIDIA is failing here now, with their top three Blackwell GPUs showing higher than expected power consumption in non-gaming states. Still, when it comes to gaming efficiency, nothing can beat NVIDIA, despite their older 5 nanometer production process. Energy efficiency of the PowerColor Reva is a little bit lower than the baseline RX 9070 XT, but definitely better than last generation's RX 7900 XTX. The underlying reason is probably the factory overclock that trades a little bit of efficiency for higher out-of-the-box performance.
Unlike some other vendors, PowerColor has decided to not go for the 16-pin power connector which is able to supply up to 600 W, but they opted for two 8-pins instead, which each are rated for up to 150 W. Combined with 75 W from the slot, that's enough juice to max out the card's power limit. What I like is that the VRM is fully populated, featuring a 10+3 configuration similar to premium cards such as the Sapphire Nitro, ASUS TUF, and ASRock Taichi. In contrast, the more basic models typically have just an 8+3 VRM configuration.
Overclocking
Overclocking worked very well on all RX 9070-series cards. The PowerColor Reva gained 8-10% in real-life performance, which is definitely more than we usually see. NVIDIA's competing Blackwell cards overclock a few percent better though. While OC isn't completely trivial it's easy enough to do, once you know what to look out for. I also like that AMD continues giving us the Hot Spot thermal sensor, which can be crucial to diagnose issues with thermal paste or cooler alignment. Also, the OC slider limits are high enough to not result in any artificial limitations.
Pricing & Alternatives
AMD has set a $600 MSRP for the RX 9070 XT, which for a long time was impossible to reach. But now, after several months, you can find some baseline models at that price point, even in the United States. In Europe, the pricing situation is much more relaxed, with plenty of cards available for the equivalent of $580 to 590. PowerColor's Reva isn't listed in the United States yet, but it's available in Europe for €700, which converts to approximately $675, excluding tax. A price increase of $75 for the Reva is definitely not low enough to make it an easy buying decision. The noise levels are undoubtedly impressive, and the product has an excellent look and feel, but is that enough? I'm slightly leaning towards yes. It was a close call between "Editor's Choice" and "Recommended," but I'm a big fan of those two qualities, and a +10% in price isn't that crazy. On the other hand, you can get an excellent experience from the Sapphire Pulse, which is definitely cheaper and of pretty decent build quality, too. If you can live with a little bit less performance, then RX 9070 non-XT could be an option, it has come down in pricing a bit and now offers 15-20% better Performance per Dollar.
NVIDIA's RTX 5070 Ti is definitely more expensive with a starting price of $750, but it offers a bit more performance, too, with the same 16 GB framebuffer and better support for upscaling/frame generation thanks to DLSS. NVIDIA's RTX 5070 is priced at $540, making it significantly cheaper than the 9070 XT. However, it is also considerably slower and has less VRAM. Despite this, its DLSS support is a major advantage, particularly if you don't intend to run games at 4K, so VRAM limitations are less of a concern. I don't think I'd choose last-generation cards from AMD or NVIDIA. However, if you can find a used card at a significant discount, it might be worth considering.
Looking ahead, we have NVIDIA's RTX 50 SUPER-series cards, which use the same GPU chips, sometimes with a few more shaders unlocked, just with bigger and faster memory chips, which boost the VRAM size by +50%. A competitively priced RTX 5070 SUPER with 18 GB could definitely spell trouble for the RX 9070 XT, even though that seems unlikely given the current DRAM pricing situation. Intel might have an ace up their sleeves, their bigger Arc Battlemage cards, like B770, could add more competition, too.