Introduction
With memory prices continuing to plummet, now is a great time to be looking for memory upgrades. Winter hardware releases are in full swing, there is competition from both Intel and AMD, and the Red brand has thoroughly fixed the memory issues of generations past. No longer do users have to worry about memory compatibility or shopping for expensive AMD-branded kits. With 3200 MHz natively supported on the new Ryzen platform, options for enthusiasts have never been more open.
Team Group is a Taiwan-based manufacturer largely rooted in the manufacture of flash memory products. The brand has spent the past few years building a name for itself as an emergent leader in high performance memory products with their award winning T-Force brand. T-Force offers a whole roster of gaming memory with a focus on striking designs and high performance.
The Team Group T-Force Xtreem is one of my favorite non-RGB memory kits, with a beautiful machined heat sink that is as hefty as they come. As the name implies, the new TeamGroup T-Force Xtreem ARGB takes the Xtreem into a whole new direction. With massive addressable RGB LED zones, the TeamGroup T-Force Xtreem ARGB is as modern as they come. However, as the specifications on my sample will attest, the TeamGroup T-Force Xtreem ARGB retains the most important element from its older non-RGB sibling: performance.
The TeamGroup T-Force Xtreem ARGB kit I have for testing today is specced at 16 GB (2 x 8 GB) 3600 MHz with 14-15-15-35 timings at 1.45 V. This is as good as it gets for the Ryzen platform. With twice the benchmarks to go through, let's not waste any more time! How will the TeamGroup T-Force Xtreem ARGB perform?
Specifications
| Specifications |
|---|
| Manufacturer: | TeamGroup |
|---|
| Model: | TF10D416G3600HC14CDC01 |
|---|
| Speed Rating: | DDR4-3600 |
|---|
| Rated Timings: | 14-15-15-35 |
|---|
| Tested Capacity: | 16 GB (8 GB x2) |
|---|
| Tested Voltage: | 1.45 V |
|---|
| PCB Type: | 10 layers |
|---|
| Registered/Unbuffered: | Unbuffered |
|---|
| Error Checking: | Non-ECC |
|---|
| Form Factor: | 288-pin DIMM |
|---|
| Warranty: | Limited Lifetime |
|---|
Packaging
The TeamGroup T-Force Xtreem ARGB comes in a cardboard box with a beautifully printed sleeve that depicts the Xtreem ARGB stick front and center. "T-Force DDR4 Gaming Xtreem ARGB" is printed across the top, along a basic specifications sticker. The compatible RGB control software badges feature along the bottom, as does the "The power from Teamgroup" slogan.
The back of the sleeve has a paragraph about the T-Force brand, as well as a bullet list of the standout Xtreem ARGB features. Inside the sleeve, the black box has the T-Force logo printed in metallic silver.
Inside is a traditional molded plastic tray as well as a microfiber cleaning cloth. The memory sticks are held firmly and kept quite safe from all but the most careless handling.
A Closer Look
The original T-Force Xtreem was a hefty design made entirely out of aluminium. The new Xtreem ARGB is mostly a plastic construction for the diffusion of the new addressable RGB LEDs.
TeamGroup wouldn't forget about performance just to add some pretty lights. The aluminium heat spreader over the memory ICs is more than enough to deal with the relatively minimal heat output of DDR4.
"Xtreem ARGB" is printed on the mirror silver strip of each stick. The 3600 MHz XMP timings of 14-15-15-35 at 1.45 V are ideal for AMD's new Ryzen 3000 or Threadripper 3 processors.
The T-Force Logo is etched into the center of each stick, while "T-Force" is printed on the angled top.
The TeamGroup Xtreem ARGB sticks are single-sided and use a 10-layer PCB for added stability. Given the timings, it is no surprise that these are Samsung B-die chips.
I like to weigh a stick from each kit I get as the difference in mass can be pretty drastic between kits. Mass is not the best indicator of cooling efficiency because material can matter, and of course, heat dissipation is reliant on surface area, not volume or mass. That said, it is still interesting to compare.
The TeamGroup T-Force Xtreem ARGB comes in at 65.33 g on my scale, which is on the high end. The copper alloy heat spreader is heavier than aluminium counterparts. For height, the TeamGroup T-Force Xtreem ARGB comes in at just over 49.76 mm with my calipers, right in the average 45–50 mm range, which is good for cooler clearance.