Turtle Beach Burst II Pro Review 9

Turtle Beach Burst II Pro Review

Packaging, Weight, Cable & Feet »

Introduction

Turtle Beach Logo


Founded in 1975, Turtle Beach is a US-based audio and peripherals company. Whereas the Burst II Air was restricted to 1000 Hz (USB full-speed), the Burst II Pro offers 8000 Hz polling (USB high-speed) in both wired and wireless operation. In addition, the sensor has been upgraded to PixArt's PAW3950 capable of 30,000 CPI. "Titan"-branded optical switches rated for 100 million clicks still see use for the main buttons, though these actually are from Kailh instead of TTC. Turtle Beach advertises up to 150 hours of battery life at 1000 Hz and up to 40 hours at 8000 Hz, with even longer battery life being possible with Bluetooth, and to achieve these numbers, a massive 800 mAh battery is used, which also increases the weight of the Burst II Pro over the Air by 10 g, to 56 g. NVIDIA Reflex is supported, allowing one to measure click latency in real time on compatible monitors, and the feet are made of pure PTFE. The usual configuration options are present in Swarm II. The Burst II Air is available in either black or white.



Specifications

Turtle Beach Burst II Pro
Size:122.2 mm × 67.3 mm × 39.2 mm
Size (inches):4.81" × 2.65" × 1.54"
Ambidextrous:Partially (side buttons on left side only)
Weight:56 g
Number of Buttons:6 (including wheel click)
Main Switches:Titan Optical Switch (100 M)
Wheel Encoder:ALPS (black), 11 mm
Sensor:PixArt PAW3950
Resolution:50–30,000 CPI
Microcontroller Unit:Realtek RTL8762GTH
Polling Rate:1000/2000/4000/8000 Hz
Cable:1.80 m, braided
Software:Yes
Price:$139.99
Warranty:Two years
Next Page »Packaging, Weight, Cable & Feet
View as single page
Nov 20th, 2026 13:41 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts