WD Blue SN5100 2 TB Review - Impressive QLC 78

WD Blue SN5100 2 TB Review - Impressive QLC

(78 Comments) »

Value and Conclusion

  • According to Sandisk, the WD Black SN5100 2 TB will sell for $150.
  • Fastest QLC SSD we ever tested
  • Excellent real-life performance
  • Good energy efficiency
  • Will run fine without heatsink
  • Large SLC cache
  • 4 TB variant available
  • Compact form factor
  • High price, more expensive than most TLC SSDs
  • Low write speeds when SLC cache exhausted
  • No DRAM cache
  • PCIe 4.0 interface
  • Thermal throttling when heavily loaded
Technology & Positioning
The WD Blue SN5100 is Sandisk's new QLC-value-Gen 4 SSD option. It replaces the SN5000/SN5000S, which has been on the market for around a year now. The update introduces a new, faster controller, the same as on the WD SN7100, and new BiCS8 QLC NAND flash with 218-layers. This is a big step up from the 112-layer TLC BiCS5/162-layer QLC BiCS6 that was used on the various predecessor models. As expected from a drive with a value positioning, a DRAM cache is not available, but the drive will use 64 MB of the system's memory for the mapping tables of the SSD. You might notice "Sandisk" mentioned frequently in this review. That's because the company has taken over Western Digital's SSD operations. Western Digital will now shift its focus to mechanical hard drives. Curiously, the SN5100 still bears the "WD" label instead of "Sandisk,"—I suspect the rebranding will be a gradual process in the months ahead.

Synthetic Performance
The WD Black SN5100 performed very well in our synthetic testing, particularly in random read QD1, which is exceptionally high. This metric is the most important one for a consumer drive and is the foundation for strong real-life performance. Sequential transfers were within the expected range for a Gen 4 SSD. As anticipated for a QLC-based SSD, the write speeds were slightly lower, but not dramatically so. However, what matters much more is real-life testing, because all controllers are optimized for typical synthetic reviewer workloads on a mostly empty drive. Our real-life testing is designed to run actual applications, not disk traces that compress time by assuming infinitely fast hardware and software. We're even running those tests with the drives filled to 85% capacity, not empty. This approach puts additional pressure on the various algorithms and the SLC cache, just like in real-life.

Real-Life Performance
In our real-world tests, Sandisk's new WD Blue performs very well for a QLC-based SSD. There's not a single test that shows any of the shortcomings that we previously encountered with QLC SSDs—everything is chugging along nicely at very good speeds. And that's even with the drive 85% full. The only hint of QLC that I'm seeing is in the 75 GB write test, where the drive falls behind a bit, but not by a huge amount. In all the other tests the drive is performing better than most of the older TLC based SSDs on the market, and is roughly able to match or beat big names like the Samsung 980 Pro, WD SN850, Kingston KC3000, Solidigm P44 Pro. The top Gen 4 SSDs remain slightly faster: the Crucial T500, Lexar NM790, Samsung 990 Pro, and Kioxia Exceria Plus G4 are 2-3% ahead. The WD Black SN7100 and WD SN850X lead with a 4% advantage. Definitely not the night-and-day difference that we've seen from QLC in the past. The SN5100 shows a performance improvement of about 25% compared to older QLC drives like the Crucial P1. It also easily outperforms other QLC-based SSDs, such as the Kingston NV3. Additionally, the SN5100 is more than twice as fast as the Samsung 870 QVO.

SLC Cache / Sustained Performance
Sandisk has configured their drive with a 466 GB SLC cache, which is a large size for a 2 TB QLC drive. It means that 91% of the drive's capacity will be used in SLC mode first, which consumes four times the storage per byte, at much higher speed. Filling the whole 2 TB capacity completed at 516 MB/s, which is a disappointing result when compared to modern TLC drives that reach several GB/s here. This is without a doubt the weakest point of the SN5100. While it's still considerably faster than other QLC drives in this test, if you plan on writing a lot of data (200 GB+) in a short time, with a multi-GB/s source (i.e. not downloaded from the internet), then you should consider TLC-based alternatives.

Power Consumption / Heat
In terms of power consumption and energy efficiency, the SN5100 ranks near the top of our efficiency chart, offering the best energy efficiency for a QLC SSD by a significant margin. Just like other WD SSDs, we couldn't get the drive to reach its lowest ASPM power state in a laptop scenario. We've encountered this before, and it seems to be a peculiarity of the WD controllers on our test bench. I'm convinced that the drives can reach the lowest power state in a laptop.

This high energy efficiency not only reduces power consumption but also decreases heat output, lowering the cooling requirements accordingly. Sandisk ships the SN5100 without heatsink or heat spreader and that's fine for the normal usage that the drive is targeted at. Our real-life thermal test shows that there's plenty of headroom before the throttle point is reached. In our thermal stress test we do see some throttling on the bare drive, but that went away quickly once we added a small heatsink.

Pricing & Alternatives
According to Sandisk, the SN5100 will sell for $150, which is completely unrealistic and way too high for a QLC-based SSD. At that price point, the WD SN7100 ($130) is a much better buy, it's the fastest PCIe 4.0 SSD we've ever tested, and it's TLC-based. I would definitely also prefer the various Maxiotech MAP1602-based TLC drives like the Lexar NM790, which sell for around $120—cheaper, faster, and TLC. This leads me to believe that there's some error with pricing for the SN5100. I'd say that a reasonable price for the drive is sub-$110, at which point it would still be much more expensive than the cheapest 2 TB SSDs on the market, which start selling at $90. Of course these offer lower performance, but for a lot of people it's just important than their storage is affordable. I doubt that either your parents or mine care about a slight difference in performance for the light tasks they handle. At such a price point the SN5100 would also be able to compete well with the Kingston NV3 ($110), and Crucial P3+ ($120). Drives from Samsung are a bit too expensive to be strong alternatives, but Sandisk/WD's own offerings could be viable alternatives, like the WD SN570, SN580, SN770, but these are being phased out it seems, the used market should have plenty of them though.

If this current absurd pricing is resolved, the SN5100 should be an excellent choice for budget-conscious buyers. I would have loved to give it our "Recommended" award, but at the current price of $150, it's just too expensive. If it were priced around $100, I would have even awarded it "Recommended" + "Great Value."
Discuss(78 Comments)
View as single page
Nov 19th, 2026 00:08 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts