RAID Operations
We perform RAID sync operations during which we measure the time the NAS needs to complete these tasks; average power consumption for these rebuild and synchronization periods is also measured. In NAS servers with four bays or more, we rebuild and sync RAID 1, RAID 5, and RAID 6 arrays, while in smaller two-bay NAS servers, we are confined to a RAID 1 array. The Bitmap option is disabled in NAS servers that support it to produce comparable results since it speeds up RAID rebuild times.
You can set RAID sync and rebuild speeds. I selected the lower system impact option for all measurements.
| Synology DS2419+ |
|---|
| Operation | Time | AVG Power Consumption |
|---|
| RAID 1 Sync | 2:22:03 | 41.50 W |
|---|
| RAID 1 Rebuild | 1:18:11 | 40.76 W |
|---|
RAID 5 Sync (6x HDDs) | 3:16:34 | 62.28 W |
|---|
RAID 5 Rebuild (6x HDDs) | 1:15:37 | 67.96 W |
|---|
RAID 6 Sync (6x HDDs) | 3:52:22 | 62.89 W |
|---|
RAID 6 Rebuild (6x HDDs) | 1:24:07 | 71.70 W |
|---|
RAID 5 Sync (12x HDDs) | 3:31:00 | 100.21 W |
|---|
RAID 5 Rebuild (12x HDDs) | 2:37:38 | 100.25 W |
|---|
RAID 6 Sync (12x HDDs) | 3:37:53 | 100.69 W |
|---|
RAID 6 Rebuild (12x HDDs) | 2:43:06 | 100.52 W |
|---|
RAID Sync Graphs
RAID Rebuild Graphs