SilverStone Lucid 05 Review 0

SilverStone Lucid 05 Review

A Closer Look - Inside »

A Closer Look - Outside


The SilverStone Lucid 05 sports two glass panels for a fish tank type chassis designed for ATX motherboards. The base of the case—which is also the shroud under which the PSU and storage reside—makes up part of the exterior shell, so the glass panels don't have to be the full height of the chassis.


Looking at the front, the glass is framed nice and clean with black bands at three sides. SilverStone has really avoided adding any apparent branding and considering this is a pretty OEM chassis that hasn't been modified visually, looking at it, you would not know that it is from SilverStone. In the rear, you can see that SilverStone has used a body that is similar to a classic mid-tower chassis, with the PSU located at the bottom.


The main side panel holds that second glass panel, with its framing extending that of the front for a more integrated overall design. It is also not tinted very much, so you will clearly be able to see all your hardware once assembled. On the opposite side of the case, there is a metal cover with captive thumb screws. This panel also has vents to allow for the pre-installed fans to access fresh outside air. Interestingly enough, the vent extends well below where you could mount any fans, which makes us think that SilverStone is just repurposing a panel from a different case instead of investing in the tooling to make one with a vent specific to the Lucid 05.


In the rear, at the bottom, the PSU bay sports two sets of mounting holes for utmost PSU flexibility. Above that are seven expansion slots, each protected by breakout covers. Anyone who has read our case reviews knows that we are not a fan of these, especially as SilverStone has not even included a few spare covers in the accessories kit. A sliding cover makes sure that there are no unsightly openings in the back of the chassis as well. In the very top is another 120 mm exhaust fan, which also features ARGB LEDs in the hub.


On the top, there is a magnetic dust filter, which protects the cooling mounting area from dust and grime. If you look closely, you will spot the SilverStone logo at the back corner, which is also the only hint you get to identify the brand. At the top, you may install three 120 mm fans or two of 140 mm size. That also means that the Lucid 05 can fit a 360 mm AIO, while the Lucid 04 was limited to a 280 mm variant, Besides that, there is a fully fledged set of I/O consisting of two USB-A, one USB-C and a pair of audio plugs. Some of the main components of the body aren't new, as becomes very apparent with the I/O panel. Instead of retooling the top cover to fit modern times, SilverStone reused one from when cases had two USB 2.0 ports and a single USB 3.0 plug and then converted the 2.0 ports to 3.0, while adding a filler bit to make the 3.0 a USB-C variant. This is also the reason why the case has both the power and HDD activity LEDs - something that has been phased out with newer case bodies. The only physical change is the additional square button for ARGB control, as it is much cheaper to punch a new hole for something like that, than retool the entire machine for a new top cover.


Unlike the Lucid 04, the 05 has a magnetic dust filter on the underside that goes across the whole length of the chassis. While this is fine, It would have been much nicer to have a pull-out dust filter instead.
Next Page »A Closer Look - Inside
View as single page
Nov 20th, 2026 14:03 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts