SilentiumPC Fera 3 RGB Review 11

SilentiumPC Fera 3 RGB Review

A Closer Look »


SilentiumPC uses quite a small box for this single-tower cooler, with it measuring in at roughly 14.3 cm in length, 10.9 cm in width, and 18.0 cm in height. On the front, you will find the model name in bold lettering along with a close-up of the cooler which wraps around to the right side. The cooler offers RGB LEDs on both the top plate and fan with both set to blue on the box. Moving to the left side, you will find the cooler's specifications as well as the CPU sockets it supports. Turning to the back gives us an overview of the various features this cooler has, including its hydraulic bearing fan, Nano RGB controller with multiple lighting modes, and ultra-silent operation, just to name a few.

On the right is the same image from the front as it wraps around the box. Meanwhile, the top shows the company logo along with the phrase "Quality, Support, Price, Professionals." The bottom not shown here simply has the barcode.


Opening the box, you will find the cooler under a piece of foam with the heatsink squeezed between two boxes. One contains the RGB fan and the other the mounting hardware.

Everything you need and nothing you don't—SilentiumPC sticks to their simple, necessities-only approach for included hardware. That said, they do give you an extra set of fan clips in the box for running a dual-fan configuration.

Common parts supplied for mounting include:
  • 4x Fan clips
  • 4x Backplate screws
  • 4x Intel backplate screw holders
  • 4x AMD backplate screw holders
  • 4x Plastic standoffs
  • 4x Mounting bracket nuts
  • 4x LGA2011 screw pillars
  • 2x Mounting arm screws
  • 2x Intel mounting brackets
  • 2x AMD mounting brackets
  • 2x RGB 4-pin adapters
  • 1x Backplate
  • 1x Nano RGB controller
  • 1x Tube of thermal grease
  • 1x Instruction booklet
  • 1x 120 mm Sigma Pro RGB fan
  • 1x Heatsink
Next Page »A Closer Look