Test Setup

Synthetic Testing

• Tests are run with a 20-second-long warm-up time (result recording starts at second 21).
• Between each test, the drive is left idle for 60 seconds, to allow it to flush and reorganize its internal data.
• All write requests contain random, incompressible data.
• Disk cache is flushed between all tests.
• M.2 drives are tested with a fan blowing on them; that is, except for the results investigating uncooled behavior on the thermal testing page.

Real-life Testing

• After initial configuration and installation, a disk image is created; it is used to test every drive.
• Automated updates are disabled for the OS and all programs. This ensures that—for every review—each drive uses the same settings, without interference from previous testing.
• Our disk image consumes around 600 GB—partitions are resized to fill all available space on the drive.
• All drives are filled with random data to 80% of their capacity
• Partitions are properly aligned.
• Disk cache is flushed between all tests.
• In order to minimize random variation, each real-life performance test is run several times, with reboots between tests to minimize the impact of disk cache.
• All application benchmarks run the actual application and do not replay any disk traces.
• Our real-life testing data includes performance numbers for a typical high-performance HDD, using results from a Western Digital WD Black 1 TB 7200 RPM 3.5" SATA. HDDs are significantly slower than SSDs, which is why we're not putting the result in the chart, as that would break the scaling, making the SSDs indistinguishable in comparison. Instead, we've added the HDD performance numbers in the title of each test entry.

Comparison Drives

We compare the tested drive to a wide selection of SSDs currently available on the market. Besides popular drives, our focus is also on including common controller and flash type combinations.