Thermal Stress Test
We will now perform thermal stress tests to determine whether the SSD suffers from thermal throttling. In this benchmark, the drive is repeatedly filled using sequential 1 MiB block writes at a queue depth of 32. Temperature data is collected every 3600 seconds (60 minutes) through its internal sensors, along with external readings from a thermal camera. To better simulate a real-world server environment—where active airflow is typically present—we also ran the test with a fan blowing air directly over the SSD to observe any differences in thermal behavior.
The SSD eventually reached its thermal limit of 77 °C and began throttling. According to its internal SoC sensors, once it hit 77 °C, bandwidth dropped from over 9 GB/s to around 7.6 GB/s, before recovering. This cycle repeated, with temperatures rising again and speeds falling back to 7.6 GB/s in a constant loop.
When operating with active airflow—as intended by the manufacturer, since this SSD is designed for use in server racks or systems with proper cooling, the performance remained stable, consistently reaching its rated speeds above 9 GB/s. The highest recorded temperature was below 50 °C, which is well under the thermal limit set by the manufacturer, ensuring safe and reliable operation.
Thermal Imaging
Here you can see a FLIR thermal image of the SSD during testing at full load. The external aluminium housing reached a temperature above 62 °C, while internally we could briefly see higher peaks close to 70 °C which is considered high for SSDs of this type. However, in proper environments, such as server racks with active cooling, this should not pose an issue.