Quick Look: TangZu Audio Zetian Wu Planar Magnetic IEMs 11

Quick Look: TangZu Audio Zetian Wu Planar Magnetic IEMs

(11 Comments) »

Introduction

TangZu Audio Logo

TangZu Audio was previously known as T-Force until a trademark dispute forced the audio brand to go through a literal rebranding exercise. It decided to make the best of this scenario by adopting a theme based on China's Tang Dynasty—hence the name. Newer products also followed names of important people from said dynasty, including the Yuan Li and Shimin Li in-ear monitors. I have the Shimin Li here which is a ~$30 set using single dynamic drivers while looking like it could certainly cost much more. The build quality was also far exceeding the cost although the actual audio experience left me wanting to where I didn't even bother covering it. Then came news of a new planar magnetic set using the same 14.x mm full-range driver we've seen in the likes of the 7Hz Timeless, LETSHUOER S12, and the MUSE HiFi Power. Could this be TangZu Audio's savior?


The subject of today's article is the TangZu Audio Zetian Wu, named after the first empress consort of the Tang Dynasty who eventually usurped the crown—think strong female figure and you get the point. TangZu Audio wishes to evoke a similar result by having its take on the planar magnetic IEMs usurp the previous contenders when it comes to outright performance as well as value for money. Thanks to HiFiGo for providing a review sample to TechPowerUp as we put the Zetian Wu to the test today beginning with a look at the product specifications in the table below.

TangZu Audio Zetian Wu In-Ear Monitors
Shell:DLP 3D-printed resin shells with CNC-machined aluminium face plates
Cable:224 wire, four strand cable using 5N (99.999% pure) oxygen-free copper conductor
Driver Units:14.5 mm planar magnetic driver
Frequency Response:20 Hz–20 kHz
Sensitivity:100 dB/mW
Impedance:16 Ω
Cable Connectors:3.5 mm TRS or 4.4 mm TRRS plug to source + two 0.78 mm 2-pin plugs to IEMs
Cable Length:4 ft/1.2 m
Warranty:One year

Packaging and Accessories


I suppose if there ever had to be artwork on an audio product depicting a person then TangZu Audio does have a reasonable claim to using artistic depictions of the person that the product is named after. The Zetian Wu accordingly features the empress on the front to go with the company logo and product name. The theme carries around the entirety of this external sleeve too. On the back are product specifications to go with contact information for the company, along with confirmation on which cable connector you went with. The inner box is plain thick cardboard in black color and has the TangZu Audio logo on it. It is clasped shut from the side via two magnets and opening the box reveals a thank you note followed by a compartmentalized sorting of the contents, including the IEMs placed inside a thick foam sheet for added protection.


The carry case is certainly a strong color and larger than usual for in-ear monitors. It has the company logo on the front and uses faux leather dyed burgundy to come off fairly convincing to the eyes and when handled too. The oversized zipper helps exude a sense of good build quality via placebo and then you open the case to a soft velour lining and compartments to easily hold the IEMs and cable. Speaking of which, the cable itself is found in a plastic zip-lock bag in the mesh compartment to the top that provides enough room to store spare ear tips as well as a portable DAC/amp too.


The IEMs come with a set of silicone ear tips pre-installed and there are plenty of others found in a separate accessory tray. These come marked for what they are supposed to do although TangZu Audio perhaps should have double checked the text here given the "foam" tips are another set of silicone tips in size M. As such, you get four types of silicone ear tips with the Zetian Wu of which two sets only come in size M and the other two come in sizes S/M/L. I've seen some of these ear tips used by others, including 7Hz, to good effect.

Closer Look


The cable that ships with the TangZu Audio Zetian Wu is plenty decent but won't win any awards by itself. There are two connector plug options on the source side in the form of the 3.5 mm single-ended TRS plug I have here or a 4.4 mm balanced plug that will increase the cost of the IEMs by $5-10 depending on the vendor. These are paired with metal housings which in turn lead to an all copper cable that makes of 4-strands, 224 wires of high purity oxygen-free copper conductor braided relatively tightly. This makes for a cable that isn't the most kink-proof but also one that likes to hold its shape and necessitates roadie wrapping owing to the lower pliability on offer. It's not microphonic at least, so functionally I have few issues. The splitter and the housing on the other end use a similar bare metal finish and the cable cinch could be tighter in holding the two channel cables in place. Furthermore, there is a highly curved set of pre-formed ear hooks which then lead to two 0.78 mm 2-pin connectors that have L/R markings on the housings for channel identification. The metal plugs are gold-plated for oxidation resistance and note the circular housing used for the flush 2-pin connectors here as opposed to the usual rectangular design.


The Zetian Wu employs a mix of DLP 3D printing (digital light processing, resin printing) for the resin shells themselves which get an opaque black finish. The shells are smooth to the touch and help keep the IEMs on the lighter side of average. These are capped by a CNC-machined aluminium face plate that is anodized to come off violet/purple depending on the incident angle to signify the royalty this set is named after. The design you see on the face plates are meant to be "auspicious clouds" although I personally am happy to see a new color scheme used on IEMs that doesn't go the gaudy route either. There are multiple vents on the sides and a flush-mounted 2-pin cable housing that should work well with the cable as seen above. The pre-installed ear tips are fairly generic but do the job well enough. Removing them exposes the stubby nozzle that measures in at 6.5 mm at the end so those with smaller ear canals might struggle. The nozzle also requires a deep fit for a good seal here to further compound this issue. There are notches on the nozzle to help keep the ear tips in place once installed as well as a fine mesh filter on the end to prevent contaminants from entering the acoustic chamber.


Here is a look at two other size M silicone ear tips installed on the right shell of the Zetian Wu. They differ in bore diameter and length generally, but do try them all out and see what works best for you. Note that you may also end up having different sizes for the two ears depending on the size of your ear canals, given these biological features won't necessarily be the same for everyone. Installing the cable is simple enough with the pre-molded ear hooks that go over the ears and L/R indicators helping identify what goes where. Push the 0.78 mm 2-pin plugs into the IEM connectors as seen above, and friction will do the rest in keeping them in place.

Our Patreon Silver Supporters can read articles in single-page format.
Nov 17th, 2026 16:30 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts