The Drive
The drive is designed for the M.2 2280 form factor, which makes it 22 mm wide and 80 mm long.
PCI-Express 5.0 x4 is used as the host interface to the rest of the system, which doubles the theoretical bandwidth compared to PCIe 4.0 x4.
On the PCB you'll find the controller and two flash chips.
One very interesting discovery I made is that the SM2504 controller is very thin. This means that it doesn't have the same height as the NAND flash chip that sits right next to it. For a heatsink with a flat base, like most of them, this means it won't make contact with the controller.
I solved this by folding a thermal pad a couple of layers high, thick enough to ensure contact with the heatsink base, around 0.3 mm or so. This is definitely not optimal, because heat has to travel through a lot of material before it reaches the heatsink.
Chip Component Analysis
The Silicon Motion SM2504 is a four-channel PCI-Express 5.0 controller with support for DRAM-less operation and NVMe 2.0. It is fabricated on a 6 nm TSMC production process, same as the SM2508. SM2504 supports both TLC and QLC NAND.
SMI requested to not share too many details about the flash chips, I photoshopped out any markings. The chips are modern TLC with more than 200 layers, but nothing secret or unreleased.